Blind prediction of in-plane and out-of-plane responses for a thin singly reinforced concrete flanged wall specimen

This paper describes the blind prediction carried out to simulate the response of a thin reinforced concrete wall tested under uni-directional (in-plane) quasi-static reverse cyclic loading. The specimen was a singly reinforced T-shaped wall panel with a shear-span ratio of 3.7. The response of the test specimen was simulated prior to the release of test results using a finite element model which had already been verified for its capabilities in capturing different failure patterns of rectangular walls, particularly out-of-plane instability. The numerical model predicted a flexural dominated response for the specimen accompanied by considerable out-of-plane deformations. The blind prediction report, submitted in advance to the principal investigator of the experimental campaign, included lateral load-top displacement response of the specimen, maximum out-of-plane deformation corresponding to each drift level, evolution of out-of-plane displacements throughout in-plane loading, response of the longitudinal reinforcement at the section exhibiting the maximum out-of-plane deformation, and von Mises as well as reinforcement stress distribution at some key points of the wall response. Furthermore, a parametric study was carried out addressing the effects of shear-span ratio, reinforcement eccentricity and axial load ratio on the wall response. Results of the numerical simulation that had been included in the blind prediction report have been compared with the experimental measurements indicating that the evolution of the out-of-plane deformation was well captured by the model.     

A revisitation of TRIX for trophic status assessment in the light of the European Water Framework Directive: application to Italian coastal waters

The trophic status classification of coastal waters at the European scale requires the availability of harmonised indicators and procedures. The composite trophic status index (TRIX) provides useful metrics for the assessment of the trophic status of coastal waters. It was originally developed for Italian coastal waters and then applied in many European seas (Adriatic, Tyrrhenian, Baltic, Black and Northern seas). The TRIX index does not fulfil the classification procedure suggested by the WFD for two reasons: (a) it is based on an absolute trophic scale without any normalization to type-specific reference conditions; (b) it makes an ex ante aggregation of biological (Chl-a) and physico-chemical (oxygen, nutrients) quality elements, instead of an ex post integration of separate evaluations of biological and subsequent chemical quality elements. A revisitation of the TRIX index in the light of the European Water Framework Directive (WFD, 2000/60/EC) and new TRIX derived tools are presented in this paper. A number of Italian coastal sites were grouped into different types based on a thorough analysis of their hydro-morphological conditions, and type-specific reference sites were selected. Unscaled TRIX values (UNTRIX) for reference and impacted sites have been calculated and two alternative UNTRIX-based classification procedures are discussed. The proposed procedures, to be validated on a broader scale, provide users with simple tools that give an integrated view of nutrient enrichment and its effects on algal biomass (Chl-a) and on oxygen levels. This trophic evaluation along with phytoplankton indicator species and algal blooms contribute to the comprehensive assessment of phytoplankton, one of the biological quality elements in coastal waters.     

The origins of Antarctic rock glaciers: periglacial or glacial features?

In extensively glaciarized permafrost areas such as Northern Victoria Land, rock glaciers are quite common and are considered postglacial cryotic landforms. This paper reveals that two rock glaciers in Northern Victoria Land (at Adélie Cove and Strandline) that are located close to the Italian Antarctic Station (Mario Zucchelli Station) should have the same origin, although they were previously mapped as Holocene periglacial landforms and subsequently considered ice‐cored and ice‐cemented rock glaciers, respectively. In fact, by integrating different geophysical investigations and borehole stratigraphy, we show that both landforms have similar internal structures and cores of buried glacier ice. Therefore, this kind of rock glacier is possibly related to the long‐term creep of buried ice rather than to permafrost creep alone. This interpretation can be extended to the larger part of the features mapped as rock glaciers in Antarctica. In addition, a high‐reflective horizon sub‐parallel to the topographic surface was detected in Ground Probing Radar (GPR) data over a large part of the study area. Combining all the available information, we conclude that it cannot be straightforwardly interpreted as the base of the active layer but rather represents the top of a cryo‐lithological unit characterized by ice lenses within sediments that could be interpreted as the transition zone between the active layer and the long‐term permafrost table. More generally, knowledge of the subsurface ice content and, in particular, the occurrence of massive ice and its depth is crucial to make realistic and affordable forecasts regarding thermokarst development and related feedbacks involving GHG emissions, especially in the case of cryosoils rich in carbon content. Copyright © 2017 John Wiley & Sons, Ltd.     

