An operational model to simulate post-accidental radionuclide transfers in Toulon marine area: preliminary development

As part of its development of post-accident management tools, the French Institute for Radiological Protection and Nuclear Safety is setting up a model to simulate radionuclide dispersion in the Toulon marine area (one of France’s main military ports). The model is based on the MARS 3D code developed by IFREMER. It reproduces hydro-sedimentation phenomena in the Bay of Toulon with a horizontal spatial resolution of 100 m and 30 vertical sigma levels and also factors in radioactive decay and dissolved/particulate distribution of the radionuclides studied. With no tide, the major currents in this area are generated by the wind. The model effectively reproduces the resulting hydrodynamic phenomena, which were measured throughout the summer of 2009 in the channel that links the Little Bay to the Large Bay of Toulon. When the Mistral (wind from the West/Northwest) blows, a surface current quickly appears, which pushes water southwards from the Little Bay, and which is offset by a bottom current (upwellings). When the wind blows from the East, the currents move in the opposite direction, and southeasterly waves, dependent on wind strength and fetch, occur in the Large Bay. Here, we give an example of the simulated dispersion of radionuclides released directly into the surface waters near the Arsenal, demonstrating the constraint relative to dispersion generated by the half-closed configuration of the Little Bay. Sediment in the Little Bay also forms an area where the most highly reactive radionuclides would accumulate, and where the lack of waves has the effect of considerably limiting the phenomena of resuspension.     

Failure of dams arranged in series or in complex

A practical methodology has been developed for predicting flows generated by dam failures or malfunctions in a complex or a series of dams. A twofold approach is followed. First, the waves induced in the downstream reservoirs are computed, as well as hydrodynamic impacts induced on downstream dams and dikes are estimated. Second, the flood wave propagation and the inundation process are simulated in the downstream valley, accounting for possible dam collapse or breaching in cascade. Two complementary flow models are combined: a two-dimensional fully dynamic model and a simplified lumped model. At each stage, the methodology provides guidelines to select the most appropriate model for efficiently computing the induced flows. Both models handle parametric modeling of gradual dam breaching. The procedure also incorporates prediction of breach formation time and final width, as well as sensitivity analysis to compensate for the high uncertainties remaining in the estimation of breach parameters. The applicability of the modeling procedure is demonstrated for a case study involving a 70-m high-gravity concrete dam located upstream of four other dams.     

Growth of the European abalone (Haliotis tuberculata L.) in situ: Seasonality and ageing using stable oxygen isotopes

The ormer, Haliotis tuberculata is the only European abalone species commercially exploited. The determination of growth and age in the wild is an important tool for fisheries and aquaculture management. However, the ageing technique used in the past in the field is unreliable. The stable oxygen isotope composition (¹⁸O/¹⁶O) of the shell depends on the temperature and oxygen isotope composition of the ambient sea water. The stable oxygen isotope technique, developed to study paleoclimatological changes in shellfish, was applied to three H. tuberculata specimens collected in north-west Brittany. For the specimens collected, the oxygen isotope ratios of the shell reflected the seasonal cycle in the temperature. From winter-to-winter cycles, estimates of the age and the annual growth increment, ranging from 13 to 55 mm per year were obtained. This study shows that stable oxygen isotopes can be a reliable tool for ageing and growth studies of this abalone species in the wild, and for validating other estimates.     

Validation of Forecast Cloud Parameters from Multispectral AIRS Radiances

The well-known CO₂ slicing technique which provides retrievals of cloud parameters (effective height and amount) is adapted in light of model validation using multispectral infrared sounders. The technique is applied to both real Atmospheric Infrared Sounder (AIRS) radiances and to corresponding radiances simulated from global 6 h and 12 h forecasts for the 31 days of July 2008. The forecast model is the one used operationally at the Canadian Meteorological Centre. Radiances are simulated from the Radiative Transfer for the Television and Infrared Observation Satellite (TIROS) Operational Vertical Sounder (RTTOV) model. When compared to model output of cloud parameters, simulated retrievals help us understand systematic biases linked to the retrieval technique. Systematic errors of interest, attributed to forecast cloud parameters, are then more clearly assessed from real retrievals. This is the central idea of this paper. The proposed definition of model cloud top, based on cloud transmittance, corresponds well to the height derived from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) instrument. These lidar-derived cloud heights, in turn, confirm the nature of the biases produced by the CO₂ slicing technique (e.g., a negative bias increasing with height to about 2 km (approximately 50 hPa) for the highest clouds at 16 km (approximately 100 hPa)). Results suggest that the model has a tendency to produce an excess of low-level clouds below 2 km, compensated for by a deficit from 3 to 6 km. No significant differences are found between 6 h and 12 h forecast monthly fields, an indication that the model has sufficiently spun-up after a few hours. Retrieved global monthly cloud parameter fields are compared to independently derived products available from the Moderate Resolution Imaging Spectrometer (MODIS) and AIRS standard processing. Significant differences are noted, linked to the different retrieval approaches, input data and resolution. This is further evidence that, for validation purposes, definitions of observed and model parameters must be consistent.     

