Metasomatism and melting history of a Variscan lithospheric mantle domain: evidence from the Puy Beaunit xenoliths (French Massif Central)

Mantle xenoliths from Puy Beaunit (French Massif Central) are compositionally varied, ranging from relatively fertile spinel lherzolites to refractory spinel dunites. Fertile peridotites have registered a modal (amphibole-bearing lherzolites) and cryptic metasomatic event that took place before the last Permian (257 Ma) melting episode. Depletion processes have been constrained by chemical modelling: the depletion is related to different degrees of partial melting, but two major melt extraction episodes are needed to explain the range of major element composition. The second event was responsible for the local large-scale dunitification of former residues. The first melting event (F25%) and metasomatic enrichment are attributed to an ancient fluid and/or liquid infiltration that could be related to a pre-Variscan regional subduction (located to the north of the Beaunit area). Texture acquisition and major deformation of the mantle xenoliths were sub-contemporaneous of the subduction and would result from lithospheric delamination. The second melting event (F17%) produced high-Mg basalts with calc-alkaline trace element signature that gave rise to the Permian underplating episode recognised in western Europe.     

Tethyan-to-boreal correlation in the Kimmeridgian using high-resolution sequence stratigraphy (Vocontian Basin,Swiss Jura,Boulonnais, Dorset)

Ammonite biostratigraphy plays a central role in the definition of Jurassic stratigraphy. Nevertheless, the strong provincialism of European ammonite species during the Kimmeridgian is a long-standing problem in correlation attempts between the boreal and Tethyan faunal realms. Moreover, the sequence-stratigraphic interpretations for northern and southern Europe given in the Jurassic chronostratigraphic chart of Hardenbol et al. in SEPM Publ. 60 (chart) (1998) are different. The present study aims to resolve this correlation problem in order to better understand the connections between the boreal and the Tethyan realms during the Kimmeridgian. A sedimentological and high-resolution sequence-stratigraphic interpretation is presented for two unpublished sections (Cras d’Hermont and Roche de Mars) in the northern Swiss Jura, where recently discovered ammonites display both boreal and Tethyan influences. Then, these sections are correlated with the same time interval in the central Swiss Jura and Vocontian Basin, which belong to the Tethyan realm. Lastly, a long-distance transect is constructed between the Vocontian Basin, Swiss Jura, northern France, and southern England, the last two areas being part of the sub-boreal realm. The main results of this work are that: (1) third-order depositional sequences, and also higher-frequency sequences, can be correlated from the Tethyan to the boreal realm; (2) the sequence-stratigraphic interpretation given by Hardenbol et al. in SEPM Publ 60 (chart) (1998) for northern Europe seems to be accurate and agrees with the sequence-stratigraphic framework established in the Swiss Jura; (3) the Late Kimmeridgian of the Swiss Jura displays boreal influences; (4) integrated high-resolution sequence-stratigraphic and cyclostratigraphic studies are a valuable approach for bridging the correlation gap between northern and southern Europe.     

Nouvelle interprétation structurale de la « faille Nord- Pyrénéenne » en vallée d'Aspe (Pyrénées-Atlantiques). Remise en question d'un plutonisme ophitique danien dans le secteur de Bedous

In the Aspe Valley (western Pyrenees), the Europe/Iberia boundary corresponds to a complex fracturing zone, called the ‘Bielle–Accous Wrench-Faulting Corridor’, which represents the classical ‘North-Pyrenean Fault’. Located between the High Primary Range and the North-Pyrenean Zone, the BAWC shows different south-verging sheets mainly composed of Triassic materials. The Bedous ophite, associated with Muschelkalk and Keuper sediments, is also Triassic in age and involved in the same Pyrenean thrusting structures. So, contrary to a recent interpretation, this magmatic rock cannot be related to a supposed Danian plutonism inducing metamorphic processes in the surrounding Mesozoic formations. To cite this article: J. Canérot et al., C. R. Geoscience 336 (2004).     

Mise en évidence d'un nouveau front de chevauchement dans l'Atlas tunisien oriental de Tunisie par sismique réflexion. Contexte structural régional et rôle du Trias salifère

Structural interpretations of newly acquired seismic lines in northeastern Tunisia allow us to highlight a new thrust front for the Atlasic range of Tunisia, in contrast to the previously Zaghouan fault thrust Dorsale zone. This new thrust front takes place on weakness tectonic zones, materialized by inherited faults anchored on the pre-Triassic basement. This front seems to be a paleogeographic trend controlling structural style and basin fill with a synsedimentary activity. The front is expressed by reverse faults, thrust faults, back thrusting, and decollement structures. To cite this article: S. Khomsi et al., C. R. Geoscience 336 (2004).     

The state of the environment in Mexico

The present work evaluates the state of the environment in Mexico based on indicators of the present status of the country’s natural resource management, social and economical conditions and anthropogenic modifications. The Mexican environment is interpreted as a spatially open system having a historical character that is essentially determined by the continual interaction between nature, society and economy. The landscape approach is followed, considering as units of territorial analysis each one of the 145 biophysical environmental units included in the national physiographic regionalization. The assessment of 16 indicators for each biophysical environmental unit was made considering their regional environmental integrity problems, the degree of disarticulation of their structure and function, and the alteration of their territorial structure, all of which determine whether or not they accomplish their environmental functions and achieve environmental stability. The classification of the state of the environment included 5 categories in 8 combinations represented in the map of the state of the environment in Mexico for the year 2008. The map shows that nearly 47.10% of the country’s surface has an environmental status ranging between unstable and critical, the problematic areas being mostly concentrated in the southeast and center of the national territory.     

