Deep drilling at the Siljan Ring impact structure: oxygen-isotope geochemistry of granite

The Siljan Ring is a 362-Ma-old impact structure formed in 1700-Ma-old I-type granites. A 6.8-km-deep borehole provides a vertical profile through granites and isolated horizontal diabase sills. Fluid-inclusion thermometry, and oxygen-isotope compositions of vein quartz, granite, diabase, impact melt, and pseudotachylite, reveal a complex history of fluid activity in the Siljan Ring, much of which can be related to the meteorite impact. In granites from the deep borehole, ¹⁸O values of matrix quartz increase with depth from near 8.0 at the surface to 9.5 at 5760 m depth. In contrast, feldspar ¹⁸O values decrease with depth from near 10 at the surface to 7.1 at 5760 m, forming a pattern opposite to the one defined by quartz isotopic compositions. Values of ¹⁸O for surface granites outside the impact structure are distinct from those in near-surface samples from the deep borehole. In the deep borehole, feldspar coloration varies from brick-red at the surface to white at 5760 m, and the abundances of crack-healing calcite and other secondary minerals decrease over the same interval. Superimposed on the overall decrease in alteration intensity with depth are localized fracture zones at 4662, 5415, and 6044 m depth that contain altered granites, and which provided pathways for deep penetration of surface water. The antithetic variation of quartz and feldspar ¹⁸O values, which can be correlated with mineralogical evidence of alteration, provides evidence for interaction between rocks and impact-heated fluids (100–300° C) in the upper 2 km of the pluton. Penetration of water to depths below 2 km was restricted by a general decrease in impact-fracturing with depth, and by a 60-m-thick diabase sill at 1500 m depth that may have been an aquitard. At depths below 4 km in the pluton, where water/rock ratios were low, oxygen isotopic compositions preserve evidence for limited high-temperature (>500° C) exchange between alkali feldspar and fluids. The high-temperature exchange may have been a post-impact event involving impact-heated fluids, or a post-magmatic event.     

The ordovician and other post-rosslare series Rocks in Southeast Co. Wexford

Ordovician sediments at Tagoat and Rosslare Harbour are re-described and their relationship to the underlying Rosslare Series discussed. A brief outline of their petrology is given, but it is shown that the fauna is in need of revision before reliable correlations can be made. Similar rocks are recorded near Tomhaggard; amongst these, spotted mudstones imply Ordovician or later intrusions. Undeformec dykes intrusive into the Rosslare Series are believed to be representatives of this phase.     

Petrology of the Proterozoic Potato River Layered Intrusion, Northern Wisconsin, USA

The Potato River intrusion is a Keweenawan (1100 Ma) mafic plutonemplaced in Keweenawan volcanics and earlier Proterozoic metasedimentaryrocks along the southeastern flank of the Lake Superior syncline.It comprises the following lithostratigraphic zones: a thinto absent Border zone of altered olivine gabbro; a Lower zoneof olivine gabbro; a Picritic zone of picrite and troctolite;a Middle zone of olivine gabbro and leucogabbro; an Upper zoneof quartz leucogabbro and ferrogabbro; and a Roof zone of granophyricand granitic rocks. Fractional crystallization is evident fromcompositional changes in the rocks and cumulus minerals withstratigraphic height. Elements concentrated in the cumulus mineralsolivine and plagioclase (Mg, Fe²⁺, Al, Ca, Ni, Co, Cr, Sr) decreasewith height; elements concentrated in the trapped liquid (Na,K, La, Y, Zr, Nb, Rb, Ba) increase with height; and other elements(Ti, Fe³⁺, P, Ga, V, Sc, Cu, Zn) show complicated behavior relatedto the appearance of additional cumulus phases such as clinopyroxene,Fe-Ti oxides, and apatite. Lower zone rocks contain some sulfide,probably from sulfur derived from the country rock, and theUpper zone has sulfides probably precipitated from an immisciblesulfide liquid. The sulfide-bearing rocks have similaritiesto those of other intrusions, such as Bushveld, Stillwater,and Skaergaard. The picritic and troctolitic rocks of the Picritic zone indicatethat the intrusion was open to additional injections of maficmagma. Roof zone granophyric rocks are residual liquids intrudedalong the upper margin of the intrusion during regional tilting,but Roof zone granitic rocks are probably melted country rock.An attempt is made to estimate by reverse stratigraphic summationthe compositional path of the magma that solidified above thePicritic zone. The first compositions are highly aluminous,which suggests that the upper part of the intrusion has beenenriched in plagioclase by convection-aided crystal sorting.A complementary unit of mafic rocks is not exposed, but it couldbe present down dip. Some of the later compositions are similarto typical Keweenawan high-Al tholeiites. The magma did notundergo extreme iron enrichment, probably because of oxygenfugacity buffering.     

