Subglacial emplacement of tills and meltwater deposits at the base of overdeepened bedrock troughs

The sedimentary infills of subglacially eroded bedrock troughs in the Alps are underexplored archives for the timing, extent and character of Pleistocene glaciations but may contain excellent records of the Quaternary landscape evolution over several glacial–interglacial cycles. The onset of sedimentation in these bedrock troughs is often reflected by diamicts and gravels directly overlying bedrock in the deepest basin segments. Subglacial or proglacial depositional environments have been proposed for these coarse‐grained basal units but their characteristics and origin remain controversial. This article presents results from drill cores that recovered a coarse‐grained basal unit in a major buried bedrock‐trough system in the Lower Glatt Valley, northern Switzerland. The excellent core recovery allowed a detailed study combining macroscopic, microscopic and geochemical methods and gives unprecedented insights into the transition from erosion to deposition in overdeepened bedrock troughs. These results show that the basal infill comprises diamicts, interpreted as subglacial tills, separated by thin sorted interbeds, originating from subglacial cavity deposition. The stacking of these units is interpreted to represent repeated switching between a coupled and decoupled ice–bed‐interface indicating an ever‐transforming mosaic of subglacial bed conditions. Decoupling in response to high basal water pressures is probably promoted by the confined subglacial hydraulic conditions resulting from the bedrock acting as aquitards, the narrow reverse sloping outlet and a large catchment area. While stratigraphic and lithological evidence suggests that erosion and the onset of basal sedimentation occurred during the same glaciation, different scenarios for the relative timing of infilling in relation to formation and glaciation of the bedrock trough are discussed. Overlying deltaic and glaciolacustrine sediments suggest deposition during subsequent deglaciation of the bedrock trough. The basal sediment characteristics are in agreement with previous reports in hydrogeological and seismic exploration and suggest the occurrence of similar basal successions in other subglacially overdeepened basins in the Alps and elsewhere.     

The influence of Cr on the garnet–spinel transition in the Earth''s mantle: experiments in the system MgO–Cr2O3–SiO2 and thermodynamic modelling

The position of the transition from spinel peridotite to garnet peridotite in a simplified chemical composition has been determined experimentally at high pressures and high temperatures. The univariant reaction MgCr₂O₄+2Mg₂Si₂O₆=Mg₃Cr₂Si₃O₁₂+Mg₂SiO₄, has a negative slope in P–T space between 1200 °C and 1600 °C. The experimental results, combined with assessed thermodynamic data for MgCr₂O₄, MgSiO₃ and Mg₂SiO₄ give the entropy and enthalpy of formation of knorringite garnet (Mg₃Cr₂Si₃O₁₂). Thermodynamic calculations in simplified chemical compositions indicate that Cr shifts the garnet-in reaction to much higher pressures than previously anticipated. Moreover, in Cr-bearing systems a pressure–temperature field exists where garnet and spinel coexist. The width of this divariant field strongly depends on the Cr/(Cr+Al) of the system.     

Genesis and distribution of mineral waters as a consequence of recent lithospheric dynamics: the Rhenish Massif,Central Europe

Three major, interdependent processes control the genesis and distribution of mineral and thermal waters in the Rhenish Massif, Central Europe: (a) Magmatic processes in the upper mantle provide most of the CO₂ to produce bicarbonate waters in shallow aquifers. (b) Extension of the brittle upper crust enables the ascent of sodium chloride waters. (c) Uplift and erosion shape the massif's relief, which determines the extent of flow systems and the distribution of thermal springs. The chemistry of mineral waters further depends on the aquifers' mineral composition. A comprehensive set of hydrological, chemical, tectonic and geophysical data on the Rhenish Massif has been compiled. It was used to classify the mineral waters and to map the spatial distribution of water properties. The composition of cuttings from several representative wells producing different water types shows that the hydrothermal alteration of the aquifer rocks consists mainly of kaolinization of chlorite and dissolution of feldspar. Numerical transport simulations favour two modes of groundwater flow: topography-driven flow and the pressure-driven ascent of basement brines along active faults. Thermal convection is less important.     

Molecular and isotopic partitioning of low-molecular-weight hydrocarbons during migration and gas hydrate precipitation in deposits of a high-flux seepage site

Detailed knowledge of the extent of post-genetic modifications affecting shallow submarine hydrocarbons fueled from the deep subsurface is fundamental for evaluating source and reservoir properties. We investigated gases from a submarine high-flux seepage site in the anoxic Eastern Black Sea in order to elucidate molecular and isotopic alterations of low-molecular-weight hydrocarbons (LMWHC) associated with upward migration through the sediment and precipitation of shallow gas hydrates. For this, near-surface sediment pressure cores and free gas venting from the seafloor were collected using autoclave technology at the Batumi seep area at 845 m water depth within the gas hydrate stability zone.Vent gas, gas from pressure core degassing, and from hydrate dissociation were strongly dominated by methane (> 99.85 mol.% of ∑[C₁–C₄, CO₂]). Molecular ratios of LMWHC (C₁/[C₂ + C₃] > 1000) and stable isotopic compositions of methane (δ¹³C = ? 53.5‰ V-PDB; D/H around ? 175‰ SMOW) indicated predominant microbial methane formation. C₁/C₂₊ ratios and stable isotopic compositions of LMWHC distinguished three gas types prevailing in the seepage area. Vent gas discharged into bottom waters was depleted in methane by > 0.03 mol.% (∑[C₁–C₄, CO₂]) relative to the other gas types and the virtual lack of ¹⁴C–CH₄ indicated a negligible input of methane from degradation of fresh organic matter. Of all gas types analyzed, vent gas was least affected by molecular fractionation, thus, its origin from the deep subsurface rather than from decomposing hydrates in near-surface sediments is likely.As a result of the anaerobic oxidation of methane, LMWHC in pressure cores in top sediments included smaller methane fractions [0.03 mol.% ∑(C₁–C₄, CO₂)] than gas released from pressure cores of more deeply buried sediments, where the fraction of methane was maximal due to its preferential incorporation in hydrate lattices. No indications for stable carbon isotopic fractionations of methane during hydrate crystallization from vent gas were found. Enrichments of ¹⁴C–CH₄ (1.4 pMC) in short cores relative to lower abundances (max. 0.6 pMC) in gas from long cores and gas hydrates substantiates recent methanogenesis utilizing modern organic matter deposited in top sediments of this high-flux hydrocarbon seep area.     

