Origin of dacites of Taupo Volcanic Zone, New Zealand

Dacites form a relatively small proportion of lavas in the Taupo Volcanic Zone, New Zealand (5km³), and occur mainly on the eastern side. In this paper their origin is considered in terms of three processes: (a) partial melting of crustal rocks; (b) fractional crystallisation of basalt and andesite; and (c) sub-surface mixing of basic and acid magma. Modelling techniques are used to calculate the most acceptable degree of fractional crystallisation and magma mixing to fit major-element data, and these values are used to compare calculated and observed trace-element values. The success or failure of the model is determined by the closeness of the two sets of values. For partial-melt models, trace-element values alone are calculated by the batch-melting equation.Results indicate that White Island dacite can best be modelled by fractional crystallisation; Manawahe by fractional crystallisation plus limited crustal contamination; Maungaongaonga by partial melting of Western Basement greywacke, and Tauhara by partial melting of this greywacke together with minor mixing with a more basic magma. Results from Parekauau and Horohoro indicate that these lavas are unlikely to have formed by any of the processes examined.     

Chemical and isotopic investigation of warm springs associated with normal faults in Utah

Thermal springs associated with normal faults in Utah have been analyzed for major cations and anions, and oxygen and hydrogen isotopes. Springs with measured temperatures averaging greater than 40°C are characterized by Na + K- and SO₄ + Cl-rich waters containing 10³ to 10⁴ mg/l of dissolved solids. Lower temperature springs, averaging less than 40°C, are more enriched in Ca + Mg relative to Na + K. Chemical variations monitored through time in selected thermal springs are probably produced by mixing with non-thermal waters. During the summer months at times of maximum flow, selected hot springs exhibit their highest temperatures and maximum enrichments in most chemical constituents.Cation ratios and silica concentrations remain relatively constant through time for selected Utah thermal springs assuring the applicability of the geothermometer calculations regardless of the time of year. Geothermometer calculations utilizing either the quartz (no steam loss), chalcedony or Mg-corrected Na/K/Ca methods indicate that most thermal springs in Utah associated with normal faults have subsurface temperatures in the range of 25 to less than 120°C. This temperature range suggests fluid circulation is restricted to depths less than about three kilometers assuming an average thermal gradient of about 40°C/km.Thermodynamic calculations suggest that most thermal springs are oversaturated with respect to calcite, quartz, pyrophyllite, (Fe, Mg)-montmorillonite, microcline and hematite, and undersaturated with respect to anhydrite, gypsum, fluorite and anorthite. Chalcedony and cristobalite appear to be the only phases consistently at or near saturation in most waters. Theoretical evaluation of mixing on mineral saturation trends indicates that anhydrite and calcite become increasingly more undersaturated as cold, dilute groundwater mixes with a hot (150°C), NaCl-rich fluid. The evolution of these thermal waters issuing from faults appears to be one involving the dissolution of silicates such as feldspars and micas by CO₂-enriched groundwaters that become more reactive with increasing temperature and/or time. Solution compositions plotted on mineral equilibrium diagrams trend from product phases such as kaolinite or montmorillonite toward reactant phases dominated by alkali feldspars.Isotopic compositions indicate that these springs are of local surface origin, either meteoric (low TDS, < 5000 mg/l) or connate ground water (high TDS, > 5000 mg/l). Deviations from the meteoric water line are the result of rock-water isotopic exchange, mixing or evaporation. Fluid source regions and residence times of selected thermal spring systems (Red Hill, Thermo) have been evaluated through the use of a σ D-contour map of central and western Utah. Ages for waters in these areas range from about 13 years to over 500 years. These estimates are comparable to those made for low-temperature hydrothermal systems in Iceland.     

Spatially discontinuous modern sedimentation in Georgian Bay, Huron Basin, Great Lakes

High-resolution seismic reflection profile data show that the modern sediment cover (over the last 150 years) in Georgian Bay is thin and spatially discontinuous. Sediments rich in ragweed pollen, largely derived from siltation linked to land clearing and European settlement, form a thin, discontinuous veneer on the lakebed. Much of the lakebed consists of exposed sediments deposited during the late glacial or early postglacial. Accumulation rates of modern sediments range from < 0 mm/year (net erosion) to ∼3.2 mm/year, often within a few hundred metres spatially. These rates are much lower than those reported for the main basin of Lake Huron and the other Great Lakes, and are attributed to the low sediment supply. Only a few small rivers flow into Georgian Bay, and most of the basin is surrounded by bedrock of Precambrian gneiss and granite to the east, and Silurian dolostone, limestone and shale to the west. Thick deposits of Pleistocene drift, found on the Georgian Bay shoreline only between Meaford and Port Severn, are the main sediment source for the entire basin at present. Holocene to modern sediments are even absent from some deep basins of Georgian Bay. These findings have implications for the ultimate fate of anthropogenic contaminants in Georgian Bay. While microfossil assemblages in the ragweed-rich sediments record increased eutrophication over the last 150 years, most pollutants generated in the Georgian Bay catchment are not accumulating on the lakebed and are probably exported from the Bay.     

The numerical solution of the Advection-Dispersion Equation: A review of some basic principles

The simulation of solute transport in rivers is frequently based on numerical models of the Advection-Dispersion Equation. The construction of reliable computational schemes, however, is not necessarily easy. The paper reviews some of the most important issues in this regard, taking the finite volume method as the basis of the simulation, and compares the performance of several types of scheme for a simple case of the transport of a patch of solute along a uniform river. The results illustrate some typical (and well known) deficiencies of explicit schemes and compare the contrasting performance of implicit and semi-Lagrangian versions of the same schemes. It is concluded that the latter have several benefits over the other types of scheme.     

