Changes in future precipitation over South Korea using a global high-resolution climate model

We used daily precipitation data from a global high-resolution climate scenario to analyze the features of future precipitation including extreme and heavy rainfall. The scenario shows that the model reproduces the daily precipitation over South Korea well. The projections show an increase in annual precipitation of approximately 18% in the late 21st century, with the highest increase (38%) occurring in winter. The number of days with daily precipitation of less than 5 mm decreases, but that of daily precipitation of more than 5 mm increases slightly in the latter part of the 21st century. The peak of precipitation days shifted from July to August. The number of days with relatively small amounts of precipitation (10 and 30 mm d^?1) increases most substantially in the winter season, but that for large amounts of precipitation (50, 80, 100, and 130 mm d^?1) increases most in the summer season. Events with heavy precipitation rates of 100 and 130 mm d^?1 are expected to occur in the winter season in the late 21st century, although no such events occurred during the winter season in the reference period.     

Laplace–Fourier-Domain Waveform Inversion for Fluid–Solid Media

Full waveform inversion algorithms are widely used in the construction of subsurface velocity models. In the following study, we propose a Laplace–Fourier-domain waveform inversion algorithm that uses both Laplace-domain and Fourier-domain wavefields to achieve the reconstruction of subsurface velocity models. Although research on the Laplace–Fourier-domain waveform inversion has been published recently that study is limited to fluid media. Because the geophysical targets of marine seismic exploration are usually located within solid media, waveform inversion that is approximated to acoustic media is limited to the treatment of properly identified submarine geophysical features. In this study, we propose a full waveform inversion algorithm for isotropic fluid–solid media with irregular submarine topography comparable to a real marine environment. From the fluid–solid system, we obtained P and S wave velocity models from the pressure data alone. We also suggested strategies for choosing complex frequency bands constructed of frequencies and Laplace coefficients to improve the resolution of the restored velocity structures. For verification, we applied our Laplace–Fourier-domain waveform inversion for fluid–solid media to synthetic data that were reconstructed for fluid–solid media. Through this inversion test, we successfully restored reasonable velocity structures. Furthermore, we successfully extended our algorithm to a field data set.     

Rates of fluvial bedrock incision within an actively uplifting orogen: Central Karakoram Mountains, northern Pakistan

Terrestrial cosmogenic nuclide (TCN) ¹⁰Be surface exposure ages for strath terraces along the Braldu River in the Central Karakoram Mountains range from 0.8 to 11 ka. This indicates that strath terrace formation began to occur rapidly upon deglaciation of the Braldu valley at  11 ka. Fluvial incision rates for the Braldu River based on the TCN ages for strath terraces range from 2 to 29 mm/a. The fluvial incision rates for the central gorged section of the Braldu River are an order of magnitude greater than those for the upper and lower reaches. This difference is reflected in the modern stream gradient and valley morphology. The higher incision rates in the gorged central reach of the Braldu River likely reflect differential uplift above the Main Karakoram Thrust that has resulted in the presence of a knickpoint and more rapid fluvial incision. The postglacial fluvial incision rate (2–3 mm/a) for the upper and lower reaches are of the same order of magnitude as the exhumation rates estimated from previously published thermochronological data for the Baltoro granite in the upper catchment region and for the adjacent Himalayan regions.     

Coastal Pollution Mitigation with Lime and Zero Valent Iron

The Taiwan Strait region has many miles of coastline, and the Taiwan Straits Tunnel (TST) project faces many potential pollution problems as construction proceeds through sensitive areas. Conventional approaches for pollution mitigation require further examination. The recent development of nanoscale particle technology has shown distinct advantages for contaminant attenuation and ground improvement. This paper is focused on trace metals and is part of the overall effort to develop the nanoscale particle technology. Trace metals in ground and surface waters represent a continued threat to human and ecological health. One of the difficulties in removing toxic concentrations of trace metals from solution is the variable oxidation state and amphoteric nature of multiple constituents. In particular, while cationic metals (e.g., Pb²⁺, Cd²⁺, Ni²⁺) may be rendered less mobile under high pH conditions, anionic metals (e.g., AsO₄ ^3?, CrO₄ ^2?, SeO₄ ^2?)may become more mobile. The objective of this research was to evaluate the sorption of both cationic and anionic trace elements, including arsenic (As), cadmium (Cd), chromium (Cr) and selenium (Se) under batch conditions. Mixtures of a local residual soil were tested alone and in combination with lime and zero valent iron. It was hypothesized that lime would raise the pH and precipitate positively charged metals while zero valent iron would create reducing conditions favorable to the immobilization of negatively charged metals. Results indicate that the use of lime and/or zero valent iron can increase the sorption capacity of soil. Compared to the baseline soil, sorption capacity increased with addition of lime for arsenic and cadmium while it decreased for chromium and selenium. In the case of zero valent iron addition, sorption capacity increased for cadmium, chromium and selenium, while showing no change for arsenic. When both lime and zero valent iron were used, the sorption capacity increased for all metals tested. These results suggest that the combined use of lime and zero valent iron may serve as an alternative treatment technology for removing trace metals from contaminated water systems.     

