Characteristics of Scour and Deposition in Front of Breakwaters Under Irregular Broken Clapotis

First the scour and deposition patterns of the sandy seabed in front of a vertical breakwater under the action of irregular broken clapotis are investigated experimentally and classified into five types: scour type Ⅰ , scour type Ⅱ, scour type Ⅲ, deposition type Ⅰ, and deposition type Ⅱ . Secondly, the processes of formation of scour and deposition patterns are probed in comparison with those induced by regular broken clapotis and standing waves. Thirdly, the criteria for distinguishing scour and deposition patterns under irregular broken clapotis are presented.     

Dynamic Response Analysis of Interaction System of R.C. Gravity Single-Leg Platform

In this paper, the responses of the interaction system of R.C. gravity single-leg platform to seismic excitation are mainly analysed. A set of nonlinear equations for the interaction system are established by using the wave, one is the soil-structure interaction and the other is the fluid-structure interaction. The seismic response of the interaction system is analysed for the influence of the asymmetric structure, fluid action, etc. with the input of seismic SH waves in any direction. The numerical results are given for a simple example.     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

Wave-Current Forces on Small Square Cylinders (Part I)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.     

Model Test of Sand Restraining Force on Pipeline

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.     

添加维生素B_（12）生产菌高密度培养褶皱臂尾轮虫的效果

阐述把维生素Ｂ１２生产菌添加到培养水中培养褶皱臂尾轮虫ＢｒａｃｈｉｏｎｕｓＰｌｉｃａｔｉｌｉｓ的买验。共１８株细菌分离于轮虫培养池，其中，有一株产维生素Ｂ１２的假单胞杆菌ＴＰ４对轮虫的生长繁殖有明显的促进作用。把ＴＰ４菌株培养后，加入到２Ｌ的烧杯和５００Ｌ的水槽中培养泰国Ｓ型轮虫时．在９ｄ（天）和６ｄ（天）中，轮虫密度从１２４～１３９和２４２～２８８个体／ｍｌ增殖到４，４１７～５，５４０和１，０１７～１，２５４个体／ｍｌ，分别比对照组增加了４～６及２～３倍。