Observations of flux rope – associated particle bursts with GEOTAIL in the distant tail

Geotail energetic particle, magnetic field data and plasma observations (EPIC, MGF and CPI experiments) have been examined for a number of energetic particle bursts in the distant tail (120Re < |X_GSM| < 130 Re), associated with moving magnetic field structures, following substorm onsets. The features obtained from this data analysis are consistent with the distant magnetotail dynamics determined first by ISEE3 observations and explained in terms of the neutral line model. At the onset of the bursts, before plasma sheet entrance, energetic electrons appear as a field-aligned beam flowing in the tailward direction, followed by anisotro-pic ions. Within the flux rope region, suprathermal ions exhibit a convective anisotropy, which allows determination of the plasma flow velocity, assuming that the anisotropy arises from the Compton-Getting effect. The velocities thus determined in the plasma sheet are estimated to be 200–650 km/s, and compare favourably with the velocities derived from the CPI electron and proton experiment. The estimated length of magnetic field structures varies between 28 and 56 Re and depends on the strength of the westward electrojet intensification. Finally, the three structures reported here show clear magnetic field signatures of flux rope topology. The existence of a strong magnetic field aligned approximately along the Y-axis and centred on the north-to-south excursion of the field, and the bipolar signature in both By and/or Bz components, is consistent with the existence of closed field lines extending from Earth and wrapping around the core of the flux rope structure.     

Prediction of the measured response of a scaled soil-pile-superstructure system

The validity of the Winkler foundation model is investigated by predicting the experimentally measured displacement transfer functions and strain spectra of a single pile embedded in a sandbox and supporting a single-degree-of-freedom superstructure. The foundation-superstructure system is a scale model and was subjected to shake table excitations. The distributed springs and dashpots of the Winkler foundation model are frequency dependent and the calibrated model predicts satisfactorily the displacement transfer function at different depths for both fixed- and free-tip pile conditions. On the other hand, the pile-axial-strains are substantially underestimated when expressed in terms of the second derivative of the computed elastic line of the pile. It is shown that a much more dependable prediction is achieved when pile-axial-strains are expressed in terms of the inertial forces acting along the pile-superstructure system.     

The ClBrI composition of 3.23 Ga modified seawater: implications for the geological evolution of ocean halide chemistry

Fluid inclusion leachates obtained from vug and vein quartz samples from an Archean (3.23 Ga) Fe-oxide hydrothermal deposit in the west-central part of the Barberton greenstone belt, South Africa, were analyzed by ion chromatography for chloride, bromide, and iodide. The deposit, known as the ironstone pods, formed by seafloor hydrothermal activity and fluid discharge. Quartz is dominated by type I liquid-vapor, aqueous inclusions with a bimodal salinity distribution (0–0.25 M_Cl⁻ and 0.9–1.8 M_Cl⁻). Bulk analytical salinities range from 0.45 to 0.99 M_Cl⁻ represent averages of type I inclusions. Bulk fluid inclusion bromide and iodide concentrations are 1.44–3.32 mM and 0.01–0.12 mM, respectively. For comparison, modern seawater has halogen contents of 590 mM chloride, 0.9 mM bromide, and 0.5 μM total iodine. In the fluids from the ironstone pods, bromide and iodide are enriched relative to chloride, when compared with modern seawater.Approximate Br⁻Cl⁻ and I⁻Cl⁻ ratios of 3.2 Ga Barberton seawater are 2.5 × 10⁻³ and 40 × 10⁻⁶, respectively. Dispersion to higher values was caused principally by reaction with organic sediments whose trends are similar to those seen for modern vent fluids at unsedimented and sedimented ridges, relative to modern seawater. These halide ratios are greater than those of modern seawater, suggesting a change in the halide ratios of seawater over geological time. The analytical data are consistent with a model in which marine organic sedimentation has fractionated bromine and iodine out of seawater relative to chloride, thereby causing the halide ratios of seawater to decrease from high early and mid-Archean values towards their present day values.     

