Natural analogues

Natural analogues, which are occurrences of materials or processes which are analogous to expected materials or processes in a waste repository, are used to clarify the ability of the geologic environment and engineered system to contain the waste. It is hoped that natural analogues can provide data and insight on processes which generally occur on temporal or geometric scales which are too large to be studied in laboratory or field experiments. Natural analogues have been described for the study of transport and migration of radionuclides through the backfill and host rock, and the stability of backfill, shaft seals, waste forms, and waste containers. Natural analogues have also been suggested as an aid in predicting overall repository performance.     

Experimental investigation and application of the equilibrium rutile + orthopyroxene = quartz + ilmenite

Equilibria in the Sirf (Silica-Ilmenite-Rutile-Ferrosilite) system: $${\text{SiO}}_{\text{2}} + ({\text{Mg,Fe}}){\text{TiO}}_{\text{3}} {\text{ + (Mg,Fe)SiO}}_{\text{3}} $$ have been calibrated in the range 800–1100° C and 12–26 kbar using a piston-cylinder apparatus to assess the potential of the equilibria for geobarometry in granulite facies assemblages that lack garnet. Thermodynamic calculations indicate that the two end-member equilibria involving quartz + geikielite = rutile + enstatite, and quartz + ilmenite = rutile + ferrosilite, are metastable. We therefore reversed equilibria over the compositional range Fs_40–70, using Ag₈₀Pd₂₀ capsules with \(f_{{\text{O}}_{\text{2}} } \) buffered at or near iron-wüstite. Ilmenite compositions coexisting with orthopyroxene are \(X_{{\text{MgTiO}}_{\text{3}} }^{{\text{Ilm}}} \) of 0.06 to 0.15 and \(X_{{\text{Fe}}_{\text{2}} {\text{O}}_{\text{3}} }^{{\text{Ilm}}} \) of 0.00 to 0.01, corresponding toK _D values of 13.3, 10.2, 9.0 and 8.0 (±0.5) at 800, 900, 1000 and 1100° C, respectively, whereK _D =(XMg/XFe)^Opx/(XMg/XFe)^Ilm. Pressures have been calculated using equilibria in the Sirf system for granulites from the Grenville Province of Ontario and for granulite facies xenoliths from central Mexico. Pressures are consistent with other well-calibrated geobarometers for orthopyroxeneilmenite pairs from two Mexican samples in which oxide textures appear to represent equilibrium. Geologically unreasonable pressures are obtained, however, where oxide textures are complex. Application of data from this study on the equilibrium distribution of iron and magnesium between ilmenite and orthopyroxene suggests that some ilmenite in deep crustal xenoliths is not equilibrated with coexisting pyroxene, while assemblages from exposed granulite terranes have reequilibrated during retrogression. The Sirf equilibria are sensitive to small changes in composition and may be used for determination of activity/composition (a/X) relations of orthopyroxene if an ilmenite model is specified. A symmetric regular solution model has been used for orthopyroxene in conjunction with activity models for ilmenite available from the literature to calculatea/X relations in orthopyroxene of intermediate composition. Data from this study indicate that FeSiO₃?MgSiO₃ orthopyroxene exhibits small, positive deviations from ideality over the range 800–1100°C.     

Fate and transport of pollutants through a municipal solid waste landfill leachate in Sri Lanka

This study focuses on the characterization of leachate generated from Gohagoda dumpsite in Kandy, Sri Lanka, assessment of its spatial and temporal variations, and identification of subsurface canals and perched water bodies in the wetland system affected by the leachate flow. Leachate samples were collected monthly throughout dry and rainy seasons from different points of the leachate drainage channel over a period of 1 year and they were tested for quality parameters: pH, temperature, electrical conductivity, total dissolved soils, alkalinity, hardness, total solids, volatile solids, total suspended solids, volatile suspended solids, biochemical oxygen demand (BOD₅), chemical oxygen demand, nitrate-nitrogen, nitrite-nitrogen, phosphates, ammonium-nitrogen, chloride, dissolved organic carbon, total organic carbon and heavy metals. Sequential soil extraction procedures were performed for the characterization of leachate-affected local soil. A geophysical survey using direct current resistivity technique was conducted at locations downstream of the dumpsite. Leachate characteristics indicated that the leachate is in the methanogenic phase and the results strongly suggest that the leachate may be polluting the river where the leachate is discharged directly. Leachate exceeds the allowable limits of Sri Lankan wastewater discharge standards for many of the parameters. Significant difference (P < 0.05) was observed for most of organic and inorganic parameters among all sampling locations. Many parameters showed a negative correlation with pH. The affected soils showed high heavy metal concentrations. Resistivity study confirmed a confined leachate flow at the near surface with few subsurface canals. However, no separate subsurface plume movement was observed. The results of this research can effectively be used for the establishment of an efficient and effective treatment method for the Gohagoda landfill leachate.     

