Energetic Charged Particles Above Thunderclouds

The French government has committed to launch the satellite TARANIS to study transient coupling processes between the Earth’s atmosphere and near-Earth space. The prime objective of TARANIS is to detect energetic charged particles and hard radiation emanating from thunderclouds. The British Nobel prize winner C.T.R. Wilson predicted lightning discharges from the top of thunderclouds into space almost a century ago. However, new experiments have only recently confirmed energetic discharge processes which transfer energy from the top of thunderclouds into the upper atmosphere and near-Earth space; they are now denoted as transient luminous events, terrestrial gamma-ray flashes and relativistic electron beams. This meeting report builds on the current state of scientific knowledge on the physics of plasmas in the laboratory and naturally occurring plasmas in the Earth’s atmosphere to propose areas of future research. The report specifically reflects presentations delivered by the members of a novel Franco-British collaboration during a meeting at the French Embassy in London held in November 2011. The scientific subjects of the report tackle ionization processes leading to electrical discharge processes, observations of transient luminous events, electromagnetic emissions, energetic charged particles and their impact on the Earth’s atmosphere. The importance of future research in this area for science and society, and towards spacecraft protection, is emphasized.     

A seasonal dipolar eddy near Ras Al Hamra (Sea of Oman)

Trajectories and hydrological data from two Argo floats indicate that warm and salty water at 200–300-m depths was ejected from the coast of Oman, near Ras al Hamra, in spring 2008, 2011, and 2012. This warm and salty water, Persian Gulf Water (PGW), once ejected from the coast, recirculated cyclonically in the western Sea of Oman, but also flowed eastward along the Iranian and Pakistani coasts. There, it was expelled seaward by mesoscale eddies as shown by other float data. Seasonal maps of salinity were computed from all available Argo floats; they showed that, in spring, PGW is present in the middle and north of the Sea of Oman, contrary to fall, when the salinity maxima lie southeast of Ras al Hadd. The ejection of PGW from Ras al Hamra is related here to the influence of a mesoscale dipolar eddy which often appears near this cape in spring. The time-averaged and empirical orthogonal functions of altimetric maps over 11 years for this season confirm the frequent presence and the persistence of this feature. From surface currents and hydrology, deep currents were computed via thermal wind balance, and the associated shear and strain fields were obtained. This deformation field is intense near Ras al Hamra, with an offshore direction. This flow structure associated with the mesoscale dipole explains PGW ejection from the coast. This observation suggests that PGW distribution in the Northern Arabian Sea can be strongly influenced by seasonal mesoscale eddies.     

Human impact on the transport of terrigenous and anthropogenic elements to peri-alpine lakes (Switzerland) over the last decades

Terrigenous (Sc, Fe, K, Mg, Al, Ti) and anthropogenic (Pb and Cu) element fluxes were measured in a new sediment core from Lake Biel (Switzerland) and in previously well-documented cores from two upstream lakes (Lake Brienz and Lake Thun). These three large peri-alpine lakes are connected by the Aare River, which is the main tributary to the High Rhine River. Major and trace element analysis of the sediment cores by inductively coupled plasma mass spectrometry (ICP-MS) shows that the site of Lake Brienz receives three times more terrigenous elements than the two other studied sites, given by the role of Lake Brienz as the first major sediment sink located in the foothills of the Alps. Overall, the terrigenous fluxes reconstructed at the three studied sites suggest that the construction of sediment-trapping reservoirs during the twentieth century noticeably decreased the riverine suspended sediment load at a regional scale. In fact, the extensive river damming that occurred in the upstream watershed catchment (between ca. 1930 and 1950 and up to 2,300 m a.s.l.) and that significantly modified seasonal suspended sediment loads and riverine water discharge patterns to downstream lakes noticeably diminished the long-range transport of (fine) terrigenous particles by the Aare River. Concerning the transport of anthropogenic pollutants, the lowest lead enrichment factors (EFs Pb) were measured in the upstream course of the Aare River at the site of Lake Brienz, whereas the metal pollution was highest in downstream Lake Biel, with the maximum values measured between 1940 and 1970 (EF Pb > 3). The following recorded regional reduction in aquatic Pb pollution started about 15 years before the actual introduction of unleaded gasoline in 1985. Furthermore, the radiometric dating of the sediment core from Lake Biel identifies three events of hydrological transport of artificial radionuclides released by the nuclear reactor of Mühleberg located at more than 15 km upstream of Lake Biel for the time period 1970–2000.     

Integrating isolated and riparian wetland modules in the PHYSITEL/HYDROTEL modelling platform: model performance and diagnosis

Mathematical modelling is a well‐accepted framework to evaluate the effects of wetlands on stream flow and watershed hydrology in general. Although the integration of wetland modules into a distributed hydrological model represents a cost‐effective way to make this assessment, the added value brought by landscape‐specific modules to a model's ability to replicate basic hydrograph characteristics remains unclear. The objectives of this paper were the following: (i) to present the adaptation of PHYSITEL (a geographic information system) to parameterize isolated and riparian wetlands; (ii) to describe the integration of specific isolated wetland and riparian wetland modules into HYDROTEL, a distributed hydrological model; and (iii) to evaluate the performance of the updated modelling platform with respect to the capacity of replicating various hydrograph characteristics. To achieve this, two sets of simulations were performed (with and without wetland modules), and the added value was assessed at three river segments of the Becancour River watershed, Quebec, Canada, using six general goodness‐of‐fit indicators and 14 water flow criteria. A sensitivity analysis of the wetland module parameters was performed to characterize their impact on stream flows of the modelled watershed. Results of this study indicate the following: (i) integration of specific wetland modules can slightly increase the capacity of HYDROTEL to replicate basic hydrograph characteristics; and (ii) the updated modelling platform allows for the explicit assessment of the impact of wetlands (e.g. typology and location) on watershed hydrology. Copyright © 2015 John Wiley & Sons, Ltd.     

