Glacier variations in Breheimen,southern Norway: dating Little Ice Age moraine sequences at seven low‐altitude glaciers

Moraine sequences in front of seven relatively low‐altitude glaciers in the Breheimen region of central southern Norway are described and dated using a ‘multi‐proxy’ approach to moraine stratigraphy. Lichenometric dating, based on the Rhizocarpon subgenus, is used to construct a composite moraine chronology, which indicates eight phases of synchronous moraine formation: AD 1793–1799, 1807–1813, 1845–1852, 1859–1862, 1879–1885, 1897–1898, 1906–1908 and 1931–1933. Although the existence of a few cases of older moraines, possibly dating from earlier in the eighteenth or late in the seventeenth centuries cannot be ruled out by lichenometry, Schmidt hammer R‐values from boulders on outermost moraine ridges suggest an absence of Holocene moraines older than the Little Ice Age. Twenty‐three radiocarbon dates from buried soils and peat associated with outermost moraines at three glaciers—Tverreggibreen, Storegrovbreen and Greinbreen—also indicate that the ‘Little Ice Age’ glacier maximum was the Neoglacial maximum at most if not all glaciers. Several maximum age estimates for the Little Ice Age glacier maximum range between the fifteenth and seventeenth centuries, with the youngest from a buried soil being AD 1693. A pre‐Little Ice Age maximum cannot be ruled out at Greinbreen, however, where the age of buried peat suggests the outermost moraine dates from AD 981–1399 (at variance with the lichenometric evidence). Glaciofluvial stratigraphy at Tverreggibreen provides evidence for minor glacier advances about AD 655–963 and AD 1277–1396, respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

Terrestrial carbon-isotope records from coastal deposits (Algarve, Portugal): a tool for chemostratigraphic correlation on an intrabasinal and global scale

ABSTRACT The carbon-isotope signature of terrestrial organic matter (OM) offers a valuable tool to develop stratigraphic correlations for near-shore deposits. A mid-Cretaceous coastal succession of the western Algarve Basin, Portugal, displays a marked negative δ¹³C excursion ranging from − 21.2‰ to − 27.8‰ in the Early Aptian followed by two shifts towards higher values (up to − 19.3‰) during the Early and Late Aptian, respectively. The dominance of cuticle and leaf debris in the bulk OM fraction is confirmed by optical studies, Rock-Eval pyrolysis and by comparison with the δ¹³C signature of four different types of fossilized land-plant particles. Correlation of two terrestrial δ¹³C_bulk OM records from different study sites leads to a significant enhancement of the intrabasinal stratigraphic correlation within the Algarve Basin. Three prominent excursions in the Portuguese records can be correlated with existing δ¹³C curves from pelagic and terrestrial environments. The general carbon-isotope pattern is superimposed by small-scale fluctuations which can be explained by compositional variations within the OM.     

CODE’s five-system orbit and clock solution—the challenges of multi-GNSS data analysis

This article describes the processing strategy and the validation results of CODE’s MGEX (COM) orbit and satellite clock solution, including the satellite systems GPS, GLONASS, Galileo, BeiDou, and QZSS. The validation with orbit misclosures and SLR residuals shows that the orbits of the new systems Galileo, BeiDou, and QZSS are affected by modelling deficiencies with impact on the orbit scale (e.g., antenna calibration, Earth albedo, and transmitter antenna thrust). Another weakness is the attitude and solar radiation pressure (SRP) modelling of satellites moving in the orbit normal mode—which is not yet correctly considered in the COM solution. Due to these issues, we consider the current state COM solution as preliminary. We, however, use the long-time series of COM products for identifying the challenges and for the assessment of model-improvements. The latter is demonstrated on the example of the solar radiation pressure (SRP) model, which has been replaced by a more generalized model. The SLR validation shows that the new SRP model significantly improves the orbit determination of Galileo and QZSS satellites at times when the satellite’s attitude is maintained by yaw-steering. The impact of this orbit improvement is also visible in the estimated satellite clocks—demonstrating the potential use of the new generation satellite clocks for orbit validation. Finally, we point out further challenges and open issues affecting multi-GNSS data processing that deserves dedicated studies.     

Temperature-jump induced cation exchange kinetics in (Co<Subscript>0.1</Subscript>Mg<Subscript>0.9</Subscript>)<Subscript>2</Subscript>SiO<Subscript>4</Subscript> olivine: an in situ optical spectroscopic study

In the olivine crystal structure, cations are distributed over two inequivalent octahedral sites, M1 and M2. Kinetics of cation exchange between the two octahedral sites in (Co_0.1Mg_0.9)₂SiO₄ single crystal have been studied in the temperature range from 600 to 800°C by monitoring the time evolution of the absorbance of Co²⁺ ions in M1 or M2 sites using optical spectroscopy after rapid temperature jumps. It was found from such temperature-jump induced relaxation experiments that with increasing temperature the absorbance of Co²⁺ ions in the M1 site decreases while that in the M2 site increases. This indicates a tendency of Co²⁺ cations to populate the M2 site with increasing temperatures and vice versa. The experimental relaxation data can be modeled using a triple exponential equation based on theoretical analysis. Activation energies of 221 ± 4 and 213 ± 10 kJ/mol were derived from relaxation experiments on the M2 site and M1 site, respectively, for the cation exchange processes in (Co_0.1Mg_0.9)₂SiO₄ olivine. Implications for cation diffusion at low temperatures are discussed.     

