A methodology for historical assessment of compliance with environmental water allocations: lessons from the Crocodile (East) River,South Africa

Abstract

Environmental flow provisions are a legal obligation under South Africa’s National Water Act (1998) where they are known as the “ecological reserve”, which is now being realized in river operations. This article presents a semi-quantitative method, based on flow–duration curve (FDC) analysis, used to assess the compliance of the Crocodile (East) River with the reserve in an historical context. Using both monthly and daily average flow data, we determine the extent and magnitude of non-compliant flows against environmental water requirements (EWRs) for three periods (1960–1983, 1983–2000, and 2000–2010). The results suggest a high degree of non-compliance, with the reserve increasing with each of these periods (14%, 35%, and 39% of the time), respectively, where effects were most pronounced in the low-flow season. The results also suggest that, whilst the magnitudes of reserve infringements for the latter period are relatively high, there appears to have been some improvement since the implementation of the river’s operating rules.

Editor Z.W. Kundzewicz; Guest editor M. Acreman

Citation Riddell, E., Pollard, S., Mallory, S., and Sawunyama, T., 2014. A methodology for historical assessment of compliance with environmental water allocations: lessons from the Crocodile (East) River, South Africa. Hydrological Sciences Journal, 59 (3–4), 831–843.     

Shear zones within the Bloody Bluff fault zone: Analysis and tectonic implications

The Bloody Bluff fault zone, which divides the New England Avalon zone and Nashoba zone, contains at least two shear zones that are within Avalonian rocks. The Rice Road shear zone (sinistral, strike-slip) affects the Westboro Formation and is intruded by the 630 Ma Dedham Granite. The Rice Road shear zone, and equivalent pre-granite mylonites appearing in drill cores, parallel the terrane boundary, and may have controlled the later mylonitization. The Nobscot shear zone (dextral, strike-slip) is a prograde shear zone cutting a granite assumed to be related to the surrounding 630 Ma plutons. Similar shear zones have been seen cutting Late Proterozoic plutons in the New England Avalon zone, and represent a series of en echelon strike-slip shears. The Burlington mylonite zone (shear sense equivocal) is part of the terrane boundary. This is a retrograde shear zone that forms the southeastern border of the Wolfpen lens, a lenticular body of sheared and altered metamorphic and intrusive rock that has been assumed to be part of the New England Avalon zone. Microstructural characteristics indicate that the Burlington mylonite zone was active after the Nobscot shear zone. In particular, quartz in the Nobscot shear zone was dynamically recrystallized by a combination of grain boundary migration and rotation recrystallization processes, thought to occur during shearing at upper-greenschist conditions. In contrast, quartz in the Burlington mylonite zone was recrystallized predominantly by rotation recrystallization, indicating lower-greenschist, retrograde, deformation. The two shear zones are too close for these differences to be a result of a simple thermal field gradient.While mineral assemblages in most of the study area indicate no metamorphic grade higher than upper-greenschist temperatures, the Wolfpen lens contains amphibolites with assemblages formed at temperatures above the oligoclase isograd, indicating mid-amphibolite facies metamorphism. As metamorphic contrast is one of the key features differentiating the Nashoba zone from the New England Avalon zone, the Wolfpen lens cannot be assumed to be part of Avalon. It may be a small block of rocks of intermediate grade between the two terranes.     

Climate change triggered sedimentation and progressive tectonic uplift in a coupled piedmont–axial system: Cuyama Valley,California, USA