Evolution of the variability of surface temperature and vegetation density in the great plains

This study focuses on how the variability of land surface temperature and vegetation density at the SGP ARM-CART site changes over episodic (day to day) and seasonal time scales using AVHRR satellite data. Four drying periods throughout the year are analyzed. Land surface temperature had an erratic relationship with time exhibiting no deterministic pattern from day-to-day or season-to-season. Furthermore, it did not exhibit spatial pattern persistence. On the other hand, vegetation density had a consistent spatial pattern and temporal decay during average length drying periods (less than 7 days) as well as within a season. However, there were distinct differences in the seasonal pattern of variation between winter and growing seasons. In addition, the paper highlights a methodology to quantify the relationships that exist at the land surface between the primary parameter of interest and the controlling variables.     

Use of high spectral resolution remote sensing to determine leaf palatability of eucalypt trees for folivorous marsupials

In this study we assess the feasibility of remotely measuring canopy biochemistry, and thus the potential for conducting large-scale mapping of habitat quality. A number of studies have found nutrient composition of eucalypt foliage to be a major determinant of the distribution of folivorous marsupials. More recently it has been demonstrated that a specific group of secondary plant chemicals, the diformylphloroglucinols (DFPs), are the most important feeding deterrents, and are thus vital determinants of habitat quality. We report on the use of laboratory spectroscopy to attempt to identify one such DFP, sideroxylonal-A, in the foliage of Eucalyptus melliodora, one of the few eucalypt species browsed by folivorous marsupials. Reflectance spectra were obtained for freeze-dried, ground leaves using near infrared spectroscopy (NIRS) and for both oven-dried and fresh whole leaves using a laboratory-based (FieldSpec) spectroradiometer. Modified partial least squares (MPLS) regression was used to develop calibration equations for sideroxylonal-A concentration based on the reflectance spectra transformed as both the first and second difference of absorbance (Log 1/R). The predictive ability of the calibration equations was assessed using the standard error of calibration statistic (SECV). Coefficients of determination (r²) were highest for the ground leaf spectra (0.98), followed by the fresh leaf and dry leaf spectra (0.94 and 0.87, respectively). When applied to independent validation sub-sets, sideroxylonal-A was most accurately predicted from the ground leaf spectra (r² = 0.94), followed by the dry leaf and fresh leaf spectra (0.72 and 0.53, respectively). Two spectral regions, centred on 674 nm and 1394 nm, were found to be highly correlated with sideroxylonal-A concentration for each of the three spectral data sets studied. Results from this study suggest that calibration equations derived from modified partial least squares regression may be used to predict sideroxylonal-A concentration, and hence leaf palatability, of Eucalyptus melliodora trees, thereby indicating that the remote estimation of habitat quality of eucalypt forests for marsupial folivores is feasible.     

Petroleum Hydrocarbon Bioventing Kinetics Determined in Soil Core, Microcosm, and Tubing Cluster Studies

Aerobic biodegradation of vapor-phase petroleum hydrocarbons was evaluated in an intact soil core from the site of an aviation gasoline release. An unsaturated zone soil core was subjected to a flow of nitrogen gas, oxygen, water vapor, and vapor-phase hydrocarbons in a configuration analogous to a biofilter or an in situ bioventing or sparging situation. The vertical profiles of vapor-phase hydrocarbon concentration in the soil core were determined by gas chromatography of vapor samples. Biodegradation reduced low influent hydrocarbon concentrations by 45 to 92 percent over a 0.6-m interval of an intact soil core. The estimated total hydrocarbon concentration was reduced by 75 percent from 26 to 7 parts per million. Steady-state concentrations were input to a simple analytical model balancing advection and first-order biodegradation of hydrocarbons. First-order rate constants for the major hydrocarbon compounds were used to calibrate the model to the concentration profiles. Rate constants for the seven individual hydrocarbon compounds varied by a factor of 4. Compounds with lower molecular weights, fewer methyl groups, and no quaternary carbons tended to have higher rate constants. The first-order rate constants were consistent with kinetic parameters determined from both microcosm and tubing cluster studies at the field site.     

Post-collapse volcanic history of calderas on a composite volcano: an example from Roccamonfina,southern Italy

Roccamonfina, part of the Roman Potassic Volcanic Province, is an example of a composite volcano with a complex history of caldera development. The main caldera truncates a cone constructed predominantly of this caldera may have been associated with one of the ignimbritic eruptions of the Brown Leucitic Tuff (BLT) around 385 000 yr BP. The Campagnola Tuff, the youngest ignimbrite of the BLT, however, drapes the caldera margin and must postdate at least the initial stages of collapse. During the subsequent history of the caldera there were several major explosive eruptions. The largest of these was that of the Galluccio Tuff at about 300 000 yr BP. It is likely that there was further collapse within the main caldera associated with these eruptions. It is of note that despite these subsequent major explosive eruptions later collapse occurred within the confines of the main caldera. Between eruptions caldera lakes developed producing numerous lacustrine beds within the caldera fill. Extensive phases of phreatomagmatic activity generated thick sequences of pyroclastic surge and fall deposits. Activity within the main caldera ended with the growth of a large complex of basaltic trachyandestite lava domes around 150 000 yr BP. Early in the history of Roccamonfina sector collapse on the northern flank of the volcano formed the northern caldera. One of the youngest major events on Roccamonfina occurred at the head of this northern caldera with explosive activity producing the Conca Ignimbrite and associated caldera. There is no evidence that there was any linkage in the plumbing systems that fed eruptions in the main and northern calderas.