Dynamic Performance Investigation of A Spar-Type Floating Wind Turbine Under Different Sea Conditions

Both numerical calculation and model test are important techniques to study and forecast the dynamic responses of the floating offshore wind turbine (FOWT). However, both the methods have their own limitations at present. In this study, the dynamic responses of a 5 MW OC3 spar-type floating wind turbine designed for a water depth of 200 m are numerically investigated and validated by a 1:50 scaled model test. Moreover, the discrepancies between the numerical calculations and model tests are obtained and discussed. According to the discussions, it is found that the surge and pitch are coupled with the mooring tensions, but the heave is independent of them. Surge and pitch are mainly induced by wave under wind wave conditions. Wind and current will induce the low-frequency average responses, while wave will induce the fluctuation ranges of the responses. In addition, wave will induce the wavefrequency responses but wind and current will restrain the ranges of the responses.     

Numerical Simulation of the Vortex-Induced Vibration of A Curved Flexible Riser in Shear Flow

A series of fully three-dimensional(3 D) numerical simulations of flow past a free-to-oscillate curved flexible riser in shear flow were conducted at Reynolds number of 185–1015. The numerical results obtained by the two-way fluid–structure interaction(FSI) simulations are in good agreement with the experimental results reported in the earlier study. It is further found that the frequency transition is out of phase not only in the inline(IL) and crossflow(CF) directions but also along the span direction. The mode competition leads to the non-zero nodes of the rootmean-square(RMS) amplitude and the relatively chaotic trajectories. The fluid–structure interaction is to some extent reflected by the transverse velocity of the ambient fluid, which reaches the maximum value when the riser reaches the equilibrium position. Moreover, the local maximum transverse velocities occur at the peak CF amplitudes, and the values are relatively large when the vibration is in the resonance regions. The 3 D vortex columns are shed nearly parallel to the axis of the curved flexible riser. As the local Reynolds number increases from 0 at the bottom of the riser to the maximum value at the top, the wake undergoes a transition from a two-dimensional structure to a 3 D one. More irregular small-scale vortices appeared at the wake region of the riser, undergoing large amplitude responses.     

Optimization Design of Minimum Total Resistance Hull Form Based on CFD Method

In order to reduce the resistance and improve the hydrodynamic performance of a ship, two hull form design methods are proposed based on the potential flow theory and viscous flow theory. The flow fields are meshed using body-fitted mesh and structured grids. The parameters of the hull modification function are the design variables. A three-dimensional modeling method is used to alter the geometry. The Non-Linear Programming (NLP) method is utilized to optimize a David Taylor Model Basin (DTMB) model 5415 ship under the constraints, including the displacement constraint. The optimization results show an effective reduction of the resistance. The two hull form design methods developed in this study can provide technical support and theoretical basis for designing green ships.     

Experimental Study on Sloshing Characteristics in the Elastic Tank Based on Morlet Wavelet Transform

Hydroelastic effect of sloshing is studied through an experimental investigation. Different excitation frequencies are considered with low-fill-depth and large amplitude. Morlet wavelet transform is introduced to analyze the free surface elevations and sloshing pressures. It focuses on variations and distributions of the wavelet energy in elastic tanks. The evolutions of theoretical and experimental wavelet spectra are discussed and the corresponding Fourier spectrums are compared. Afterwards, average values of the wavelet spectra are extracted to do a quantitative study at various points. From the wavelet analysis, sloshing energies are mainly distributed around the external excitation frequency and expanded to high frequencies under violent condition. In resonance, experimental wavelet energy of the elevation in elastic tanks is obviously less than that in the rigid one; for sloshing pressures, the elastic wavelet energy close to the rigid one and conspicuous impulse is observed. It recommends engineers to concern the primary natural frequency and impulsive peak pressures.     

Lateral Bearing Capacity of Modified Suction Caissons Determined by Using the Limit Equilibrium Method

The modified suction caisson (MSC) adds a short-skirted structure around the regular suction caissons to increase the lateral bearing capacity and limit the deflection. The MSC is suitable for acting as the offshore wind turbine foundation subjected to larger lateral loads compared with the imposed vertical loads. Determination of the lateral bearing capacity is a key issue for the MSC design. The formula estimating the lateral bearing capacity of the MSC was proposed in terms of the limit equilibrium method and was verified by the test results. Parametric studies on the lateral bearing capacity were also carried out. It was found that the lateral bearing capacity of the MSC increases with the increasing length and radius of the external skirt, and the lateral bearing capacity increases linearly with the increasing coefficient of subgrade reaction. The maximum lateral bearing capacity of the MSC is attained when the ratio of the radii of the internal compartment to the external skirt equals 0.82 and the ratio of the lengths of the external skirt to the internal compartment equals 0.48, provided that the steel usage of the MSC is kept constant.     