Channels on the north‐facing piedmont of the Sierra Madre range in Cuyama Valley, California have alternated between three process regimes during the late Quaternary: (1) vertical incision into piedmont alluvium and older sedimentary deposits; (2) lateral erosion; and (3) sediment accumulation. The state of the piedmont system at a given time has been controlled by upstream sediment flux, regional tectonic uplift and incision of the axial Cuyama River. To better understand the timing and to attempt to interpret causes of past geomorphological processes on the Sierra Madre piedmont, we mapped the surficial geology and dated alluvial deposits using radiocarbon, cosmogenic and optical dating methods. Four primary episodes of sedimentation have occurred since ca. 100 ka, culminating in the most recent period of extensive piedmont sedimentation between 30 and 20 ka. Fill terraces in Cuyama Valley formed by piedmont sediment accumulation followed by vertical incision and lateral erosion are fairly planar and often mantle strath bedrock surfaces. Their vertical spatial arrangement is a record of progressive regional tectonic uplift and concomitant axial Cuyama River channel incision migrating up tributary piedmont channels. Subparallel longitudinal terrace profiles which have a linear age–elevation relationship indicate that multiple episodes of climatically controlled sedimentation overprints ～1 m kyr^?1 of regional uplift affecting the Cuyama River and its tributaries. Sedimentation was probably a result of increased precipitation that caused saturation landsliding in steep catchments. It is possible that increased precipitation during the Last Glacial Maximum was caused by both continental‐scale circulation pattern reorganization and increased Pacific storm frequency and intensity caused by ‘early warming’ of nearby Pacific Ocean surface waters. Older episodes of piedmont sedimentation are difficult to correlate with specific climate regimes, but may correlate with previous periods of increased precipitation. Copyright © 2007 John Wiley & Sons, Ltd.     

Geology and K-Ar dating of the Tuxtla Volcanic Field,Veracruz, Mexico

The Tuxtla Volcanic Field (TVF) is located on the coast of the Gulf of Mexico in the southern part of the state of Veracruz, Mexico. Volcanism began about 7 my ago, in the Late Miocene, and continued to recent times with historical eruptions in ad 1664 and 1793. The oldest rocks occur as highly eroded remnants of lava flows in the area surrounding the historically active cone of San Martín Tuxtla. Between about 3 and 1 my ago, four large composite volcanoes were built in the eastern part of the area. Rocks from these structures are hydrothermally altered and covered with lateritic soils, and their northern slopes show extensive erosional dissection that has widened preexisting craters to form erosional calderas. The eastern volcanoes are composed of alkali basalts, hawaiites, mugearites, and benmoreites, with less common calc-alkaline basaltic andesites and andesites. In the western part of the area, San Martín Tuxtla Volcano and its over 250 satellite cinder cones and maars produced about 120 km³ of lava over the last 0.8 my. A ridge of flank cinder cones blocked drainage to the north to form Laguna Catemaco. Lavas erupted from San Martín and its flank vents are restricted to compositions between basanite and alkali basalt. The alignment of major volcanoes and flank vents along a N55°W trend suggests an extensional stress field in the crust with a minimum compressional stress orientation of N35° E. In total, about 800 km³ of lava has been erupted in the TVF in the last 7 my. This gives a magma output rate of about 0.1 km³/1000 year, a value smaller than most composite cones, but similar to cinder cone fields that occur in central Mexico. Individual eruptions over the last 5000 years had volumes on the order of 0.1km³, with average recurrence intervals of 600 years. The alkaline compositions of the TVF lavas contrast markedly with the calc-alkaline compositions erupted in the subduction-related Mexican Volcanic Belt to the west, leading previous workers to suggest that the TVF is not related to subduction. Trace-element signatures of TVF lavas indicate, however, that they are probably related to subduction. We suggest that the alkaline character of the TVF lavas is the result of low degrees of melting of a mantle source coupled with a stress regime that allows these small-volume melts to reach the surface in the TVF.     

A rapid screening-level method to optimize location of infiltration ponds

A rapid-screening technique was developed to identify lithologies that best disperse artificial recharge via surface infiltration and minimize effects on ground water chemistry. The technique prospectively evaluates basin infiltration rates and water chemistry influences by integrating geotechnical, hydraulic, and water quality data with column test data and numerical modeling. The technique was validated using field data collected from surface infiltration basins designed to recharge ground water pumped from the Pipeline pit gold mine in Nevada. Observed recharge rates at these infiltration sites correlated most significantly with depth to groundwater, with basins in coarse-grained lithologies performing better (0.45 to 0.85 m/day) than those with fine-grained layers (< 0.30 m/day). Observed water quality resulting from leaching of the previously unsaturated vadose zone showed a transitory (< six months) increase in solute concentrations followed by a decrease to baseline conditions, a phenomenon also observed in column tests that leached native soils with local ground water. Leaching of fine-grained soils with evaporites resulted in greater solute concentrations (TDS > 2000 mg/L) than coarse-grained soils (< 1200 mg/L). The results of HYDRUS_2D simulations using the accumulated data as input were in agreement with observed ground water chemistry downgradient of the infiltration basins for a variety of lithologies. Sites for infiltration basins can be rapidly screened to include areas with greatest depth to groundwater and in coarsest alluvial sediments, and impact to ground water chemistry can be reliably predicted using computer modeling and column test results.     

