Scaling Transition in Earthquake Sources: A Possible Link Between Seismic and Laboratory Measurements

We estimate the corner frequencies of 20 crustal seismic events from mainshock–aftershock sequences in different tectonic environments (mainshocks 5.7 < M _W < 7.6) using the well-established seismic coda ratio technique (Mayeda et al. in Geophys Res Lett 34:L11303, 2007; Mayeda and Malagnini in Geophys Res Lett, 2010), which provides optimal stability and does not require path or site corrections. For each sequence, we assumed the Brune source model and estimated all the events’ corner frequencies and associated apparent stresses following the MDAC spectral formulation of Walter and Taylor (A revised magnitude and distance amplitude correction (MDAC2) procedure for regional seismic discriminants, 2001), which allows for the possibility of non-self-similar source scaling. Within each sequence, we observe a systematic deviation from the self-similar \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - 3} \) line, all data being rather compatible with \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - (3 + \varepsilon )} \) , where ε > 0 (Kanamori and Rivera in Bull Seismol Soc Am 94:314–319, 2004). The deviation from a strict self-similar behavior within each earthquake sequence of our collection is indicated by a systematic increase in the estimated average static stress drop and apparent stress with increasing seismic moment (moment magnitude). Our favored physical interpretation for the increased apparent stress with earthquake size is a progressive frictional weakening for increasing seismic slip, in agreement with recent results obtained in laboratory experiments performed on state-of-the-art apparatuses at slip rates of the order of 1 m/s or larger. At smaller magnitudes (M _W < 5.5), the overall data set is characterized by a variability in apparent stress of almost three orders of magnitude, mostly from the scatter observed in strike-slip sequences. Larger events (M _W > 5.5) show much less variability: about one order of magnitude. It appears that the apparent stress (and static stress drop) does not grow indefinitely at larger magnitudes: for example, in the case of the Chi–Chi sequence (the best sampled sequence between M _W 5 and 6.5), some roughly constant stress parameters characterize earthquakes larger than M _W ~ 5.5. A representative fault slip for M _W 5.5 is a few tens of centimeters (e.g., Ide and Takeo in J Geophys Res 102:27379–27391, 1997), which corresponds to the slip amount at which effective lubrication is observed, according to recent laboratory friction experiments performed at seismic slip velocities (V ~ 1 m/s) and normal stresses representative of crustal depths (Di Toro et al. in Nature in press, 2011, and references therein). If the observed deviation from self-similar scaling is explained in terms of an asymptotic increase in apparent stress (Malagnini et al. in Pure Appl Geophys, 2014, this volume), which is directly related to dynamic stress drop on the fault, one interpretation is that for a seismic slip of a few tens of centimeters (M _W ~ 5.5) or larger, a fully lubricated frictional state may be asymptotically approached.     

Structure of the Keck Telescope — An overview

The structure of the Keck Telescope is briefly described. The design required an innovative approach made necessary by the revolutionary nature of the segmented primary mirror, by the very stringent weight and cost limitations, and by observational and operational needs. Analysis of a progressively more detailed computer model predicts that all design objectives will be met, as shown in a summary of performance characteristics. The paper is illustrated with a number of drawings.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2 1988.     

Guidelines for sampling bedload transport with minimum uncertainty

The stability of river channels and their suitability as habitat for aqueous organisms is strongly controlled by the rate of bedload transport. Quantification of bedload transport rates in rivers is difficult, not only because of the temporal variation in transport, but also because of the cross‐channel variation in transport. The objectives of this study were: (i) to determine the effect of cross‐channel variation in bedload transport on the uncertainty of width‐integrated transport rates; and to use this knowledge (ii) to improve guidelines for bedload sampling. This was done through a thorough statistical evaluation of stochastic and systematic uncertainties involved in bed‐load transport measurements. Based on this evaluation, new guidelines are presented for determination of the number of samples and sampling positions across the channel that are required for bedload measurements in several types of sand‐bed rivers and gravel‐bed rivers. The guidelines relate to bedload measurements made with pressure‐difference (Helley‐Smith type) samplers that require numerous bedload samples of short duration at several positions across the channel. The results show that generally more sampling positions across the channel are required in gravel‐bed rivers than in sand‐bed rivers. For gravel‐bed rivers with unknown cross‐channel distribution of transport, at least 10 sampling positions are recommended, whereas for most sand‐bed rivers five positions suffice. In addition, at least 12 short‐duration samples are required at each position to obtain bedload estimates with uncertainties below 20%. If the same level of uncertainty is desired in the case of high spatial and temporal variation in transport rates, the number of short‐duration samples needed per sampling position increases to 40.     

Links Between Bottom-Water Anoxia,the Polychaete <Emphasis Type="Italic">Nereis diversicolor</Emphasis>, and the Growth of Green-Algal Mats

Sediment–water incubations were used to study effects of episodic anoxia on filamentous Ulva sp. Treatments included undisturbed sediment with (AnoxSed) and without (NatSed) exposure to 5 days of anoxia, and cores with only the top 0.5 cm of sediment (SurfSed; no macrofauna, restricted pore-water nutrient pool). All three treatments contained Ulva propagules. An Ulva mat developed in the SurfSed, and after the anoxic period in the AnoxSed cores. No growth was observed in the NatSed treatment. In the AnoxSed, Ulva was progressively removed upon reoxygenation through grazing by Nereis. The results suggest that episodic anoxia stimulates the growth of macroalgal mats not only by increasing the availability of nutrients from the sediment, but also by reducing macrofaunal grazing pressure. Infauna (grazing and bioturbation), benthic microalgae (nutrient competition and retention), and pore-water nutrients appear key components in a biogeochemical network with complex feedbacks controlling the growth of green-algal mats in shallow-water systems.     

