Influence of melt‐freeze‐cycles on the radionuclide transport in homogeneous laboratory snowpack

Radionuclides released to the environment and deposited with or onto snow can be stored over long time periods if ambient temperature stays low, particularly in glaciated areas or high alpine sites. The radionuclides will be accumulated in the snowpack during the winter unless meltwater runoff at the snow base occurs. They will be released to surface waters within short time during snowmelt in spring. In two experiments under controlled melting conditions of snow in the laboratory, radionuclide migration and runoff during melt‐freeze‐cycles were examined. The distribution of Cs‐134 and Sr‐85 tracers in homogeneous snow columns and their fractionation and potential preferential elution in the first meltwater portions were determined. Transport was associated with the percolation of meltwater at ambient temperatures above 0 °C after the snowpack became ripe. Mean migration velocities in the pack were examined for both nuclides to about 0.5 cm hr^?1 after one diurnal melt‐freeze‐cycle at ambient temperatures of ?2 to 4 °C. Meltwater fluxes were calculated with a median of 1.68 cm hr^?1. Highly contaminated portions of meltwater with concentration factors between 5 and 10 against initial bulk concentrations in the snowpack were released as ionic pulse with the first meltwater. Neither for caesium nor strontium preferential elution was observed. After recurrent simulated day‐night‐cycles (?2 to 4 °C), 80% of both radionuclides was released with the first 20% of snowmelt within 4 days. 50% of Cs‐134 and Sr‐85 were already set free after 24 hr. Snowmelt contained highest specific activities when the melt rate was lowest during the freeze‐cycles due to concentration processes in remaining liquids, enhanced by the melt‐freeze‐cycling. This implies for natural snowpack after significant radionuclide releases, that long‐time accumulation of radionuclides in the snow during frost periods, followed by an onset of steady meltwater runoff at low melt rates, will cause the most pronounced removal of the contaminants from the snow cover. This scenario represents the worst case of impact on water quality and radiation exposure in aquatic environments.     

Investigation of groundwater resources using controlled-source radio magnetotellurics (CSRMT) in glacial deposits in Heby,Sweden

We have combined tensor radio magnetotelluric- (RMT, 15–250 kHz) and controlled source tensor magnetotelluric (CSTMT, 1–12 kHz) data for the mapping of aquifers in gravel formations lying in between crystalline bedrock and clay rich sediments in the Heby area some 40 km west of Uppsala in Sweden. The estimated transfer functions, the impedance tensor and the tipper vector generally satisfy 1D or 2D necessary conditions except for the lowest CSTMT frequencies where near field effects become more dominant.The data measured from 8 profiles were inverted with the Rebocc code of Siripunvaraporn and Egbert (2000) assuming plane wave conditions. This meant that only 12 frequencies in the range of 4–180 kHz could be used. The four lowest frequencies of CSTMT in the range of 1–2.8 kHz were excluded because of source effects. Data from all profiles were inverted with a starting model of 100 Ω-m and a relative error floor of 0.02 on apparent resistivity, corresponding to less than 1^° on phase. Tipper vectors are generally small except when source effects become dominant in the lowest frequencies of CSTMT and were therefore not used for inversion. Comparing with models derived from vertical electrical soundings, refraction and reflection seismic data as well as ground truth from exploration wells assessed the reliability of the deep part of the models. Furthermore we carried out a non-linear resolution analysis to better quantify the depth extent of the aquifers.The inverted models from the Heby area show well the thickness variations of glacial deposits overlying crystalline bedrock. Generally, the upper 20 m of the models have resistivities below 40 Ω-m, taken to represent clay rich formations. Below the clay layer resistivities increase to about 40–400 Ω-m, interpreted to represent sand/gravel formations with a maximum thickness of about 40 m and a width of several hundred metres. This is a potential aquifer that extends in approximately N–S direction for some kilometres.     

