SANICLAY: simple anisotropic clay plasticity model

SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following K_o consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd.     

Radon variations in a Hungarian village

 A steady radon exhalation is assumed in most publications. In a village of North-East Hungary, however, high radon concentrations have been measured, differing strongly in neighbouring houses and varying in time, due to the interplay of geochemical phenomena. Received: 20 November 1995 · Accepted: 18 June 1996     

Generating interface waves using a freely falling, instrumentedsource

In recent years, interface waves such as the Scholte wave have become important tools in the study of the geoacoustic properties of near-bottom seafloor sediments. Traditionally, these waves have been generated by explosive or pneumatic sources deployed at or near the seafloor and monitored by ocean-bottom seismographs or geophone arrays. While these sources generate the requisite interface waves, they also produce higher frequency compressional waves in the water and sediment that tend to contaminate the surface wave and make inversion of the data difficult in the near field. In this paper, a new source consisting of a freely falling projectile instrumented with an accelerometer is described. When the projectile impacts the bottom, the exact time history of the vertical force applied to the sediment is known and therefore may be convolved with the transfer function of a sediment geoacoustic model to produce accurate synthetic seismograms. Moreover, the vertical force applied to the seafloor is very efficient in generating surface wave motion while producing very little compressional wave energy so that the near-field signals are much more easily analyzed. An example of the use of the new source is presented including inversion of the received signals to obtain shear-wave velocity and attenuation as a function of depth in the near bottom sediments at a shallow-water site     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Paleostress-tensor analysis of late deformation events in the Odenwald Crystalline Complex and comparison with other units of the Mid-German Crystalline Rise, Germany

Summary Geometric data of fault planes and fault plane lineations, together with the observed sense of shear on the slip planes, were used to calculate paleostress tensors and fields responsible for the post metamorphic peak D3 and D4 deformation events in the four Odenwald units sensu Krohe (1991). The paleostress fields were calculated using the method of Will and Powell (1991). As inferred from the paleostress analysis, the D3 strike-slip deformation west of the Otzberg fault zone was caused by a, ± N-S directed, compressional regional stress field, with shallowly plunging σ₁ axes and σ₃ directions that plunge at shallow to moderate angles to the E or W; the calculated mean orientations are: σ₁ 06 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. The B?llsteiner Odenwald east of the Otzberg fault zone was not affected by this stress field. This implies that the Bergstr?sser and B?llsteiner Odenwald were spatially separated and formed independent crustal blocks during D3. The D4 faulting event is recognised in all areas investigated, even though most prominently in units III and IV, and juxtaposed the Bergstr?sser and B?llsteiner Odenwald. This faulting episode was caused by a paleostress field with a steeply westerly plunging σ₁ axis and a shallowly southsoutheasterly plunging σ₃ axis. The orientations of the principal stresses are: σ₁ 52 → 270, σ₂ 38 → 085 and σ₃ 06 → 174. With continued deformation from D3 to D4, there was a progressive change in the orientation of the stress field indicating a change from a N-S compressional to extensional stress field, accompanied by the progressive development of strike-slip faults and late normal faults. Paleostress field orientations in the Pfalz Forest, SW of the Odenwald, determined by Fl?ttmann and Oncken (1992) are very similar to those obtained for the Odenwald region and indicate a regionally consistent stress pattern in the southwestern part of the Mid-German Crystalline Rise (MGCR) during strike-slip and normal faulting deformations.

---

Zusammenfassung Paleostress-Tensor Analyse sp?ter Deformationsereignisse im Odenwald-Kristallin und ein Vergleich mit anderen Einheiten der Mitteldeutschen Kristallinzone, Deutschland Für die vier Odenwald-Einheiten im Sinne von Krohe (1991) wurden Pal?ostressfelder für die Blattverschiebungs- und Abschiebungsereignisse D3 und D4 mit der Methode von Will und Powell (1991) berechnet. Die Analyse ergibt, da? das regionale Spannungsfeld, das westlich der Otzberg-Zone im Bergstr?sser Odenwald zum D3-Ereignis führte, ein ± N-S gerichtetes kompressives Stresssfeld war. Die σ₁-Achse f?llt flach nach N bzw. S ein, die σ₃-Achse mit kleinen bis moderaten Winkeln nach E bzw. W; die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 08 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. Der B?llsteiner Odenwald, ?stlich der Otzberg-Zone, wurde von diesem Spannungsfeld nicht erfa?t. Dies impliziert, da? Bergstr?sser und B?llsteiner Odenwald w?hrend des D3-Ereignisses voneinander getrennt waren und separate Krusteneinheiten darstellten. Auswirkungen der D4-Deformation k?nnen im gesamten Untersuchungsgebiet erkannt werden, am st?rksten jedoch in den Einheiten III und IV. Dieses Ereignis wurde von einem Pal?ostressfeld mit einer steil nach W einfallenden σ₁- und einer flach nach SSE einfallenden σ₃-Achse verursacht und führte zum Zusammenschlu? von Bergstr?sser und B?llsteiner Odenwald. Die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 52 → 270, σ₂ 38 → 085 und σ₃ 06 → 174. Die Rotation der Hauptspannungsrichtungen war mit einer ?nderung von einem kompressionalen N-S gerichteten (D3) hin zu einem extensionalen (D4) Stressfeld verbunden. Die erzielten Ergebnisse sind sehr ?hnlich mit Resultaten, die Fl?ttmann und Oncken (1992) im Pf?lzer Wald ermittelten. Dies weist auf ein regional übereinstimmendes Spannungsfeld im SW-Teil der Mitteldeutschen Kristallinzone hin.

---

---

Received July 8, 1999; revised version accepted March 28, 2000     

Magnetic reconnection in high-temperature plasma of solar flares

Quasi-steady high-temperature current sheets are an energy source during the main or hot phase of solar flares. Such sheets are shown to be stabilized with respect to the tearing instability by a small transverse component of magnetic field existing in the sheets.     

Silica phase transformations in the petroliferous sequences

The joint evolution of organic matter and silica in petroliferous sequences is considered in the terms of the laws of transformation of dispersion systems. The dispersion systems are transformed under conditions of low-temperature solid-phase processes accompanied by the silica phase transition and dehydration that favors the evolution of organic matter.     

The wadic project: A comprehensive field evaluation of directional wave instrumentation

The results of a comprehensive field trial of nearly all commercially available directional wave measurement systems at the Edda field in the North Sea during winter 1985-86 are presented. The results summarize the accuracy of the principal engineering wave parameters from each system and the dependence on sea state. Limiting factors on system performance and operational problems are also included in the assessment. Overall experience has been good with systems utilizing widely different measurement principles returning consistent results.