Gap size effect on the tribological characteristics of the roller for deep-sea mining robot

To design the deep-sea mining robot, it is essential to analyze the tribological characteristics of its roller. In this study, we introduced the dynamic simulation model to analyze the tribological characteristics of the roller for deep-sea mining robot, considering the temperature, viscosity, viscous damping force, and gap size between the inner and outer rib seals. Effective viscosity changes with gap size in micro/nanoscale while the effective viscosity is equal to the kinematic viscosity in macroscale. For the stable operation of the roller, the effective viscosity must be less than the critical viscosity. As the gap size decreases, the effective viscosity increases while the critical viscosity decreases. This study shows that the gap size between the inner and outer rib seals of roller is the most dominant factor in designing the roller for deep-sea mining robot to use at relatively low temperatures that are found in the deep-sea environments.     

Growth and reproduction of the Japanese mantis shrimp, <Emphasis Type="Italic">Oratosquilla oratoria</Emphasis> (De Haan 1844) in the coastal area of Tongyeong,Korea

Growth and reproduction of the Japanese mantis shrimp, Oratosquilla oratoria, were investigated in the Tongyeong, Korea from July 2014 to August 2015. A total of 2,621 samples (1,380 females and 1,241 males) were collected during the study period. Females were observed more frequently than males. The mean body length (BL) was 128.5 ± 0.38 mm in females and 126.9 ± 0.42 mm in males. The mean body weight (BW) was 31.2 ± 0.28 g in females and 31.1 ± 0.32 g in males. There was a significant difference in the length-frequency distribution between females and males. The relationship between BL and BW was lnBW = 2.85 × lnBL - 10.43 for females and lnBW = 2.87 × lnBL -10.52 for males. The gonadosomatic index (GSI) varied on a monthly basis. The GSI reached a maximum in May and a minimum in November. The highest values of the GSI coincided with the spawning period of O. oratoria. Larger individuals of O. oratoria have their spawning season earlier than smaller ones. The size at sexual maturity of females was estimated as 96.5 mm. The Von Bertalanffy growth function parameters were BL_∞ = 184.5 mm, K = 0.72 year^?1, C = 0.36 and WP = 0.45 for females and BL_∞ = 183.75 mm, K = 0.82 year^?1, C = 0.38 and WP = 0.22 for males. The growth of males was slightly faster than females. The present study will help with the fisheries management of O. oratoria based on ecological parameters.     

Occurrence of gorgosterol in diatoms of the genus Delphineis

The presence of the C₃₀ sterol gorgosterol (22,23-methylene-23,24-dimethylcholest-5-en-3ß-ol) and its analogues in some marine and freshwater environments is generally associated with invertebrate animals or dinoflagellates since there have been no reports of them in other microalgal classes. Here we show that two unialgal cultures of different species of the marine diatom Delphineis contain gorgosterol in addition to sterols more commonly found in diatoms. Our findings suggest that some reports of gorgosterol in seawater and marine sediments may well have an origin, at least in part, from diatoms.     