Monsoonal forcing of Holocene paleoenvironmental change on the central Tibetan Plateau inferred using a sediment record from Lake Nam Co (Xizang,China)

This study focuses on Holocene monsoon dynamics on the central Tibetan Plateau (TP) inferred using a sediment record from Lake Nam Co. A high-resolution (decadal) multi-proxy approach, using geochemical, micropaleontological, and sedimentological methods was applied. Fifteen AMS-¹⁴C ages were used to establish the chronology, assuming a reservoir effect of 1,420 years. Our results point to a first strong monsoonal pulse at Lake Nam Co ~11.3 cal ka BP, followed by colder and drier conditions until ~10.8 cal ka BP. A warm and humid climate from ~10.8 to ~9.5 cal ka BP is related to a strong summer monsoon on the central TP, triggering a lake-level highstand at ~9.5 cal ka BP. Declining minerogenic input after ~9.5 cal ka BP indicates less moisture availability until ~7.7 cal ka BP. Following stable conditions between ~7.7 and ~6.6 cal ka BP, a warm and wet climate is inferred for the time span from ~6.6 to ~4.8 cal ka BP. A change towards drier conditions after ~4.8 cal ka BP points to a weakening of the Indian Ocean Summer Monsoon on the central TP, further diminished after ~2.0 cal ka BP. A short-term wet spell occurred from ~1.5 to ~1.3 cal ka BP. By comparing the results derived from Lake Nam Co with several lacustrine records from the central, northern, and eastern TP, a similar but not synchronous pattern of monsoon-driven paleoenvironmental change is observed. Although the general trend of lake and catchment evolution on the TP during the Holocene is also reproduced in this record, pronounced spatial and temporal offsets with respect to distinct climate events were detected, suggesting periods of non-uniform moisture and temperature evolution.     

Evaluation of the impact of atmospheric pressure loading modeling on GNSS data analysis

In recent years, several studies have demonstrated the sensitivity of Global Navigation Satellite System (GNSS) station time series to displacements caused by atmospheric pressure loading (APL). Different methods to take the APL effect into account are used in these studies: applying the corrections from a geophysical model on weekly mean estimates of station coordinates, using observation-level corrections during data analysis, or solving for regression factors between the station displacement and the local pressure. The Center for Orbit Determination in Europe (CODE) is one of the global analysis centers of the International GNSS Service (IGS). The current quality of the IGS products urgently asks to consider this effect in the regular processing scheme. However, the resulting requirements for an APL model are demanding with respect to quality, latency, and—regarding the reprocessing activities—availability over a long time interval (at least from 1994 onward). The APL model of Petrov and Boy (J Geophys Res 109:B03405, 2004) is widely used within the VLBI community and is evaluated in this study with respect to these criteria. The reprocessing effort of CODE provides the basis for validating the APL model. The data set is used to solve for scaling factors for each station to evaluate the geophysical atmospheric non-tidal loading model. A consistent long-term validation of the model over 15 years, from 1994 to 2008, is thus possible. The time series of 15 years allows to study seasonal variations of the scaling factors using the dense GNSS tracking network of the IGS. By interpreting the scaling factors for the stations of the IGS network, the model by (2004) is shown to meet the expectations concerning the order of magnitude of the effect at individual stations within the uncertainty given by the GNSS data processing and within the limitations due to the model itself. The repeatability of station coordinates improves by 20% when applying the effect directly on the data analysis and by 10% when applying a post-processing correction to the resulting weekly coordinates compared with a solution without taking APL into account.     

New findings on the tectono-metamorphic history of the western Rhenish Massif (Germany) by K–Ar dating of metasedimentary illite

Metapelites, clay-rich sandstones and volcanics from Cambrian, Ordovician and Lower Devonian strata of the western Rhenish Massif underwent a complex regional Variscan tectono-thermal evolution, as shown by mineralogical and K–Ar isotopic analyses of the illite to mica components from three NW-SE transects. The metamorphic degree extended from an anchimetamorphic to an epimetamorphic intensity during two major episodes of illite crystallization at 328 ± 6 and 282 ± 12 Ma. A further late orogenic or post-orogenic extensional activity could also be detected, but not precisely, around 270 Ma, probably recorded by the precipitation of illite in new or reactivated extensional faults with upward moving heat flows.     