Detailed observational study of a weak Echo region

High resolution 3-cm weather radar was used to observe the three dimensional structure of a weak echo region of a severe convective storm in northern Minnesota, U.S.A. Observations show that a seemingly steady-state updraft in the lower portion of the storm broke into an unsteady structure in the upper levels. This is interpreted as indicating that precipitation loading gradually decelerated the upper reaches of the updraft, resulting in periodic breakout of a new updraft core on the inflow side. This periodic behavior of the updraft may be related to hailstreaks and what has been termed the multi-celled storm.     

Exploring the spatially varying innovation capacity of the US counties in the framework of Griliches’ knowledge production function: a mixed GWR approach

Griliches’ knowledge production function has been increasingly adopted at the regional level where location-specific conditions drive the spatial differences in knowledge creation dynamics. However, the large majority of such studies rely on a traditional regression approach that assumes spatially homogenous marginal effects of knowledge input factors. This paper extends the authors’ previous work (Kang and Dall’erba in Int Reg Sci Rev, 2015. doi: 10.1177/0160017615572888) to investigate the spatial heterogeneity in the marginal effects by using nonparametric local modeling approaches such as geographically weighted regression (GWR) and mixed GWR with two distinct samples of the US Metropolitan Statistical Area (MSA) and non-MSA counties. The results indicate a high degree of spatial heterogeneity in the marginal effects of the knowledge input variables, more specifically for the local and distant spillovers of private knowledge measured across MSA counties. On the other hand, local academic knowledge spillovers are found to display spatially homogenous elasticities in both MSA and non-MSA counties. Our results highlight the strengths and weaknesses of each county’s innovation capacity and suggest policy implications for regional innovation strategies.     

Deep‐water dunes on drowned isolated carbonate terraces (Mozambique Channel,south‐west Indian Ocean)

Subaqueous sand dunes are common bedforms on continental shelves dominated by tidal and geostrophic currents. However, much less is known about sand dunes in deep‐marine settings that are affected by strong bottom currents. In this study, dune fields were identified on drowned isolated carbonate platforms in the Mozambique Channel (south‐west Indian Ocean). The acquired data include multibeam bathymetry, multi‐channel high‐resolution seismic reflection data, sea floor imagery, a sediment sample and current measurements from a moored current meter and hull‐mounted acoustic Doppler current profiler. The dunes are located at water depths ranging from 200 to 600 m on the slope terraces of a modern atoll (Bassas da India Atoll) and within small depressions formed during tectonic deformation of drowned carbonate platforms (Sakalaves Seamount and Jaguar Bank). Dunes are composed of bioclastic medium size sand, and are large to very large, with wavelengths of 40 to 350 m and heights of 0·9 to 9·0 m. Dune migration seems to be unidirectional in each dune field, suggesting a continuous import and export of bioclastic sand, with little sand being recycled. Oceanic currents are very intense in the Mozambique Channel and may be able to erode submerged carbonates, generating carbonate sand at great depths. A mooring located at 463 m water depth on the Hall Bank (30 km west of the Jaguar Bank) showed vigorous bottom currents, with mean speeds of 14 cm sec^?1 and maximum speeds of 57 cm sec^?1, compatible with sand dune formation. The intensity of currents is highly variable and is related to tidal processes (high‐frequency variability) and to anticyclonic eddies near the seamounts (low‐frequency variability). This study contributes to a better understanding of the formation of dunes in deep‐marine settings and provides valuable information about carbonate preservation after drowning, and the impact of bottom currents on sediment distribution and sea floor morphology.     

An experimental study of illite dissolution kinetics as a function of ph from 1.4 to 12.4 and temperature from 5 to 50°C

Dissolution rates of natural illite (Illite du Puy) were measured from Si release rates during closed system experiments at pH ranging from 1.4 to 12.4 and temperatures ranging from 5 to 50°C. Experiments performed at 4<pH<11 exhibited reactive fluid Si/Al concentration ratios that were inconsistent with stoichiometric illite dissolution likely due to secondary phase precipitation. In contrast, after an initial preferential release of aluminum relative to silicon, the reactive fluid Si/Al concentration ratio evolution was consistent with stoichiometric illite dissolution for all experiments conducted at 4>pH>11. Si release rate decreased with time during all experiments; for those experiments performed at 4>pH>11 this observation can be attributed to either 1) changing reactive surface area; 2) the effect of initial fine particle dissolution; or 3) a negative order of the illite dissolution reaction with respect to aqueous Al and/or Si. Measured dissolution rates exhibited a typical variation with pH; rates decrease with increasing pH at acid conditions, minimize at near to neutral pH and increase with increasing pH at basic conditions. An empirical expression describing rates obtained in the present study is given by