Flow‐Through Stream Modeling with MODFLOW and MT3D: Certainties and Limitations

This paper aims to assess MODFLOW and MT3D capabilities for simulating the spread of contaminants from a river exhibiting an unusual relationship with an alluvial aquifer, with the groundwater head higher than the river head on one side and lower on the other (flow‐through stream). A series of simulation tests is conducted using a simple hypothetical model so as to characterize and quantify these limitations. Simulation results show that the expected contaminant spread could be achieved with a specific configuration composed of two sets of parameters: (1) modeled object parameters (hydraulic groundwater gradient, hydraulic conductivity values of aquifer and streambed), and (2) modeling parameters (vertical discretization of aquifer, horizontal refinement of stream modeled with River [RIV] package). The influence of these various parameters on simulation results is investigated, and potential complications and errors are identified. Contaminant spread from stream to aquifer is not always reproduced by MT3D due to the RIV package's inability to simulate lateral exchange fluxes between stream and aquifer. This paper identifies the need for a MODFLOW streamflow package allowing lateral stream‐aquifer interactions and streamflow routine calculations. Such developments could be of particular interest for modeling contaminated flow‐through streams.     

Earth-Affecting Solar Causes Observatory (EASCO): A potential International Living with a Star Mission from Sun–Earth L5

This paper describes the scientific rationale for an L5 mission and a partial list of key scientific instruments the mission should carry. The L5 vantage point provides an unprecedented view of the solar disturbances and their solar sources that can greatly advance the science behind space weather. A coronagraph and a heliospheric imager at L5 will be able to view CMEs broadsided, so space speed of the Earth-directed CMEs can be measured accurately and their radial structure discerned. In addition, an inner coronal imager and a magnetograph from L5 can give advance information on active regions and coronal holes that will soon rotate on to the solar disk. Radio remote sensing at low frequencies can provide information on shock-driving CMEs, the most dangerous of all CMEs. Coordinated helioseismic measurements from the Sun–Earth line and L5 provide information on the physical conditions at the base of the convection zone, where solar magnetism originates. Finally, in situ measurements at L5 can provide information on the large-scale solar wind structures (corotating interaction regions (CIRs)) heading towards Earth that potentially result in adverse space weather.     

Lithification of gas-rich chondrite regolith breccias by grain boundary and localized shock melting

We studied the fine-grained matrices (< 150 μm) of 14 gas-rich ordinary chondrite regolith breccias in an attempt to decipher the nature of the lithification process that converted loose regolith material into consolidated breccias. We find that there is a continuous gradation in matrix textures from nearly completely clastic (class A) to highly cemented (class C) breccias in which the remaining clasts are completely surrounded by interstitial, shock-melted material. We conclude that this interstitial material formed by shock melting in the porous regolith. In general, the abundances of solar-wind-implanted ⁴He and ²⁰Ne are inversely correlated with the abundance of interstitial, shock-melted, feldspathic material. Chondrites with the highest abundance of interstitial, melted material (class C) experienced the highest shock pressures and temperatures and suffered the most extensive degassing. It is this interstitial, feldspathic melt that lithifies and cements the breccias together; those breccias with very little interstitial melt (class A) are the most porous and least consolidated.     

Earthquake strong motion simulated by stress drop models

Shallow strike slip earthquakes on vertical faults are modelled as two-dimensional antiplane strain ruptures in a uniformly prestressed homogeneous halfspace. Behind the rupture front, which is specified, the stress drops to a lower value. The elastodynamic boundary value problem is solved with a finite difference method. Several cases are studied, which include symmetric and one-directional rupture propagation, surface faulting, multiple events, variable rupture velocity, sticking and rebreaking of the fault plane. The time function of displacement, velocity and acceleration are interpreted as signals generated by events in the focus, namely starting, stopping and breaking through the surface of the rupture. The model explains peak velocity and peak acceleration in the near field of M5.5–6 earthquakes; which are typically about 0.2 m/s and 5 m/s² at 10 km epicentral distance, if the rupture velocity is close to the shear wave velocity. Sticking of the fault does not alter the accelerograms significantly, but it increases the seismic moment in simple events and decreases it in multiple events.Contribution No. 226, Geophysical Institute, University of Karlsruhe.     

Two Experimental Methods to Determine the Speciation of Cadmium in Sediment from the River Neckar

The binding forms of Cd to an anaerobic sediment of low sulfide content from Lauffen reservoir (River Neckar, Germany) were studied using two different approaches, i. e. sequential extraction (modified from published protocols) and titrimetric study of the pH-dependent Cd release. Thermodynamic equilibrium calculations were applied to calculate both the release pattern of Cd during the titrations and the speciation of Cd within the single fractions of the extraction protocol. The calculations were based on measured sediment parameters such as hydrous ferric oxide (HFO), acid volatile sulfide, carbonate content and total Cd content, and the extractants (oxalate, acid etc.) used. The results of the two independent approaches coincided well in that they both assigned more than two thirds of the total Cd content to be adsorbed to organic matter. Cd bound as CdS is of little importance. Sequential extraction after a 3-month oxidation period at pH 7 revealed a shift of Cd from being mainly bound in stronger surface complexes with organic matter to being mainly bound in weaker surface complexes with organic matter and HFO, and thus becoming more bioavailable. This study suggests that the use of sequential extraction although being frequently criticized due to its operational character can be used to determine binding forms of metal ions if they are accompanied by 1) careful supporting experiments, 2) analysis of important sediment parameters, and 3) the use of thermodynamic equlibrium models which can help to understand Cd speciation within the extraction fractions.