Depth matters: Microbial eukaryote diversity and community structure in the eastern North Pacific revealed through environmental gene libraries

Protistan community structure was examined from 6 depths (1.5, 20, 42, 150, 500, 880 m) at a coastal ocean site in the San Pedro Channel, California. A total of 856 partial length 18S rDNA protistan sequences from the six clone libraries were analyzed to characterize diversity present at each depth. The sequences were grouped into a total of 259 Operational Taxonomic Units (OTUs) that were inferred using an automated OTU calling program that formed OTUs with approximately species-level distinction (95% sequence similarity). Most OTUs (194 out of 259) were observed at only one specific depth, and only two were present in clone libraries from all depths. OTUs were obtained from 21 major protistan taxonomic groups determined by their closest BLAST matches to identified protists in the NCBI database. Approximately 74% of the detected OTUs belonged to the Chromalveolates, with Group II alveolates making up the largest single group. Protistan assemblages at euphotic depths (1.5, 20 and 42 m) were characterized by the presence of clades that contained phototrophic species (stramenopiles, chlorophytes and haptophytes) as well as consumers (especially ciliates). Assemblages in the lower water column (150, 500 and 800 m) were distinct from communities at shallow depths because of strong contributions from taxa belonging to euglenozoans, acantharians, polycystines and Taxopodida (Sticholonche spp. and close relatives). Species richness (Chao I estimate) and diversity (Shannon index) were highest within the euphotic zone and at 150 m, and lowest for protistan assemblages located in the oxygen minimum zone (500 and 880 m). Multivariate analyses (Bray-Curtis coefficient) confirmed that protistan assemblage composition differed significantly when samples were grouped into shallow (≤150 m) and deep water assemblages (≥150 m).     

Response of the Asian summer Monsoons to a high-latitude thermal forcing: mechanisms and nonlinearities

This study investigates mechanisms and nonlinearities in the response of the Asian Summer Monsoons (ASM) to high-latitude thermal forcings of different amplitudes. Using a suite of runs carried out with an intermediate-complexity atmospheric general circulation model, we find that the imposed forcings produce a strong precipitation response over the eastern ASM but a rather weak response over the southern ASM. The forcing also causes a precipitation dipole with wet conditions over the eastern Tibetan Plateau (TP) and dry conditions over the Bay of Bengal (BoB) and southeast Asia. A moderate increase of precipitation along the southern margin of the TP is also produced. Simulations designed to isolate the causal mechanisms show that thermodynamic interactions involving the tropical surface oceans are far less important than the water-vapour feedback for the transmission of information from the high-latitudes to the ASM. Additionally, we assess the nonlinearity of the ASM precipitation response to the forcing amplitude using a novel application of the empirical orthogonal function method. The response can be decomposed in two overlapping patterns. The first pattern represents a precipitation dipole with wet conditions over the eastern TP and dry conditions over BoB, which linearly increases with forcing amplitude becoming quasi-stationary for large forcing amplitudes (i.e. amplitudes leading to Arctic temperature anomalies larger than 10 °C). The second pattern is associated with increased precipitation over the southeastern TP and is nonlinearly dependent on forcing, being most important for intermediate forcing amplitudes (i.e. amplitudes leading to Arctic temperature anomalies between 5 and 10 °C).     

Analysis of lightning-induced forest fires in Austria

Besides human-caused fires, lightning is the major reason for forest fire ignition in Austria. In order to analyse the causes of ignition and to characterise lightning-induced forest fires, fire records were compared with the real appearance of lightning events by using the Austrian Lightning Detection and Information System for the period from 1993 to 2010. A probability was estimated for each forest fire being caused by lightning by using a decision tree and decision matrices based on flash characteristics (e.g. amplitude, time, location). It could be shown that 15 % of documented forest fires were lightning-caused. Nearly all lightning-caused fires were found during the summer months, whereas almost 40 % of all fires occurring from June to August were naturally caused. Most lightning-caused fires took place in the south and east of Austria. Lightning fires were more frequent at higher altitudes and primarily affected conifer forests. The median burned area was lower than that for anthropogenic forest fires.