Buried pockmarks on the Top Chalk surface of the Danish North Sea and their potential significance for interpreting palaeocirculation patterns

Three-dimensional (3D) seismic data from the southern Danish North Sea were used to analyse the morphology and spatial distribution of depressions in the Danian Chalk deposit. Previously, these depressions were either interpreted as karst structures or pockmarks. The observed depressions occur in an interval from 25 ms below to 12 ms above the Top Chalk surface. Three types of depressions were differentiated based on their plan-view geometry and their degree of symmetry: Type 1, comprising sub-circular and symmetrical depressions, is the dominant group (ca. 70 %). Type 2, elongated and symmetrical depressions, represents only a small fraction (ca. 5 %). The elongated and asymmetrical depressions of Type 3 compose ca. 25 %. In cross section, each depression type can be either characterised by a V- or a U-shape. The maximum size of the depressions ranges from 50 to 580 m, with an average internal depth of 10 m. We interpret the depressions as pockmarks formed by the expulsion of biogenic or thermogenic fluids at the Danian seafloor. Likely, the initial form of the pockmarks has been circular (Type 1) and was subsequently modified for Types 2 and 3 to an elongated form by currents. The long axis of the pockmarks is interpreted to represent the effective current direction. The inferred direction is sub-parallel to the palaeobathymetric contours. The 3D seismic interpretation of pockmarks presented in this paper contributes to the understanding of fluid migration and palaeocirculation patterns during the sedimentation of the terminal Chalk Group in the southern Danish North Sea.     

Earthquakes in Switzerland and surrounding regions during 2006

This report of the Swiss Seismological Service summarizes the seismic activity in Switzerland and surrounding regions during 2006. During this period, 572 earthquakes and 91 quarry blasts were detected and located in the region under consideration. Of these earthquakes, two occurred in conjunction with the construction of the new Gotthard railway tunnel and 165 were induced artificially by the stimulation of a proposed geothermal reservoir beneath the city of Basel. With 20 events with M _L ≥ 2.5, five of which were artificially induced, the seismic activity in the year 2006 was far below the average over the previous 31 years. Nevertheless, six events were felt by the public, most prominently the strongest of the induced Basel events (M _L 3.4), which caused some non-structural building damage. Noteworthy are also the two earthquakes near Cortaillod (M _L 3.2), on the shore of Lake Neuchatel, and in Val Mora (M _L 3.5), between the Engadin and Val Müstair, as well as the 42 aftershocks of the M _L 4.9 Vallorcine earthquake, between Martigny and Chamonix, of September 2005. Editorial handling: Stefan Bucher     

North Atlantic climate impact on early late‐glacial climate oscillations in the south‐eastern Alps inferred from a multi‐proxy lake sediment record

High‐resolution multi‐proxy analyses of a sediment core section from Lake Jeserzersee (Saissersee) in the piedmont lobe of the Würmian Drau glacier (Carinthia, Austria) reveal pronounced climatic oscillations during the early late glacial (ca. 18.5–16.0k cal a BP). Diatom‐inferred epilimnetic summer water temperatures show a close correspondence with temperature reconstructions from the adjacent Lake Längsee record and, on a hemispheric scale, with fluctuations of ice‐rafted debris in the North Atlantic. This suggests that North Atlantic climate triggered summer climate variability in the Alps during the early late glacial. The expansion of pine (mainly dwarf pine) between ca. 18.5 and 18.1k cal a BP indicates warming during the so‐called ‘Längsee oscillation’. The subsequent stepwise climate deterioration between ca. 18.1 and 17.6k cal a BP culminated in a tripartite cold period between ca. 17.6 and 16.9k cal a BP with diatom‐inferred summer water temperatures 8.5–10 °C below modern values and a shift from wet to dry conditions. This period probably coincides with a major Alpine glacier advance termed the Gschnitz stadial. A warmer interval between ca. 16.9 and 16.4k cal a BP separates this cold phase from a second, shorter and less pronounced cold phase between ca. 16.4 and 16.0k cal a BP, which is thought to correlate with the Clavadel/Senders glacier advance in the Alps. The following temperature increase, coupled with wet (probably snow‐rich) conditions, caused the expansion of birch during the transition period to the late glacial interstadial. Copyright © 2011 John Wiley & Sons, Ltd.     

Identification and distribution of intact polar branched tetraether lipids in peat and soil

Branched glycerol dialkyl glycerol tetraether lipids (GDGTs) are membrane lipids of soil bacteria that occur ubiquitously in soil, but their occurrence as intact polar lipids (IPLs) has not been well studied. Here, we report the identification and distribution of IPL-branched GDGTs throughout a depth profile of a Swedish peat bog. In addition to two reported glycosidic IPL branched GDGTs, we identified IPL branched GDGTs with a hexose-glycuronic acid, phospho-hexose, or hexose-phosphoglycerol head group, based on mass spectrometry. A selected reaction monitoring (SRM) assay was developed to monitor changes in head group distribution with depth. The abundance of the IPL branched GDGTs increased below the water table, suggesting that they were primarily produced in this part of the peat. This was supported by the concentrations of core lipid and IPL-derived branched GDGTs, which also substantially increased below the water table. However, individual IPL trends differed, which may be due to changes in the microbial community composition with depth or to different degradation rates for the different IPL branched GDGTs. The SRM method was also applied to two different soil types, which showed that similar IPL branched GDGTs as those in peat were present, albeit with different distributions.