Late Silurian (Ludlow–Přídolí) microfossils and sedimentation in the Welsh Basin near Clun,Shropshire

The base of the Clun Forest Formation at Clun, Shropshire, has previously been taken to correlate with the base of the Downton Castle Sandstone Formation (Přídolí Series, upper Silurian) on the basis of brachiopod, bivalve, gastropod and ostracod faunas. The detailed distribution of microfossils (acritarchs, chitinozoans, conodonts and ostracods) is documented at Nantyrhynau Quarry, Clun, Shropshire, to test this correlation. Three new species of chitinozoans, Eisenackitina clunensis, Eisenackitina kerria and Angochitina paucispinosa, are described from the quarry. Macrofossil and ostracod distributions suggest that the correlation is correct. However, a typical Ludlow acritarch flora is present throughout the section and suggests that the basal part of the Clun Forest Formation is Ludlow in age. The mixture of characteristic Ludlow and Přídolí microfossils at Nantyrhynau Quarry may be the result of differing environmental conditions between the Ludlow (shelf) and Clun (basinal) areas at this time. Alternatively, the strata exposed at Nantyrhynau Quarry may represent a period towards the end of the Ludlow Series when there are no strata represented in corresponding shelf sections due to non-deposition or erosion. © 1997 John Wiley & Sons, Ltd.     

Fundamental considerations for the design of non-linear viscous dampers

An Erratum has been published for this article in Earthquake Engineering and Structural Dynamics 2000; 29(7):1076. Two interrelated issues related to the design of non-linear viscous dampers are considered in this paper: structural velocities and equivalent viscous damping. As the effectiveness of non-linear viscous dampers is highly dependent on operating velocities, it is important to have reliable estimates of the true velocity in the device. This should be based on the actual relative structural velocity and not the commonly misused spectral pseudo-velocity. This is because if spectral pseudo-velocities (PSV) are used, they are based on design displacements (S_v=ω₀S_d) and are thus fundamentally different from the actual relative structural velocity. This paper examines the difference between these two velocities, and based on an extensive study of historical earthquake motions proposes empirical relations that permit the designer to transform the well-known spectral pseudo-velocity to an actual relative structural velocity for use in design. Non-linear static analysis procedures recommended in current guidelines for the design of structural systems with supplement damping devices are based on converting rate-dependent device properties into equivalent viscous damping properties based on an equivalent energy consumption approach. Owing to the non-linear velocity dependence of supplemental devices, an alternative approach for converting energy dissipation into equivalent viscous damping is advanced in this paper that is based upon power consumption considerations. The concept of a normalized damper capacity (ϵ) is then introduced and a simple design procedure which incorporates power equivalent linear damping based on actual structural velocities is presented. Copyright © 1999 John Wiley & Sons, Ltd.     

Characterization of the subsurface architecture and identification of potential groundwater paths in a clay-rich floodplain using multi-electrode resistivity imaging

The interaction between surface water and groundwater in clay-rich fluvial environments can be complex and is generally poorly understood. Airborne electromagnetic surveys are often used for characterizing regional groundwater systems, but they are constrained by the resolution of the method. A resistivity imaging survey has been carried out in the Macquarie Marshes (New South Wales, Australia) in combination with water chemical sampling. The results have enabled the identification of buried palaeochannels and the location of potential recharge points. The data have been compared with previously published airborne electromagnetic data in the same area. Deeper less conductive features suggest that there is a potential connection between the Great Artesian Basin and groundwater contained within the shallow sand aquifer. Even though the chemistry of the groundwater samples does not indicate interaction with the Great Artesian Basin, the observed discontinuity in the saprolite implies potential for this to happen in other locations.     