Live-bed scour downstream of block ramps for low densimetric Froude numbers

Sediment load plays a major role in the morphological evolution of rivers.Therefore,the analysis of the sediment load interaction with hydraulic structures is of main importance in order to enhance the preservation of fish habitats and river morphological characteristics.The present study analyzes the scour mechanisms downstream of a block ramp in live bed conditions,when the sediment supplied by the approaching flow is balanced by the sediment transported out of the scour hole.Experiments were performed in a model flume and the effect of the approaching sediment concentration on the scour geometry was analyzed.It was observed that the scour features depend deeply on the approaching sediment concentration and four main profile configurations were distinguished.The experimental data were analyzed and empirical relationships were developed in order to evaluate the depth and length of a scour hole,the dune height and the distance of the transversal section of maximum dune height from the ramp toe for different hydraulic and geometric conditions.It was also proved that the dynamic equilibrium shape of a scour hole does not depend on the sediment load time history.     

Designing river water quality policy interventions with scarce data: the case of the Middle Tagus Basin,Spain

ABSTRACT

Anthropic pressures deteriorate river water quality, so authorities need to identify their causes and define corrective actions. Physically based water quality models are a useful tool for addressing physicochemical pollutants, but they must be calibrated with an amount of data that is often unavailable. In this study, we explore the characterization of a model to design corrective interventions in a context of sparse data. A calibration indicator that is both simple and flexible is proposed. This approach is applied to the Middle Tagus Basin in central Spain, where the physicochemical concentration of pollutants is above legal standards. We quantify the effects of the main existing pressures (discharge from wastewater treatment plants, agricultural diffuse pollution and a major inter-basin water transfer) on the receiving waters. In particular, the study finds that wastewater treatment plant effluent concentrations should be reduced to up to 0.65 mg/L of ammonium and 0.55 mg/L of phosphate to achieve the environmental goals. We propose and prioritize a set of policy actions that would contribute to the good status of surface water bodies in the region.     

Types of eruptions of Etna volcano AD 1670–2003: implications for short-term eruptive behaviour

Analysis of the historical records of Etnas eruptive activity for the past three centuries shows that, after the large 1669 eruption, a period of about 60 years of low-level activity followed. Starting from 1727, explosive activity (strombolian, lava fountaining and subplinian) at the summit crater increased exponentially to the present day. Since 1763, the frequency of flank eruptions also increased and this value remained high until 1960; afterward it further increased sharply. In fact, the number of summit and flank eruptions between 1961 and 2003 was four times greater than that of the pre-1960 period. This long-term trend of escalating activity rules out a pattern of cyclic behaviour of the volcano. We propose instead that the 1670–2003 period most likely characterises a single eruptive cycle which began after the large 1669 eruption and which is still continuing.On the basis of the eruptive style, two distinct types of flank eruptions are recognised: Class A and Class B. Class A eruptions are mostly effusive with associated weak strombolian activity; Class B eruptions are characterised by effusive activity accompanied by intense, long-lasting, strombolian and lava fountaining activity that produces copious tephra fallouts, as during the 2001 and 2002–2003 eruptions. Over the past three centuries, seven Class B eruptions have taken place with vents located mainly on the south-eastern flank, indicating that this sector of the volcano is a preferential zone for the intrusion of volatile-rich magma rising from the deeper region of the Etna plumbing system.Electronic Supplementary Material Supplementary material is available for this article at Editorial responsibility: M. Carroll     

Stress Changes due to Recent Seismic Events in the Central Apennines (Italy)

The Central Apennines, Italy, are characterized by moderate seismic activity on normal faults, oriented in directions parallel to the Apenninic chain. The subject of this study is the Umbria-Marche Apennines, a segment approximately 200-km long, where three main seismic events occurred in the last three decades. The 1979 Norcia earthquake was a M_w = 5.8 event, taking place at the south end of the considered segment. The 1984 Gubbio earthquake was a M_w = 5.6 event which took place at the north end. The 1997-1998 Colfiorito sequence constituted 8 main shocks with magnitudes M_w between 5 and 6 and epicenters located between the Gubbio and the Norcia earthquake areas. A model made of an elastic half-space is considered, in which the seismic sources are represented by rectangular dislocations which have the appropriate values of source parameters, and in which the static stress field produced by each event is calculated. The analysis of the Coulomb stress change (ΔC) as a function of time shows that the coseismic stress transfer and fault interaction played an important role in the region during the past three decades: 7 earthquakes of the 9 considered took place where ΔC>0. Such an interaction has been confirmed by the analysis of the aftershocks in the Colfiorito zone post September 26, 1997: about the 61% of the aftershocks considered took place where ΔC>0. The comparison between the ΔC^s due to the coseismic stress transfer and the rate ΔĊ^t due to the tectonic stress allows us to quantify the time advance of the earthquakes. The ΔC^s pattern shows positive values in two areas that can be regarded as historical seismic gaps.     

