Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.     

Prediction of tension crack location and riverbank erosion hazards along destabilized channels

Riverbank erosion, associated sedimentation and land loss hazards are a land management problem of global significance and many attempts to predict the onset of riverbank instability have been made. Recently, Osman and Thorne (1988) have presented a Culmann-type analysis of the stability of steep, cohesive riverbanks; this has the potential to be a considerable improvement over previous bank stability theories, which do not account for bank geometry changes due to toe scour and lateral erosion. However, in this paper it is shown that the existing Osman-Thorne model does not properly incorporate the influence of tension cracking on bank stability since the location of the tension crack on the floodplain is indirectly determined via calculation or arbitrary specification of the tension crack depth. Furthermore, accurate determination of tension crack location is essential to the calculation of the geometry of riverbank failure blocks and hence prediction of land loss and bank sediment yield associated with riverbank instability and channel widening. In this paper, a rational, physically based method to predict the location of tension cracks on the floodplain behind the eroding bank face is presented and tested. A case study is used to illustrate the computational procedure required to apply the model. Improved estimates of failure block geometry using the new method may potentially be applied to improve predictions of bank retreat and floodplain land loss along river channels destabilized as a result of environmental change.     

Tide–surge interactions and their effects on total sea levels in Irish coastal waters

The research presented in this paper involves the application of the joint probability method to the estimation of extreme water levels resulting from astronomical tides and surge residuals and the investigation of the effects of tide–surge interactions on extreme water levels. The distribution of tide peaks was analysed from field records (<20 years) and a 46-year dataset of monthly maximum tidal amplitudes. Large surges were extracted from both field records and a numerical model hindcast covering the 48 largest storm events in the Irish Sea over the period 1959–2005. Extreme storm surges and tides were independently modelled using the generalised extreme value statistical model, and derived probability distributions were used to compute extreme water levels. An important, and novel, aspect of this research is an analysis of tide–surge interactions and their effects on total water level; where interactions exist, they lead to lower total water levels than in the case of independency. The degree of decrease varies with interaction strength, magnitude of surge peak at a particular phase of tide and the distribution of peaks over a tidal cycle. Therefore, including interactions in the computation of extreme levels may provide very useful information at the design stage of coastal protection systems.     

Fe, Ni and Co variations in the metals of some antarctic chondrites

Nearly 4,000 Fe, Ni and Co analyses have been carried out on the metal phases of 12 Antarctic chondritic meteorites by means of the electron microprobe. H-group chondrites show relatively simple patterns of variation for these elements but L- and LL-group members show much more scatter in both Ni and Co concentrations. A single member of the CO3 group investigated shows some scatter in the concentrations and also much higher Co concentrations in the high-Ni (awaruite?) phase (1.25–2%) than in the coexisting kamacite (0.2–0.5%). Thus, analysis of the metal phases can provide not only a means of identifying the group to which a meteorite belongs, but also the possibility of distinguishing between individual chondrites from the same group.

The overall concentrations of Co in the metal particles in the different groups are considered to be related inversely to the abundance of metal grains in meteorites of these groups while the scatter is interpreted as reflecting characteristics inherited at the time of accretion. The absence of homogenisation of the concentrations of Fe, Ni and Co in the metal particles, even in so-called equilibrated chondrites, provides further evidence against the widely held notion that these meteorites have been involved in a high-temperature prograde metamorphism.     

The physical volcanology of the 1600 eruption of Huaynaputina, southern Peru

Volcán Huaynaputina is a group of four vents located at 16°36'S, 70°51'W in southern Peru that produced one of the largest eruptions of historical times when ~11 km³ of magma was erupted during the period 19 February to 6 March 1600. The main eruptive vents are located at 4200 m within an erosion-modified amphitheater of a significantly older stratovolcano. The eruption proceeded in three stages. Stage I was an ~20-h sustained plinian eruption on 19-20 February that produced an extensive dacite pumice fall deposit (magma volume ~2.6 km³). Throughout medial-distal and distal parts of the dispersal area, a fine-grained plinian ashfall unit overlies the pumice fall deposit. This very widespread ash (magma volume ~6.2 km³) has been recognized in Antarctic ice cores. A short period of quiescence allowed local erosion of the uppermost stage-I deposits and was followed by renewed but intermittent explosive activity between 22 and 26 February (stage II). This activity resulted in intercalated pyroclastic flow and pumice fall deposits (~1 km³). The flow deposits are valley confined, whereas associated co-ignimbrite ash fall is found overlying the plinian ash deposit. Following another period of quiescence, vulcanian-type explosions of stage III commenced on 28 February and produced crudely bedded ash, lapilli, and bombs of dense dacite (~1 km³). Activity ceased on 6 March. Compositions erupted are predominantly high-K dacites with a phenocryst assemblage of plagioclase>hornblende>biotite>Fe-Ti oxides-apatite. Major elements are broadly similar in all three stages, but there are a few important differences. Stage-I pumice has less evolved glass compositions (~73% SiO₂), lower crystal contents (17-20%), lower density (1.0-1.3 g/cm³), and phase equilibria suggest higher temperature and volatile contents. Stage-II and stage-III juvenile clasts have more evolved glass (~76% SiO₂) compositions, higher crystal contents (25-35%), higher densities (up to 2.2 g/cm³), and lower temperature and volatile contents. All juvenile clasts show mineralogical evidence for thermal disequilibrium. Inflections on a plot of log thickness vs area^1/2 for the fall deposits suggest that the pumice fall and the plinian ash fall were dispersed under different conditions and may have been derived from different parts of the eruption column system. The ash appears to have been dispersed mainly from the uppermost parts of the umbrella cloud by upper-level winds, whereas the pumice fall may have been derived from the lower parts of the umbrella cloud and vertical part of the eruption column and transported by a lower-altitude wind field. Thickness half distances and clast half distances for the pumice fall deposit suggests a column neutral buoyancy height of 24-32 km and a total column height of 34-46 km. The estimated mass discharge rate for the ~20-h-long stage-I eruption is 2.4᎒⁸ kg/s and the volumetric discharge rate is ~3.6᎒⁵ m³/s. The pumice fall deposit has a dispersal index (Hildreth and Drake 1992) of 4.4, and its index of fragmentation is at least 89%, reflecting the dominant volume of fines produced. Of the 11 km³ total volume of dacite magma erupted in 1600, approximately 85% was evacuated during stage 1. The three main vents range in size from ~70 to ~400 m. Alignment of these vents and a late-stage dyke parallel to the NNW-SSE trend defined by older volcanics suggest that the eruption initiated along a fissure that developed along pre-existing weaknesses. During stage I this fissure evolved into a large flared vent, vent 2, with a diameter of approximately 400 m. This vent was active throughout stage II, at the end of which a dome was emplaced within it. During stage III this dome was eviscerated forming the youngest vent in the group, vent 3. A minor extra-amphitheater vent was produced during the final event of the eruptive sequence. Recharge may have induced magma to rise away from a deep zone of magma generation and storage. Subsequently, vesiculation in the rising magma batch, possibly enhanced by interaction with an ancient hydrothermal system, triggered and fueled the sustained Plinian eruption of stage I. A lower volatile content in the stage-II and stage-III magma led to transitional column behavior and pyroclastic flow generation in stage II. Continued magma uprise led to emplacement of a dome which was subsequently destroyed during stage III. No caldera collapse occurred because no shallow magma chamber developed beneath this volcano.     

