The Mid-atlantic Ridge (31°S–34°30′S): Temporal and spatial variations of accretionary processes

The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr⁻¹, a transitional velocity between the very slow (≤20 mm yr⁻¹) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr⁻¹) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.     

Large-scale vertical hydroacoustic structure of the North Atlantic and its seasonal variability

A classification based on the number and types of large-scale acoustic waveguides is proposed for the mean seasonal profiles of sound speed propagation. A scheme for North Atlantic zoning, using typical curves of the sound speed vertical distribution, is given. The channel axis's position is shown not to depend on the water mass haline properties, being controlled by the temperature field vertical stratification.Translated by Vladimir A. Puchkin.     

Shallow-Water Gasohydrothermal Vents of Ushishir Volcano and the Ecosystem of Kraternaya Bight (The Kurile Islands)

Abstract. A marine ecosystem in the crater of the Ushishir Volcano (Kraternaya Bight, Yankich Island, the Kuriles) showing gasothcrmal activity was studied for hydrographical, hydrochemical, and biological characteristics. Maximal changes in chemical and biological characteristics were observed in the surface water layer of 0–5 m. This layer had higher water temperature, was saturated with volcanogcnic carbon dioxide (up to 2000 10^-6 torr), ovcrsaturatcd with oxygen (up to 200 %), and contained high concentrations of chlorophyll a. Hydrogen sulfide was found in the surface water layer and at a depth of 15 m in the area of maximal effect of volcanic effluents.
The planktonic community is characterized by high rates of production and destruction of organic matter only in the 0–5 m layer. Daily vertical migrations of the ciliatc Mesodinium rubrum were observed, which caused "red tides".
Bacterial, algobacterial, and diatom mats developed on the bottom of the bight in the zone of gasohydrothermal vents and in areas of volcanic water seeping. The rate of organic matter production in algobacterial mats reached 33.4g C-rrr²-d^-l, chcmolithotrophy predominating. Bottom settlements had high population density and great animal biomass, which reached 10 kg m^-2 in gasohydrothermal fields. They obtain sufficient energy from primary production of microphy-tobenthos, algobacterial, and bacterial mats. Bcnthic species dominant in the bight were not found off the Ushishir Islands.
Some species of macrobenthos inhabiting the Kraternaya Bight differ markedly in size and biomass from the same species found beyond the bight.     

Validation of a time-domain strip method to calculate the motions and loads on a fast monohull

The paper presents a comparison between experimental data and numerical results of the hydrodynamic coefficients and also of the wave induced motions and loads on a fast monohull model. The model with 4.52 m length was constructed in Fibre Reinforced Plastic (FRP), and made up of 4 segments connected by a backbone in order to measure sectional loads. The objective of the investigation was to assess the capability of a nonlinear time domain strip method to represent the nonlinear and also the forward speed effects on a displacement high speed vessel advancing in large amplitude waves. With this objective in mind the experimental program included forced oscillation tests in heaving and pitching, for a range of periods, three different amplitudes and several speeds of advance. In head regular waves comprehensive ranges of wave periods, wave steepness and speeds, were tested in order to measure heave, pitch and loads in three cross sections.

The numerical method assumes that the radiation and diffraction hydrodynamic forces are linear and the nonlinear contributions arise from the hydrostatics and Froude–Krilov forces and the effects of green water on deck. The assumption of linearity of the radiation forces is validated by comparing calculated hydrodynamic coefficients with experimental data for three different amplitudes of the forced oscillations. Both global coefficients and sectional coefficients are compared. The motions and loads in waves are compared in terms of first and higher harmonic amplitudes and also in terms of sagging and hogging peaks.     

On the use of grate-turbulators for tests of microstructural probes

Highly sensitive microstructural probes subjected to noise disturbances are free of these in laboratory tests. This leads necessarily to the working out of methods for complex testsin situ. The paper reports on the successful use for this purpose of a grate (net) suspended from a free-falling probe. The grate sets up turbulence with reproducible structure in the area of sensor location.UDK 551.46.085     

Preliminary attempt to characterize the rotation of seafloor in the Pito Deep area of the Easter Microplate using a submersible magnetometer

Several mechanisms have been proposed to account for the rotation of the nearly north-south abyssal hill fabric formed on the East Pacific Rise north of the Easter Microplate to the nearly east-west trends in the northern microplate interior. Proposed mechanisms include rigid microplate rotation, transform fault – parallel shear, and bookshelf faulting during the transfer of lithosphere from the Nazca Plate to the microplate. We used a submersible magnetometer on a NAUTILE dive program to measure the magnetic vector rotation of a pillow basalt and dike spur near Pito Deep, the present location of the tip of the propagating rift system that created the microplate. Our results, although too limited to draw strong conclusions from, suggest clockwise rotations of the seafloor magnetic vectors inconsistent with the transform-parallel shear model, and larger than can be explained solely by rigid microplate rotation.     

Comments on the Gravity and Magnetic Anomalies of Saros Bay using Wavelet Approach

In this paper, residual and regional gravity and magnetic anomalies of Saros Bay are separated using wavelet method. Wavelet is one of the modern, stochastic image approaches processing technique in electronics. The vertical, horizontal and diagonal components of wavelet output are evaluated simultaneously and an underground model is obtained by suitable cross-sections. Thus the geological and tectonic properties of Saros Bay are extracted. Our proposed model is confirmed by deep and shallow seismic researches of Turkish Petroleum Cooperation (TPAO). The South-East region of Saros Graben is formed by strike slip Ganos Fault and Anafartalar reverse Fault that lies on the east of Ganos Fault. On the Northwest region, there is strike slip component fault resulting in the Enez Graben. Here we detected two new oval type geological structure, both of them starting from the Eastern direction of Canakkale Dardanelles and but one of them continuing through Gelibolu Peninsuls, while the other tending to the Enez Graben. We think that these structures are the ruins of a very old sea in this region. This revised version was published online in November 2006 with corrections to the Cover Date.     

Geomorphological evidence for upslope canyon-forming processes on the northern KwaZulu-Natal shelf,SW Indian Ocean,South Africa

A geomorphological and statistical analysis of slope canyons from the northern KwaZulu-Natal continental margin is documented and compared with submarine canyons from the Atlantic margin of the USA. The northern KwaZulu-Natal margin is characterized by increasing upslope relief, concave slope-gradient profiles and features related to upslope growth of the canyon forms. Discounting slope-gradient profile, this morphology is strikingly similar to canyon systems of the New Jersey slope. Several phases of canyon incision indicate that downslope erosion is also an important factor in the evolution of the northern KwaZulu-Natal canyon systems. Despite the strong similarities between the northern KwaZulu-Natal and New Jersey slope-canyon systems, key differences are evident: (1) the concavity of the northern KwaZulu-Natal slope, contrasting with the ∼linear New Jersey slope; (2) the relative isolation of the northern KwaZulu-Natal canyons, rather than the dense clustering of the New Jersey canyons; and (3) the absence of strongly shelf-breaching canyons along the northern KwaZulu-Natal margin. In comparison with the New Jersey margin, we surmise a more youthful stage of canyon evolution, a result of either the canyons themselves being younger or the formative processes being less active. Less complicated patterns of erosion resulting from reduced sediment availability have developed in northern KwaZulu-Natal. The reduction in slope concavity on the New Jersey margin may be the result of grading of the upper slope by intensive headward erosion, a process more subdued—or less evident—on the KwaZulu-Natal margin.