Seasonal and spatial characteristics of seawater and sediment at Youngil Bay, southeast coast of Korea

The seasonal geochemical characteristics of the seawater and sediments and the major factors causing heavy metal contamination were investigated at the Youngil bay and the Hyungsan river estuary in the Southeast Coast of Korea, where a world-scale steel-industry complex (Pohang iron and steel industrial complex, POSCO) is located. The seasonal and spatial distribution characteristics of temperature, dissolved oxygen (DO), pH, and nutrients of the seawater were studied at 45 fixed stations, especially focusing on the river mouth area. Sediments at 27 stations were examined during winter and summer to determine the major controlling factors for the distribution of metals, using correlation matrix and R-mode factor analyses, and to evaluate the pollution status, using the modified geoaccumulation (I(geo)(')) index. Temperatures for the effluent from the POSCO located at the Hyungsan river mouth were 2-3 degrees C higher compared to other sampling areas, due to the thermal discharge from the POSCO. The DO concentration of the surface water at the Pohang old port was as low as 2-4 mg/L. In spring, the DO value at the Hyungsan river mouth was higher than 12 mg/L, by the mass multiplication of phytoplanktons at the river mouth where seawater temperature and nutrients concentrations were relatively high, resulting in the pH value of higher than 8.3. The nitrogen to phosphorus (N/P) ratios at the river mouth were 20-150 times higher compared to other areas, implying that the nitrogen loading into this semi-enclosed bay is significantly higher than phosphorus and the major nitrogen sources are not only the domestic sewage from the city but the industrial wastewater from the POSCO and other steel factories nearby. The phosphorus concentrations at the Pohang old port were shown 3-10 times higher than those at other stations, due to the inflow of pollutants generated from the nearby ships anchoring and the release of phosphate from the bottom sediment. Results from the sediment analysis showed that the major controlling factors for the distribution pattern of each metal are grain size and organic carbon (C(org)) content. Based on the factor analysis, Al, Fe, Cr, Li, and Pb were shown strongly correlated with the mean grain size (Mz), whereas Cd, Cu, Zn, and Sn with the C(org) content. Results from the fractionation of the sedimentary metals into lattice and labile fractions to characterize the mobility of sediment metals showed that the mineral lattice fraction was high in the order of Al=K>Cr>Li>Sr>Fe, while the labile fraction, which might be released to the overlying water, was in the order of Pb>Zn>Cd>Cu>Ca>Sn. Evaluation of the sediment pollution status by applying (I(geo)(')) of 13 metals showed Cd, Cu, and Zn as high as 1-3 range at the old port. Even though the overall marine pollution mainly by the world-class steel industrial complex in this semi-enclosed bay area studied does not currently pose a serious threat, due to the seawater circulation and the large influx of river discharge, the countermeasures to implement the sediments concentrated with heavy metals, especially at the old port with no seawater circulation, are still warranted for this coastal water environment.     

Study of method for synthetic precipitation data for ungauged sites using quantitative precipitation model

A method was developed to estimate a synthetic precipitation record for ungauged sites using irregular coarse observations. The proposed synthetic precipitation data were produced with ultrahigh hourly resolution on a regular 1 × 1 km grid. The proposed method was used to analyze selected real-time observational data collected in South Korea from 2010 to the end of 2014. The observed precipitation data were measured using the Automatic Weather System and Automated Synoptic Observing System. The principal objective of the proposed method was to estimate the additional effects of orography on precipitation introduced by ultrahigh- resolution (1 × 1 km) topography provided by a digital elevation model. The Global Forecast System analysis of the National Centers for Environmental Prediction was used for the upper-atmospheric conditions, necessary for estimating the orographic effects. Precipitation data from 48 of the more than 600 observation sites used in the study, which matched the grid points of the synthetic data, were not included in the synthetic data estimation. Instead, these data were used to evaluate the proposed method by direct comparison with the real observations at these sites. A bias score was investigated by comparison of the synthetic precipitation data with the observations. In this comparison, the number of Hit, False, Miss, and Correct results for 2010-2014 was 74738, 25778, 7544, and 367981, respectively. In the Hit cases, the bias score was 1.22 and the correlation coefficient was 0.74. The means of the differences between the synthetic data and the observations were 0.3, -3.9, -14.4, and -34.9 mm h^-1 and the root mean square errors (RMSEs) were 2.7, 8.3, 19.3, and 39.6 mm h^-1 for the categories of 0.5-10.0, 10.0-30.0, 30.0-50.0, and 50.0-100.0 mm h^-1, respectively. In addition, in each range, the 60% difference between the synthetic precipitation data and the observation data was -1.5 to +1.5, -5.0 to +5.0, -17.0 to +17.0, and -33.0 to +33.0 mm h^-1, respectively. Overall, the correlation coefficient of the synthetic precipitation data was > 0.7 for 43 of the 48 test stations and the RMSE was < 4 mm h^-1 at 31 stations. The results are significant at all evaluation stations at the 0.05 significance level.