Simulation studies of processes associated with stimulated electromagnetic emission (SEE) in the ionosphere

Results of numerical simulation studies of processes associated with Stimulated Electromagnetic Emission (SEE) produced during ionospheric heating experiments are presented. A one-dimensional magnetized electrostatic Particle-In-Cell (PIC) simulation model with uniform plasma density is used to investigate electrostatic wave generation in the region where the pump frequency ω₀ approximately equals the upper hybrid frequency ω_uh. In particular, the simulation plasma is driven with a uniform oscillating electric field to represent the long wavelength pump wave and power spectra of the electrostatic waves produced are taken. The pump wave frequency and amplitude are varied to consider the effects on the simulation power spectrum. The upper hybrid frequency in the model is varied through harmonics of the electron cyclotron frequency Ω_ce to consider the effects of stepping the pump frequency through cyclotron harmonics. The power spectrum from the simulation plasma is richly structured. The resulting power spectra show sidebands upshifted and downshifted from the pump frequency by multiples of the lower hybrid frequency ω_lh. The structure of the spectrum is highly sensitive to the proximity of the upper hybrid frequency to the cyclotron harmonic frequencies.     

Optical effects in the aurora caused by ionospheric HF heating

Ionospheric heating experiments were done by the EISCAT Heater in Tromsø on 15–19 November, 1993. A low-light TV camera was installed at the VLF receiving station at Porojärvi about 100 km to the south-east of Tromsø. The spectral analysis of the auroral luminosity variations showed that the brightness of the aurora varied at the modulation frequency of the heating wave. The results of this analysis and the numerical simulations of the auroral luminosity variations caused by the HF heating are shown. The variations of the optical emission intensity at the heating frequency occur during the auroral ionosphere modification. The observed intensity variation of the auroral green line during the interval of enhanced electron temperature is explained by a decreasing rate of the O₂⁺ ion dissociative recombination when the electron temperature increases. The brightness variation depends on the characteristic energy and the intensity of the auroral electron flux and the heating wave parameters. The artificial luminosity pulsations caused by HF heating are estimated.     

Simulation of normal distributed smooth fields by Karhunen-Loéve expansion in combination with kriging

Simulation of multigaussian stochastic fields can be made after a Karhunen-Loéve expansion of a given covariance function. This method is also called simulation by Empirical Orthogonal Functions. The simulations are made by drawing stochastic coefficients from a random generator. These numbers are multiplied with eigenfunctions and eigenvalues derived from the predefined covariance model. The number of eigenfunctions necessary to reproduce the stochastic process within a predefined variance error, turns out to be a cardinal question. Some ordinary analytical covariance functions are used to evaluate how quickly the series of eigenfunctions can be truncated. This analysis demonstrates extremely quick convergence to 99.5% of total variance for the 2nd order exponential (‘gaussian’) covariance function, while the opposite is true for the 1st order exponential covariance function. Due to these convergence characteristics, the Karhunen-Loéve method is most suitable for simulating smooth fields with ‘gaussian’ shaped covariance functions. Practical applications of Karhunen-Loéve simulations can be improved by spatial interpolation of the eigenfunctions. In this paper, we suggest interpolation by kriging and limits for reproduction of the predefined covariance functions are evaluated.     

Temporal evolution of HF-excited plasma waves, measured at different pump frequencies by stimulated electromagnetic emission (SEE)

Experimental results concerning the growth and decay times of different spectral components of stimulated electromagnetic emission (SEE) are presented. A new method of measurement, employing a special pulsed pump scheme for the ionospheric plasma modification, has been elaborated and applied for studying HF-induced processes with high time resolution. The measurements performed show that the development and relaxation of different SEE features have an intricate pattern which depends on the emission frequency shift from the pump frequency, on the proximity of the pump frequency to the gyroharmonic frequencies, on the intensity of artificial ionospheric turbulence, and on the ionospheric conditions. The scope of this method for studies of HF plasma turbulence is discussed.     

Recursive seismic ray modelling: applications in inversion and VSP

The recursive nature of rays in blocky models can be exploited to solve some difficult problems in seismic modelling. Each segment of a ray travels from an initial point up to a reflecting interface, where it is split into reflected and transmitted ray segments, which each continue in a similar way. The tree structure that thus emanates is conveniently handled by a recursive scheme. Recursion allows an automatic generation of all phases on a seismogram, together with all information necessary to analyse or select them. By operating recursively with a ray cell, bounded by a pair of vicinal rays in 2D, or a triplet of vicinal rays in 3D, and two successive isochrons, the two-point ray-tracing problem is reduced to a simple interpolation. Also, the cellular approach allows for a stable and robust evaluation of dynamic ray quantities without any paraxial tracing, which is cumbersome in blocky models of realistic complexity. Geometric shadows are filled by recursively generated diffractions. The recursive ray tracer has found applications in the fast computation of Green's functions in target-oriented inversion and in phase identification in VSP.