Stormy geomorphology: geomorphic contributions in an age of climate extremes

The increasing frequency and/or severity of extreme climate events are becoming increasingly apparent over multi‐decadal timescales at the global scale, albeit with relatively low scientific confidence. At the regional scale, scientific confidence in the future trends of extreme event likelihood is stronger, although the trends are spatially variable. Confidence in these extreme climate risks is muddied by the confounding effects of internal landscape system dynamics and external forcing factors such as changes in land use and river and coastal engineering. Geomorphology is a critical discipline in disentangling climate change impacts from other controlling factors, thereby contributing to debates over societal adaptation to extreme events. We review four main geomorphic contributions to flood and storm science. First, we show how palaeogeomorphological and current process studies can extend the historical flood record while also unraveling the complex interactions between internal geomorphic dynamics, human impacts and changes in climate regimes. A key outcome will be improved quantification of flood probabilities and the hazard dimension of flood risk. Second, we present evidence showing how antecedent geomorphological and climate parameters can alter the risk and magnitude of landscape change caused by extreme events. Third, we show that geomorphic processes can both mediate and increase the geomorphological impacts of extreme events, influencing societal risk. Fourthly, we show the potential of managing flood and storm risk through the geomorphic system, both near‐term (next 50 years) and longer‐term. We recommend that key methods of managing flooding and erosion will be more effective if risk assessments include palaeodata, if geomorphological science is used to underpin nature‐based management approaches, and if land‐use management addresses changes in geomorphic process regimes that extreme events can trigger. We argue that adopting geomorphologically‐grounded adaptation strategies will enable society to develop more resilient, less vulnerable socio‐geomorphological systems fit for an age of climate extremes. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Archival photogrammetric analysis of river–floodplain systems using Structure from Motion (SfM) methods

In this study we evaluate the extent to which accurate topographic data can be obtained by applying Structure from Motion (SfM) photogrammetric methods to archival imagery. While SfM has proven valuable in photogrammetric applications using specially acquired imagery (e.g. from unmanned aerial vehicles), it also has the potential to improve the precision of topographic data and the ease with which can be produced from historical imagery. We evaluate the application of SfM to a relatively extreme case, one of low relative relief: a braided river–floodplain system. We compared the bundle adjustments of SfM and classical photogrammetric methods, applied to eight dates. The SfM approach resulted in data quality similar to the classical approach, although the lens parameter values (e.g. focal length) recovered in the SfM process were not necessarily the same as their calibrated equivalents. Analysis showed that image texture and image overlap/configuration were critical drivers in the tie‐point generation which impacted bundle adjustment quality. Working with archival imagery also illustrated the general need for the thorough understanding and careful application of (commercial) SfM software packages. As with classical methods, the propagation of (random) error in the estimation of lens and exterior orientation parameters using SfM methods may lead to inherent systematic error in the derived point clouds. We have shown that linear errors may be accounted for by point cloud registration based on a reference dataset, which is vital for the further application in quantitative morphological analyses when using archival imagery. Copyright © 2016 John Wiley & Sons, Ltd.     

3‐D uncertainty‐based topographic change detection with structure‐from‐motion photogrammetry: precision maps for ground control and directly georeferenced surveys

Structure‐from‐motion (SfM) photogrammetry is revolutionising the collection of detailed topographic data, but insight into geomorphological processes is currently restricted by our limited understanding of SfM survey uncertainties. Here, we present an approach that, for the first time, specifically accounts for the spatially variable precision inherent to photo‐based surveys, and enables confidence‐bounded quantification of 3D topographic change. The method uses novel 3D precision maps that describe the 3D photogrammetric and georeferencing uncertainty, and determines change through an adapted state‐of‐the‐art fully 3D point‐cloud comparison (M3C2), which is particularly valuable for complex topography. We introduce this method by: (1) using simulated UAV surveys, processed in photogrammetric software, to illustrate the spatial variability of precision and the relative influences of photogrammetric (e.g. image network geometry, tie point quality) and georeferencing (e.g. control measurement) considerations; (2) we then present a new Monte Carlo procedure for deriving this information using standard SfM software and integrate it into confidence‐bounded change detection; before (3) demonstrating geomorphological application in which we use benchmark TLS data for validation and then estimate sediment budgets through differencing annual SfM surveys of an eroding badland. We show how 3D precision maps enable more probable erosion patterns to be identified than existing analyses, and how a similar overall survey precision could have been achieved with direct survey georeferencing for camera position data with precision half as good as the GCPs'. Where precision is limited by weak georeferencing (e.g. camera positions with multi‐metre precision, such as from a consumer UAV), then overall survey precision can scale as n^‐½ of the control precision (n = number of images). Our method also provides variance–covariance information for all parameters. Thus, we now open the door for SfM practitioners to use the comprehensive analyses that have underpinned rigorous photogrammetric approaches over the last half‐century. Copyright © 2017 John Wiley & Sons, Ltd.     