Reconstruction of palaeosalinity using carbon isotopes and benthic associations: a comparison

Carbon and oxygen isotopes were determined on 40 recrystallized shells of Late Jurassic bivalves from the Lusitanian Basin of Portugal. In contrast with the oxygen isotopes, which exhibited considerable diagenetic distortion, the carbon isotopes are thought to preserve a record of the salinity of the Jurassic marginal marine seas in which these bivalves lived. The reconstructed palaeosalinities range from 35%o (euhaline) to 5% (oligohaline). Comparing these values with the palaeosalinity reconstructed from a palaeoecological analysis of 17 stratigraphic levels within the basin, the independently derived values agree in most cases. Strongly differing values are explained as being due to biotic factors and to diagenetic distortion of the isotopic signal; they are less likely to be due to smallscale time-averaging or insufficient microstratigraphic sampling. On the whole, the carbon isotope analyses are thought to produce reasonable palaeosalinity values, although data from infaunal, originally aragonitic bivalves appear to be less reliable than those from epifaunal bivalves with a predominantly or exclusively calcitic shell. As diagenetic alteration of the carbon isotope signal is, however, unpredictable and biotic effects on the isotopic composition are insufficiently known, palaeosalinity reconstructions based on stable isotope data should be supported by palaeoecological data.     

Rock-weathering rates as functions of time

The scarcity of documented numerical relations between rock weathering and time has led to a common assumption that rates of weathering are linear. This assumption has been strengthened by studies that have calculated long-term average rates. However, little theoretical or empirical evidence exists to support linear rates for most chemical-weathering processes, with the exception of congruent dissolution processes. The few previous studies of rock-weathering rates that contain quantitative documentation of the relation between chemical weathering and time suggest that the rates of most weathering processes decrease with time. Recent studies of weathering rinds on basaltic and andesitic stones in glacial deposits in the western United States also clearly demonstrate that rock-weathering processes slow with time. Some weathering processes appear to conform to exponential functions of time, such as the square-root time function for hydration of volcanic glass, which conforms to the theoretical predictions of diffusion kinetics. However, weathering of mineralogically heterogeneous rocks involves complex physical and chemical processes that generally can be expressed only empirically, commonly by way of logarithmic time functions. Incongruent dissolution and other weathering processes produce residues, which are commonly used as measures of weathering. These residues appear to slow movement of water to unaltered material and impede chemical transport away from it. If weathering residues impede weathering processes then rates of weathering and rates of residue production are inversely proportional to some function of the residue thickness. This results in simple mathematical analogs for weathering that imply nonlinear time functions. The rate of weathering becomes constant only when an equilibrium thickness of the residue is reached. Because weathering residues are relatively stable chemically, and because physical removal of residues below the ground surface is slight, many weathering features require considerable time to reach constant rates of change. For weathering rinds on volcanic stones in the western United States, this time is at least 0.5 my.     

Metadolerite age relationships in the Dalradian of northwest Donegal,Ireland and their orogenic significance

The structural relationships of several intrusive sheets belonging to the extensive metadolerite suite of the Appin (lower) Dalradian rocks of the Creeslough area, northwest Donegal, Ireland have been examined. It is concluded that, relative to the regional chronology of deformation of the enclosing metasediments, sheet emplacement has occurred: pre-D2; syn-D2; between D2 and D3; and syn-D3. The height of activity came in the post-D2, pre-D3 interval and coincided with the peak of regional metamorphism in the area. These relationships in Donegal are compared with those of the pretectonic basic rocks of the southwest Highlands and models are discussed.     

Space-time interaction amongst clusters of mining induced seismicity

Elementary cluster analysis of induced seismicity in a South African gold mine has shown that there is a clear interaction amongst the clusters; and that the level of the interaction is a function of the distance. The clusering algorithm used is an adaptation of the single-link cluster analysis which considers both three-dimensional space and time. A high level of interaction between the clusters is demonstrated from the cross-correlation analysis of seismic activity rates and radiated energy. A distinct decrease in the value of correlation coefficients was detectable as distance increased. This was somewhat surprising, considering the simplicity of the technique used. Since no attempt is made to study the physical mechanisms of interaction, these results are very preliminary, but interesting from an observational point of view.