Assessing groundwater storage in the Kairouan plain aquifer using a 3D lithology model (Central Tunisia)

The aquifer of the semi-arid Kairouan plain has been exploited for decades to supply the growing irrigated agriculture and the need of drinking water. In parallel, the major hydraulic works drastically changed the natural groundwater recharge processes. The continuous groundwater level drop observed since the 1970s naturally raises the question of groundwater storage sustainability. To date, hydrogeological studies focused on groundwater fluxes, but the total amount of groundwater stored in the aquifer system has never been fully estimated. This is the purpose of the present paper. A complete database of all available geological, hydrogeological and geophysical data was created to build a 3D lithology model. Then, the lithological units were combined with the hydraulic properties to estimate the groundwater storage. Over the 700 km² of the modelled area, the estimated storage in 2013 was around 18?×?10⁹ m³ (equivalent to 80 times the annual consumption of 2010) with a highly variable spatial distribution. In 45 years (1968–2013), 12% of the amount of groundwater stored in the aquifer has been depleted. According to these results, individual farms will face strong regional disparities for their access to groundwater in the near future.     

Computation of the space and time evolution of equilibrium-line altitudes on Andean glaciers (10°N–55°S)

A previous study of Fox [Fox, A.N. 1993. Snowline altitude and climate at present and during the Last Pleistocene Glacial Maximum in the Central Andes (5°–28°S). Ph.D. Thesis. Cornell University.] showed that for a fixed 0 °C isotherm altitude, the equilibrium-line altitude (ELA) of the Peruvian and Bolivian glaciers from 5 to 20°S can be expressed based on a log–normal expression of local mid-annual rainfall amount (P). In order to extrapolate the function to the whole Andes (10°N to 55°S) a local 0 °C isotherm altitude is introduced. Two applications of this generalised function are presented. One concerns the space evolution of mean inter-annual ELA for three decades (1961–1990) over the whole South American continent. A high-resolution data set (grid data: 10′ for latitude/longitude) of mean monthly air surface temperature and precipitation is used. Mean annual values over the 1961–1990 period were calculated. On each grid element, the mean annual 0 °C isotherm altitude is determined from an altitudinal temperature gradient and mean annual temperature (T) at ground level. The 0 °C isotherm altitude is then associated with the annual precipitation amount to compute the ELA. Using computed ELA and the digital terrain elevation model GTOPO30, we determine the extent of the glacierised area in Andean regions under modern climatic conditions. The other application concerns the ELA time evolution on Zongo Glacier (Bolivia), where inter-annual ELA variations are computed from 1995 to 1999. For both applications, the computed values of ELA are in good agreement with those derived from glacier mass balance measurements.     

Osmium,tungsten, and chromium isotopes in sediments and in Ni‐rich spinel at the K‐T boundary: Signature of a chondritic impactor

Abstract— It is now established that a large extraterrestrial object hit the Earth at the end of the Cretaceous period, about 65 Ma ago. We have investigated Re‐Os, Hf‐W, and Mn‐Cr isotope systems in sediments from the Cretaceous and the Paleogene in order to characterize the type of impactor. Within the Cretaceous‐Tertiary (K‐T) boundary layer, extraterrestrial material is mixed with terrestrial material, causing a dilution of the extraterrestrial isotope signature that is difficult to quantify. A phase essentially composed of Ni‐rich spinel, formed in the atmosphere mainly from melted projectile material, is likely to contain the extraterrestrial isotopic signature of the impactor. We show that the analysis of spinel is indeed the best approach to determine the initial isotope composition of the impactor, and that W and Cr isotopes confirm that the projectile was a carbonaceous chondrite.     

Seasonal and monthly hydrological budgets of a fen‐dominated forested watershed,James Bay region,Quebec

The hydrology of Quebec, Canada, boreal fens is poorly documented. Many peatlands are located in watersheds with impounded rivers. In such cases, their presence influences reservoir inflows. In recent years, some fens have been subjected to an increase of their wet area, a sign that they may be evolving towards an aquatic ecosystem. This dynamic process is called aqualysis. This article presents the seasonal and monthly hydrological budgets of a small watershed including a highly aqualysed fen (James Bay region). The monitoring of precipitation (P), runoff (Q) and groundwater levels (WL) was conducted during the ice‐free season. Three semiempirical equations (Thornthwaite, Priestley–Taylor and Penman–Monteith) were used and compared to calculate potential evapotranspiration. The first two equations, having fewer parameters, estimate higher potential evapotranspiration values than the third equation. The use of pressure‐level gauges installed in wells, for the calculation of peatland water storage, is inconclusive. Swelling of peat, peat decomposition and plant composition could be responsible for nonnegligible amounts of absorbed water, which are not entirely accounted for by well levels. The estimation of peat matrix water storage is potentially the largest source of error and the limiting factor to calculate water balances in this environment. The results show that the groundwater level and the water storage vary depending on the season and especially after a heavy rainfall. Finally, the results illustrate the complexity of water routing through the site and thus raise several questions to be resolved in the future. Copyright © 2012 John Wiley & Sons, Ltd.