Octoradiate Spiral Organisms in the Ediacaran of South China

Shales of the Ediacaran Doushantuo Formation of South China contain a new disc-shaped macrofossil, Eoandromeda octobrachiata, characterized by eight spiral arms that were probably housed within an outer membrane. Although the presence of eight radiating structures entails a resemblance to cnidarian octocorals as well as to ctenophores, direct homologies with these extant groups are unlikely. Instead we bring attention to the helicospiral morphology of newly reported embryos from the Doushantuo Formation, suggesting that the long-sought adults of the Ediacaran embryonic metazoans have finally been found.     

3D numerical modeling of forward folding and reverse unfolding of a viscous single-layer: Implications for the formation of folds and fold patterns

The main aims of this study are to show (i) that non-cylindrical three-dimensional (3D) fold shapes and patterns can form during a single, unidirectional shortening event and (ii) that numerical reverse modeling of 3D folding is a feasible method to reconstruct the formation of 3D buckle-folds. 3D viscous (Newtonian) single-layer folding is numerically simulated with the finite element method to investigate the formation of fold shapes during one shortening event. An initially flat layer rests on a matrix with smaller viscosity and is shortened in one direction parallel to the layering. Forward modeling with different initial geometrical perturbations on the flat layer and different lateral boundary conditions generates non-cylindrical 3D fold shapes and patterns. The simulations show that, in reality, the initial layer geometry and the boundary conditions strongly control the final fold geometry. Fold geometries produced from the forward folding models are used as initial setting in numerical reverse folding models with parameters identical to those of forward models. These reverse models accurately reconstruct the initial geometry of forward models with also only one extension event parallel to the previous shortening direction. The starting geometry of the forward models is inaccurately reconstructed by the reverse models if a significantly different viscosity ratio than in the forward models is used. This work demonstrates that reverse modeling has a high potential for reconstructing the deformation history of folded regions and rheological constraints such as viscosity ratio. Reverse models may be applied to natural 3D fold shapes and patterns in order to determine if they formed (i) during a single or multiple deformation events and (ii) as active buckle-folds with a viscosity ratio 1 or as passive, kinematic folds without buckling. This approach may find much application to fold interference patterns, in particular.     

An Approach for the Classification of Urban Building Structures Based on Discriminant Analysis Techniques

Recognition of urban structures is of interest in cartography and urban modelling. While a broad range of typologies of urban patterns have been published in the last century, relatively little research on the automated recognition of such structures exists. This work presents a sample‐based approach for the recognition of five types of urban structures: (1) inner city areas, (2) industrial and commercial areas, (3) urban areas, (4) suburban areas and (5) rural areas. The classification approach is based only on the characterisation of building geometries with morphological measures derived from perceptual principles of Gestalt psychology. Thereby, size, shape and density of buildings are evaluated. After defining the research questions we develop the classification methodology and evaluate the approach with respect to several aspects. The experiments focus on the impact of different classification algorithms, correlations and contributions of measures, parameterisation of buffer‐based indices, and mode filtering. In addition to that, we investigate the influence of scale and regional factors. The results show that the chosen approach is generally successful. It turns out that scale, algorithm parameterisation, and regional heterogeneity of building structures substantially influence the classification performance.     

The response of a basin‐scale Miocene barrier reef system to long‐term,strong subsidence on a passive continental margin,Barcoo Sub‐basin,Australian North West Shelf

The Miocene sedimentary succession of the southern Browse Basin records the response of a tropical reef system to long‐term, strong subsidence on a passive continental margin. Geological interpretation of a comprehensive two‐dimensional (2D) seismic reflectivity data set documents for the first time the development of a continuous Miocene barrier reef on the Australian North West Shelf. With a length of over 250 km, this barrier reef is among the Earth's largest in the Neogene record. A sequence stratigraphic analysis tied to well data shows that the main controls for the evolution, growth and demise of the reef system were subsidence, third‐order global‐scale eustatic variations and antecedent topography. The generally very high Miocene subsidence rates estimated for the study area cannot be explained by typical passive‐margin subsidence controlled by lithospheric cooling and sedimentary loading alone. Additional dynamic subsidence induced by mantle convection, though documented as unusually large on the northern margin of Australia during the Neogene, can be also regarded as being of only minor importance. Therefore, accelerated tectonic subsidence related to the collision of the Australian and Eurasian Plates 250–500 km north of the study area seems to exert an important influence on reef development and demise, complicated by local tectonic inversion. The Miocene tectonic reactivation and inversion of an older structural grain is interpreted to have controlled the reef development considerably by providing localized topographic highs along transpressional anticlines above basement‐rooted faults that served as preferential sites for reef growth and retreat during times of rapidly rising sea level. This exemplarily shows that the far‐field effects of collision‐induced tectonic subsidence can significantly influence carbonate systems on passive margins.