Multicomponent reactive transport modeling of uranium bioremediation field experiments

A reaction network integrating abiotic and microbially mediated reactions has been developed to simulate biostimulation field experiments at a former Uranium Mill Tailings Remedial Action (UMTRA) site in Rifle, Colorado. The reaction network was calibrated using data from the 2002 field experiment, after which it was applied without additional calibration to field experiments performed in 2003 and 2007. The robustness of the model specification is significant in that (1) the 2003 biostimulation field experiment was performed with 3 times higher acetate concentrations than the previous biostimulation in the same field plot (i.e., the 2002 experiment), and (2) the 2007 field experiment was performed in a new unperturbed plot on the same site. The biogeochemical reactive transport simulations accounted for four terminal electron-accepting processes (TEAPs), two distinct functional microbial populations, two pools of bioavailable Fe(III) minerals (iron oxides and phyllosilicate iron), uranium aqueous and surface complexation, mineral precipitation and dissolution. The conceptual model for bioavailable iron reflects recent laboratory studies with sediments from the UMTRA site that demonstrated that the bulk (∼90%) of initial Fe(III) bioreduction is associated with phyllosilicate rather than oxide forms of iron. The uranium reaction network includes a U(VI) surface complexation model based on laboratory studies with Rifle site sediments and aqueous complexation reactions that include ternary complexes (e.g., calcium-uranyl-carbonate). The bioreduced U(IV), Fe(II), and sulfide components produced during the experiments are strongly associated with the solid phases and may play an important role in long-term uranium immobilization.     

Friction characteristics of Cd-rich carbonate films on calcite surfaces: implications for compositional differentiation at the nanometer scale

Lateral Force Microscopy (LFM) studies were carried out on cleaved calcite sections in contact with solutions supersaturated with respect to otavite (CdCO₃) or calcite-otavite solid solutions (SS) as a means to examine the potential for future application of LFM as a nanometer-scale mineral surface composition mapping technique. Layer-by-layer growth of surface films took place either by step advancement or by a surface nucleation and step advancement mechanisms. Friction vs. applied load data acquired on the films and the calcite substrate were successfully fitted to the Johnson Kendall Roberts (JKR) model for single asperity contacts. Following this model, friction differences between film and substrate at low loads were dictated by differences in adhesion, whereas at higher load they reflect differences in contact shear strength. In most experiments at fixed load, the film showed higher friction than the calcite surface, but the friction-load dependence for the different surfaces revealed that at low loads (0–40 nN), a calcian otavite film has lower friction than calcite; a result that is contrary to earlier LFM reports of the same system. Multilayer films of calcian-otavite displayed increasing friction with film thickness, consistent with the expectation that the film surface composition will become increasingly Cd-rich with increasing thickness. Both load- and thickness-dependence trends support the hypothesis that the contact shear strength correlates with the hydration enthalpy of the surface ions, thereby imparting friction sensitivity in the LFM to mineral-water interface composition.     

Interaction between lateral sorting in river bends and vertical sorting in dunes

Sediment is sorted in river bends under the influence of gravity that pulls the heavier grains downslope and secondary flow that drags the finer grains upslope. Furthermore, when dunes are present, sediment is also sorted vertically at the dune lee side. However, sorting functions are poorly defined, since the relation to transverse bed slope and the interaction between lateral and vertical sorting is not yet understood for lack of data under controlled conditions. The objective of this study is to describe lateral sorting as a function of transverse bed slope and to gain an understanding of the interaction between lateral and vertical sorting in river bends. To this end, experiments were conducted with a poorly sorted sediment mixture in a rotating annular flume in which secondary flow intensity can be controlled separately from the main flow velocity, and therefore transverse bed slope towards the inner bend and dune dimensions can be systematically varied. Sediment samples were taken along cross-sections at the surface of dune troughs and dune crests, and over the entire depth at the location of dune crests (bulk samples), which enabled comparison of the relative contribution of vertical sorting by dunes to lateral sorting by the transverse bed slope. The data show that lateral sorting is always the dominant sorting mechanism in bends, and bulk samples showed minor effects of vertical sorting by dunes as long as all grain-size fractions are mobile. An empirical bend sorting model was fitted that redistributes the available sediment fractions over the cross-section as a function of transverse bed slope. Comparison with field data showed that the model accurately reproduces spatially-averaged trends in sorting at the bend apex in single-thread channels. The bend sorting model therefore provides a better definition of bend sorting with conservation of mass by size fraction and adds to current understanding of bend sorting. The implication for numerical modelling is that bend sorting mechanisms can be modelled independently of dunes, allowing the application of the active layer concept.     