Seasonal and event-controlled export of organic matter from the shelf towards the Gulf of Lions continental slope

To investigate the role of coastal canyons in the transfer of organic matter from the shelf to the slope and basin, we deployed sediment trap/current meter pairs at the head of five canyons in the Gulf of Lions (GoL) between November 2003 and May 2004. Analysis of organic carbon, biogenic silica, Corg isotopic composition, Corg/total nitrogen, chloropigments, and amino acids clearly shows the seasonal influence and effect of extreme meteorological events on the composition of collected particles. The sampling period was divided into three “scenarios”. The first corresponded to a large easterly storm and flood of the Rhone river during stratified water column conditions; the composition of material collected during this event was influenced by increased transfer of riverine and coastal particulate matter, with a lower Corg content. During the second “fall-winter” scenario, northern and northwestern winds blowing over the shelf caused cooling and homogenization of the shelf water column; particles collected at this time reflected the homogeneous source of particulate matter transported through canyons; particles sitting in the vicinity of canyon heads are most likely swept downslope by the general south-westward circulation. Organic tracers indicate a degraded origin for organic matter transported during this period. A third “spring” scenario corresponded to northern winds alternating with eastward windstorms that triggered and/or enhanced the cascading of dense waters accumulated on the bottom of the shelf due to previous cooling. These conditions occurred in conjunction with increased phytoplankton productivity in shelf surface waters. Organic matter advected mainly by dense shelf water cascading was fresher due to the transport of newly produced particles and a variable terrestrial fraction; this fraction depended on the proportion of resuspended material accumulated during previous high discharge periods that was involved in each transport pulse. The tight link shown between meteorological conditions and organic matter transport is important for continental margin geochemical studies as future changes in climatic conditions may lead to dramatic changes in carbon sequestration capability and in the ecosystems of deep margin environments.     

Anomalously deep earthquakes in northwestern Italy

It is usually assumed that earthquakes in intraplate regions occur in the upper crust, and northwestern Italy is generally assigned to this kind of normal seismicity. In this work, the depth distribution of the events localized in this area by the Istituto Geofisico Geodetico (IGG) seismic network in the period 1991–1997 is analyzed in detail. In particular, the location capability of the network is discussed, adopting as reference quarry blasts (for the epicentral position) and the locations obtained from a dense temporary network (for the depth estimate). Within the so-obtained error limits, the depth distribution of events show a characteristic pattern: while for most of the area covered by the network the well-located seismicity lies within the first 20 km of depth, in a band following the inner arc of the Western Alps, numerous events have anomalously large focal depths, reaching a maximum of 114 km. These depth determinations cannot be attributed to instabilities of the location procedure: different choices of the propagation models used for the hypocentral determination led to very similar depth values, always significantly larger than the standard values for the surrounding areas. A strong correlation has been found between the 3-dimensional distribution of these foci and the P-wave propagation anomalies obtained from tomographic studies, suggesting a direct link between elastic and rheological properties of lower crust and upper mantle in this area.     

MAGNÉTOMÈTRE DIFFÉRENTIEL À HAUTE SENSIBILITÉ*

The aim of this article is to describe the double resonance magnetometer system designed and built by the Division de Magnétométrie of the C.E.N. Grenoble, and used by the Département des Recherches Minières du CE.A. For the measurement of magnetic anomalies of geological origin it is necessary to make differential measurements between a mobile instrument which scans the region of interest and a fixed compensatory instrument. The apparatus described here features the following main characteristics: — it gives a direct numerical measurement of the differential magnetic field between the two instruments with an accuracy of 0.01 gamma (10^-7 Oe). — it is designed to be easily operated in geological field work (light weight, low power, possibility to make continuous measurements along a given profile, the measuring signals being radio-linked there are no wires connecting the instruments). Firstly we describe the components of the magnetometer itself namely: double resonance magnetometer heads and differential numerical magnetometer. Secondly we describe the measuring technique.