Calibration of a hysteretic model for glass fiber reinforced gypsum wall panels

Glass fi ber reinforced gypsum(GFRG) wall panels are prefabricated panels with hollow cores, originally developed in Australia and subsequently adopted by India and China for use in buildings. This paper discusses identifi cation and calibration of a suitable hysteretic model for GFRG wall panels fi lled with reinforced concrete. As considerable pinching was observed in the experimental results, a suitable hysteretic model with pinched hysteretic rule is used to conduct a series of quasi-static as inelastic hysteretic response analyses of GFRG panels with two different widths. The calibration of the pinching model parameters was carried out to approximately match the simulated and experimental responses up to 80% of the peak load in the post peak region. Interestingly, the same values of various parameters(energy dissipation and pinching related parameters) were obtained for all fi ve test specimens.     

Reappraising the geomorphology‐ecology link

This thematic Virtual Special Issue highlights a personal selection of 18 recent (2007–2009) contributions to Earth Surface Processes and Landforms. These papers provide a flavour of recent research that is concerned with furthering our understanding of the many ways in which the biosphere interacts with the physical and chemical processes of sediment transfer/transformation. Much of this research has focused on understanding the mechanics by which the biota can modulate sediment transport and the strength of earth surface materials, often with the aim of applying that knowledge to enhance bioremediation methods of erosion control. This work continues to be fundamentally important in enhancing our understanding of earth surface processes, but often treats the biosphere and physical world as uncoupled entities. This selection therefore also provides samples of work that point to an ongoing but significant disciplinary reappraisal in which it is the interactions between ecological and geomorphological realms that are of primary interest. Copyright © 2009 John Wiley & Sons, Ltd.     

Lagrangian and Eulerian estimates of circulation in the lee of Kapiti Island,New Zealand

Lagrangian drifters, moored acoustic Doppler current meters and hydrographic observations are combined with wind observations to describe the mean and variable nature of flow around Kapiti Island, New Zealand. Thirteen day-long deployments of up to six Lagrangian drifters show the mean flow is to the southwest, with evidence of stronger flows in the channel separating the island from the mainland, and an island wake in the lee of the island. Vortices in this island wake may be tidally driven. Scaling considerations suggest the flow is strong enough that tidal-generated vortices are shed on each tidal cycle. Both the drifters and mooring data suggest that the d’Urville Current around Kapiti Island has a significant wind-driven component. During north-westerlies, the drifters tend to hug the coast, and south-eastwards flows in the Rauoterangi Channel are accelerated. We suggest the observed correlation is the local expression of a South Taranaki basin scale response to the winds.     

Hormone loads exported by a tile‐drained agroecosystem receiving animal wastes

Little is known regarding hormone export from tile‐drained agricultural fields despite the widespread presence of tile drains in the Midwestern United States. By intensively measuring water flow rates and hormone concentrations in four subsurface tile drains and three receiving ditches at a working Midwest farm, hormone fluxes and loads from the tile‐drained fields were quantified. Before and during the 17‐month study period (January 2009 – May 2010), the associated farm fields received various animal waste applications (beef, dairy, poultry, sheep, and swine). Hormones monitored included the estrogens17β‐ and 17α‐estradiol, estrone, and estriol; the natural androgens testosterone, and androstenedione; and the synthetic androgens 17β‐ and 17α‐trenbolone, and trendione. Hormone loads measured in the ditches for three drainage areas during the entire 17‐month study period were in ranges of 16–58 mg/ha for total estrogens, 6.8–19 mg/ha for natural androgens, and 4.2–44 mg/ha for synthetic androgens. Because higher hormone concentrations generally occurred during discrete periods of increased flow, high flow rates often were associated with a disproportionately high hormone flux. For example, 80% of total estrogens and natural androgens exported into the ditches occurred during only 9–26% of the study period, coinciding with the most significant storm events. In addition, hormone fluxes were highest during storm events that occurred shortly after animal waste applications. Therefore, to effectively reduce hormone loads exported to downstream aquatic ecosystems in the absence of any application reduction, the short periods during which high‐flow events occur must be targeted. Copyright © 2012 John Wiley & Sons, Ltd.