Analysis of aquifer vulnerability and water quality using SINTACS and geographic weighted regression

Aquifer vulnerability and water quality were assessed in the Central Valleys of Oaxaca (Mexico) using the SINTACS method, based on a geographic information system. SINTACS layers were prepared using data such as climate (rainfall and temperature), water table, hydraulic conductivity, geology, soil type and topographic model. Maps for water quality index (WQI), contamination index and pollution sources index (PSI) were also obtained by this work. Groundwater quality in the Central Valleys may be affected by two factors, those with an anthropogenic origin and those with natural origin. High vulnerability values are located in the valleys of the basin, where granular sediments are exposed. Low vulnerability values are distributed in the basin??s ranges, where metamorphic rocks are found. Given that many of the zones with the highest groundwater vulnerability values correspond to zones with the greatest PSI values, there is great risk of groundwater contamination for the area of study because external (indicated by PSI) and internal (indicated by SINTACS) factors that cause pollution can be frequently observed in the same place. Geographic weighted regression (GWR) is used to test the dependency between WQI as dependent variable and SINTACS, PSI, Urban localities, Agriculture, Pastures and Rivers as predictors. The results indicate the non-stationary behavior of the dependent variable with respect to the predictors. While the obtained GWR models used to model WQI cannot be used in practical situations to predict the behavior of said variable, they can be used to estimate the degree to which the predictors influence the variable of interest.     

Assessment to the potential mobility and toxicity of metals and metalloids in soils contaminated by old Sb–Au and As–Au mines (NW Portugal)

The main purpose of this study is to assess arsenic and antimony availability in soils, as well as Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn availability in soils derived from the schist–metagraywacke complex close to old Sb–Au mines and in soils developed from Ordovician slates and close to an old As–Au mine in Portugal. The availability was determined using a European certified sequential extraction procedure (BCR). The results demonstrated that metalloids are not readily bioavailable, because they are mainly associated with the residual fraction. Arsenic and antimony proportions in exchangeable fractions are up to 3 and 1%, respectively. However, arsenic is up to 24% in oxy-hydroxide fractions, while antimony is up to 4% in them, demonstrating the highest bioavailability of arsenic compared to that of antimony, as metalloids are weakly bound to the soils in that fraction. Therefore, arsenic tends to be more toxic than antimony in all soils studied. However, the pseudo-total contents show that both metalloids are above the Italian and Dutch guidelines. Therefore, if physico-chemical changes occur arsenic and antimony will show higher potential environmental risk than evidenced by Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn.     

Effects of an Omnivorous Katydid,Salinity, and Nutrients on a Planthopper-<Emphasis Type="Italic">Spartina</Emphasis> Food Web

Top–down and bottom–up effects interact to structure communities, especially in salt marshes, which contain strong gradients in bottom–up drivers such as salinity and nutrients. How omnivorous consumers respond to variation in prey availability and plant quality is poorly understood. We used a mesocosm experiment to examine how salinity, nutrients, an omnivore (the katydid Orchelimum fidicinium) and an herbivore (the planthopper Prokelisia spp.) interacted to structure a simplified salt marsh food web based on the marsh grass Spartina alterniflora. Bottom–up effects were strong, with both salinity and nutrients decreasing leaf C/N and increasing Prokelisia abundance. Top–down effects on plants were also strong, with both the herbivore and the omnivore affecting S. alterniflora traits and growth, especially when nutrients or salt were added. In contrast, top–down control by Orchelimum of Prokelisia was independent of bottom–up conditions. Orchelimum grew best on a diet containing both Spartina and Prokelisia, and in contrast to a sympatric omnivorous crab, did not shift to an animal-based diet when prey were present, suggesting that it is constrained to consume a mixed diet. These results suggest that the trophic effects of omnivores depend on omnivore behavior, dietary constraints, and ability to suppress lower trophic levels, and that omnivorous katydids may play a previously unrecognized role in salt marsh food webs.     

Correction: Hydraulic tomography analysis of municipal-well operation data with geology-based groundwater models

Hydrogeology Journal - A Correction to this paper has been published: https://doi.org/10.1007/s10040-021-02351-x