Strength Analysis on Brace Structure for Semi-Submersible in Consideration of Wave Slamming

Slamming on bracings of column stabilized units shall be considered as a possible limiting criterion under transit condition based on the requirements in DNV-OS-C103. However, the wave slamming loads under survival condition were ignored for the strength analysis of the brace structures in many semi-submersible projects. In this paper, a method of strength analysis of brace structure is proposed based on the reconstruction and extrapolation of numerical model. The full-scale mooring system, the wind, wave and current loads can be considered simultaneously. Firstly, the model tests of the semi-submersible platform in wind tunnel and wave tanker have been carried out. Secondly, the numerical models of the platform are reconstructed and extrapolated based on the results of model tests. Then, a nonlinear numerical analysis has been conducted to study the wave slamming load on brace in semi-submersible platform through the reconstructed and extrapolated numerical model. For the randomness of wave load, ten subcases under each condition have been carried out. The value of the 90% Gumble distribution values of the ten subcases are used. Finally, the strength on brace structure has been analyzed considering the wave slamming. The wave slamming loads have been compared between the survival condition and transit condition with the method. The results indicate that wave slamming under survival condition is more critical than that under transit condition. Meanwhile, the wave slamming is significant to the structural strength of the brace. It should be overall considered in the strength analysis of the brace structure.     

大亚湾西部海域沉积物中生物硅的含量及其分布特征

采用2. 0 mol/dm~3Na_2CO_3溶液5h单点化学提取-硅钼蓝连续分光光度分析法分别测定了大亚湾西部海域13个表层沉积物和1个沉积物岩芯中生物硅的含量.表层沉积物和沉积物岩芯中生物硅含量占比分别为0. 69%～2. 02%和1. 24%～2. 05%,平均值分别为1. 42%和1. 60%.结果证实西大亚湾沉积物中生物硅含量水平与我国南海近岸海域基本一致.在210Pbex测年的基础上,通过分析沉积物岩芯中生物硅、有机物、无机碳等多指标,揭示近百年来大亚湾周边环境变化对海洋环境的影响,证实了上世纪80年代以来西大亚湾周边农业、海水养殖业和工业发展等人类活动加剧了该海域生态环境变化,尤其90年代核电站运行对海洋生态变化造成一定的影响.     

一维综合孔径微波辐射计遥感海面温度的敏感性分析

一维综合孔径微波辐射计能够有效提高观测的空间分辨率,其观测入射角通常在0°~55°范围内变化。为了开发适用于一维综合孔径微波辐射计的海面温度反演算法,需要评估其观测亮温对海洋大气环境要素的敏感性。利用海面发射率模型和大气辐射传输模型,构建了适用于一维综合孔径微波辐射计的微波海洋大气辐射传输模式,研究了C波段垂直和水平极化微波辐射亮温在不同入射角下对海洋大气环境要素的敏感性变化情况,并定量计算了相应的敏感系数。结果表明:垂直和水平极化亮温对海洋大气环境要素的敏感性表现出不同的特性。随着入射角的增大,垂直极化亮温对海面温度的敏感性增强,对海面风场的敏感性相对减弱;水平极化亮温则相反。由大气水汽含量和云液态水含量误差引入的垂直和水平极化亮温误差随入射角增大而增大,但是,即使在55°的大入射角下垂直和水平极化亮温误差仍小于0.12 K。对于海面温度反演精度优于1 K的要求,一维综合孔径微波辐射计的测温精度需优于0.6 K。研究结果对于一维综合孔径微波辐射计海面温度反演算法的研究和载荷设计具有一定的理论指导意义。     

基于云模型的海岸脆弱性评估 ——以厦门岛为例

脆弱性评估很大程度上存在着模糊性和随机性,为有效解决评估过程中定性概念与评估指标按隶属函数定量描述这一不确定转换问题,本文基于云理论本文选取海岸地貌、海岸高程、海岸坡度、海岸缓冲能力、有效波高、道路价值和建筑价值为指标,构建了厦门岛海岸脆弱性评估指标体系,运用云模型评估手段定量测度了厦门岛海岸脆弱性空间分异特征。评估结果与客观情况比较吻合,检验了指标体系的合理性和评估模型的适用性。本文提出了海岸脆弱性综合评估模型,实用有效,可以推广到与厦门岛类似的区域,为海岸管理及规划提供科学指导。     

全球Argo资料共享与服务平台设计与实现

Argo资料已成为海洋环境和气候变化研究重要的实测资料来源和基础数据支撑。自2007年全球Argo实时海洋观测网建成以来,每年产生的Argo资料稳固增长,数据总量呈现出海量增长趋势,如何实时有效地对Argo数据进行组织管理与信息服务已成为当前Argo资料共享的关键难题。本文针对Argo数据多源异构的时空特性及多元化的信息服务需求,综合运用分布式混合数据库架构,设计了一种适用于全球Argo资料组织管理的弹性扩展云存储模型,建立了基于Matlab的Argo网格化产品高效可视化方法,构建了基于Flex RIA的WebGIS服务框架,并研制了"全球Argo资料共享与服务平台"实例。平台实现了对全球Argo资料的查询浏览、快速下载及可视化分析等功能,并已在中国Argo实时资料中心部署及对外服务。