Pilot study experiments sourcing quartzite,Gunnison Basin,Colorado

This paper reports the results of pilot‐study efforts to develop methods to profile quartzite, a rock type to which geochemical and other sourcing techniques have only rarely been applied. The long‐term goal of the research is to fingerprint sources of quartzite in the Gunnison Basin, southwest Colorado, used by Paleoindian people ca. 11,500–8,000 years ago to make stone tools. Success would facilitate reconstruction of Paleoindian mobility in the Southern Rocky Mountains and potentially anywhere prehistoric people used quartzite. The goals of this paper are more modest: to demonstrate that a small‐scale exploration of sourcing techniques suggests reason for optimism that quartzites may be amenable to source discrimination. For the same twenty Gunnison Basin quartzite samples, this study evaluated petrography, ultraviolet fluorescence (UVF), wavelength dispersive X‐ray fluorescence (WD‐XRF), instrumental neutron activation analysis (INAA), and inductively coupled plasma mass spectrometry—both acid‐digestion (AD‐ICP‐MS) and laser ablation (LA‐ICP‐MS)—as means to differentiate among the specimens and the sources they represent. Although more testing is needed to verify and refine our results, the study suggests there is potential for petrography, INAA, and both versions of ICP‐MS to discriminate among quartzites from different source localities in the Gunnison Basin. The greatest potential for discriminating among different sources of quartzite in the Gunnison Basin may lie in a methodology combining petrographic analysis and LA‐ICPMS. Future testing is required to evaluate this two‐fold approach. © 2008 Wiley Periodicals, Inc.     

Open-system chemical behavior in deep Wilcox Group mudstones,Texas Gulf Coast,USA

Wilcox Group mudstones have been mechanically and geochemically transformed over a temperature range of 20–200 °C. Our research controlled for provenance and age by sampling from five wells, parallel to the paleodepositional axis, all within the Houston delta system. Across the sampled depths, mudstone porosity has been reduced from ∼25 to <10% and bulk mineralogical change as documented by quantitative X-ray diffraction includes decreases in quartz, K-feldspar and kaolinite content whereas illite + illite − smectite, chlorite, and plagioclase increase. These mineral transformations transfer elements at a scale of less than 1 mm from one mineralogical form to another, however, X-ray fluorescence data suggest that among major elements only Al₂O₃ and TiO₂ are fully conserved within the system (trace-element ZrO₂ is also conserved). K₂O has been added to and SiO₂ released from the Wilcox Group mudstones. Cathodoluminescence and secondary electron imaging did not find this SiO₂ locally precipitated. We, therefore, document an open-system geochemical behavior.     

A pleistocene mummified ostracod from the Wairarapa district

A mummified specimen of Scottia insularis Chapman is recorded from beds of Upper Nukumaruan age (Pleistocene) at Gladstone in the Wairarapa Valley. This is the first record of a mummified species from New Zealand.     

Evidence from heterologous expression of glutathione S-transferases A and A1 of the plaice (Pleuronectes platessa) that their endogenous role is in detoxification of lipid peroxidation products

cDNA clones for glutathione S-transferases A (GST-A) and A1 (GST-A1) from plaice (Pleuronectes platessa) were expressed as N-terminally 6XHis tagged proteins in Escherichia coli and purified to homogeneity from Ni-NTA silica. GST-A was an efficient catalyst for conjugation of unsaturated alkenals derived from peroxidation of polyunsaturated fatty acids with the highest activity observed with trans-non-2-enal (8 micromol min(-1) mg(-1)). GST-A1 was a very efficient Se-independent glutathione peroxidase with an activity towards cumene hydroperoxide of 25 micromol min(-1) mg(-1). Although the enzymes exhibited moderately high activities towards the model substrate 1-chloro-2,4-dinitrobenzene (CDNB) they exhibited little or no activity towards other common prototypical xenobiotic substrates. Together with data for ontogeny, tissue distribution and inducibility of these enzymes, we contend that a primary function of these enzymes is protection from the harmful effects of lipid peroxidation products generated naturally or exacerbated by xenobiotic exposure.