Simulation of rock failure modes in thermal spallation drilling

Acta Geotechnica - Thermal spallation drilling is a contact-less means of borehole excavation that works by exposing a rock surface to a high-temperature jet flame. In this study, we investigate...     

Bathymetric patterns of deep-sea gastropod species diversity in 10 basins of the Atlantic Ocean and Norwegian Sea

Bathymetric patterns of macrofaunal species diversity are best documented in the western North Atlantic where diversity is a unimodal function of depth, peaking in the mid-bathyal zone and being depressed in the upper slope and abyss. There are few inter-basin studies of diversity-depth trends that are controlled for taxonomy, sampling gear, and diversity measures. In this paper, we compare gastropod diversity gradients in the North American Basin of the Atlantic to estimates of diversity in 9 other regions: the Norwegian Sea, West European Basin, Guiana Basin, Gambia Basin, Equatorial Mid-Atlantic, Brazil Basin, Angola Basin, Cape Basin and Argentine Basin. All samples were collected with epibenthic sleds, and diversity calculated by the Sanders-Hurlbert normalized expected number of species. While sampling in other regions is generally less complete than in the western North Atlantic, results indicate that a unimodal pattern is not universal. Diversity can increase, decrease or show no relationship with depth. The level of diversity also varies among basins relative to the western North Atlantic, being depressed in the Norwegian Sea, at bathyal depths in the eastern North Atlantic, and below an oxygen minimum zone in the Cape Basin, and generally elevated at tropical latitudes and in abyssal regions where food supply is high. Associations between gastropod diversity and the ecology and geology of basins suggest that productivity, oxygen concentration, hydrographic disturbance and evolutionary-historical processes may be implicated in shaping bathymetric diversity gradients, but specific causes are difficult to discern. Much more intensive sampling, analyses of other major taxa, and more detailed ecological data are necessary to understand deep-sea biogeography at within- and between-basin spatial scales.     

Organic biomarkers in the twilight zone—Time series and settling velocity sediment traps during MedFlux

The transfer of material through the twilight zone of the ocean is controlled by sinking particles that contain organic matter (OM) and mineral ballast. During the MedFlux field program in the northwestern Mediterranean Sea in 2003, sinking particulate matter was collected in time series (TS) and settling velocity (SV) traps and analyzed for amino acids, lipids, and pigments (along with ballast minerals) [Lee, C., Armstrong, R.A., Wakeham, S.G., Peterson, M.L., Miquel, J.C., Cochran, J.K., Fowler, S.W., Hirschberg, D., Beck, A. Xue, J., 2009b. Particulate matter fluxes in time series and settling velocity sediment traps in the northwestern Mediterranean Sea. Deep-Sea Research II, this volume [doi:10.1016/j.dsr2.2008.12.003]]. The goal was to identify how organic chemical compositions of sinking particles varied as a function of their in-situ settling velocity. The TS record was used to define the biogeochemical character and temporal pattern in flux during the period of SV trap deployment. Temporal variations in organic and mineral compositions are consistent with particle biogeochemistry being driven by the seasonal succession of phytoplankton. Spring diatom bloom conditions led to a high flux of rapidly sinking aggregates and zooplankton fecal matter; summer oligotrophy followed and was characterized by a higher proportion of slowly sinking phytoplankton cells. Bacterial degradation is particularly important during the low-flux summer period. Settling velocity traps show that a large proportion of particulate organic matter sinks at 200–500 m d⁻¹. Organic compositions of this fast-sinking material mirrors that of fecal pellets and aggregated material that sinks as the spring bloom terminates. More-slowly sinking OM bears a stronger signature of bacterial degradation than do the faster-sinking particles. The observation that compositions of SV-sorted fractions are different implies that the particle field is compositionally heterogeneous over a range of settling velocities. Thus physical and biological exchange between fast-sinking and slow-sinking particles as they pass down the water column must be incomplete.