3D alluvial aquifer reconstruction in polluted areas by means of GPR (Sabiñánigo,N Spain)

Assumptions of simple geometries for alluvial deposits (related to main rivers) can preclude determination of complexities that are revealed as fundamental controls in underground flow. Although subhorizontal contacts between alluvial and substratum materials are expected, previous sedimentary or erosional processes can result in irregular geometries, only accessible through detailed analysis. The studied case presents the 3D reconstruction of a Quaternary terrace in the proximities of Sabiñánigo (Southern Pyrenees, Northeastern Spain), lying on homogeneous Eocene marls. The studied area is located in an industrialized area supporting strongly pollutant chemical industry (chlorinated pesticides) for the past 50 years. The objective of the study was to constrain the groundwater pathway along the area to subsequently analyze leakage of chemicals to the water table. In order to reveal preferred flow paths, a detailed characterization of the internal structure of the alluvial deposits (0.5–13 m thick) and their relations with the Tertiary substratum was carried out by means of ground penetrating radar (GPR, 50 and 100 MHz antennas). The obtained models permit identifying several topographic highs in the alluvial/substratum contact, determining preferred pathways in water flow, favoring particular conditions associated with low levels of the water table. The presented results support the interest of application of GPR surveys in order to characterize the groundwater pathways in expected homogeneous areas and their importance in order to establish the contaminant surveillance network.     

Halocinèse précoce associée au rifting jurassique dans l'Atlas central de Tunisie (région de Majoura–El Hfay)

Seismic and sequence stratigraphy analyses, petroleum-well control and surface data studies of the Majoura–El Hfay region in the Central Atlas of Tunisia had led to identify and calibrate Jurassic seismic horizons. Seismic stratigraphic sections, seismic tectonics analyses, isochron and isopach mapping of Jurassic sequences show a differentiated structuring of platform and depocentre blocks limited by deep-seated NE–SW, north–south east–west and NW–SE faults intruded by Upper Triassic salt. The early salt migration seems to have started by the platform fracturing during the Lower Liassic rifting event. These movements are fossilized by thickness variations of Jurassic horizons, aggrading and retrograding onlap and toplap structures between subsiding rim-syncline gutters and high platform flanks intruded by salt pillows and domes. The salt migration is also attested by Middle and Upper Jurassic space depocentre migrations. Around the Majoura–El Hfay study blocks bounded by master faults, Triassic salt have pierced the Cretaceous and Tertiary sedimentary cover in a salt diapir extrusion and salt wall structures. To cite this article: D. Tanfous Amri et al., C. R. Geoscience 337 (2005).     

Inverse problem in hydrogeology

The state of the groundwater inverse problem is synthesized. Emphasis is placed on aquifer characterization, where modelers have to deal with conceptual model uncertainty (notably spatial and temporal variability), scale dependence, many types of unknown parameters (transmissivity, recharge, boundary conditions, etc.), nonlinearity, and often low sensitivity of state variables (typically heads and concentrations) to aquifer properties. Because of these difficulties, calibration cannot be separated from the modeling process, as it is sometimes done in other fields. Instead, it should be viewed as one step in the process of understanding aquifer behavior. In fact, it is shown that actual parameter estimation methods do not differ from each other in the essence, though they may differ in the computational details. It is argued that there is ample room for improvement in groundwater inversion: development of user-friendly codes, accommodation of variability through geostatistics, incorporation of geological information and different types of data (temperature, occurrence and concentration of isotopes, age, etc.), proper accounting of uncertainty, etc. Despite this, even with existing codes, automatic calibration facilitates enormously the task of modeling. Therefore, it is contended that its use should become standard practice.

---

Resumen Se sintetiza el estado del problema inverso en aguas subterráneas. El énfasis se ubica en la caracterización de acuíferos, donde los modeladores tienen que enfrentar la incertidumbre del modelo conceptual (principalmente variabilidad temporal y espacial), dependencia de escala, muchos tipos de parámetros desconocidos (transmisividad, recarga, condiciones limitantes, etc), no linealidad, y frecuentemente baja sensibilidad de variables de estado (típicamente presiones y concentraciones) a las propiedades del acuífero. Debido a estas dificultades, no puede separarse la calibración de los procesos de modelado, como frecuentemente se hace en otros campos. En su lugar, debe de visualizarse como un paso en el proceso de entendimiento del comportamiento del acuífero. En realidad, se muestra que los métodos reales de estimación de parámetros no difieren uno del otro en lo esencial, aunque sí pueden diferir en los detalles computacionales. Se discute que existe amplio espacio para la mejora del problema inverso en aguas subterráneas: desarrollo de códigos amigables al usuario, acomodamiento de variabilidad a través de geoestadística, incorporación de información geológica y diferentes tipos de datos (temperatura, presencia y concentración de isótopos, edad, etc), explicación apropiada de incertidumbre, etc. A pesar de esto, aún con los códigos existentes, la calibración automática facilita enormemente la tarea de modelado. Por lo tanto, se sostiene que su uso debería de convertirse en práctica standard.

---

Résumé Létat du problème inverse des eaux souterraines est synthétisé. Laccent est placé sur la caractérisation de laquifère, où les modélisateurs doivent jouer avec lincertitude des modèles conceptuels (notamment la variabilité spatiale et temporelle), les facteurs déchelle, plusieurs inconnues sur différents paramètres (transmissivité, recharge, conditions aux limites, etc.), la non linéarité, et souvent la sensibilité de plusieurs variables détat (charges hydrauliques, concentrations) des propriétés de laquifère. A cause de ces difficultés, le calibrage ne peut être séparé du processus de modélisation, comme cest le cas dans dautres cas de figure. Par ailleurs, il peut être vu comme une des étapes dans le processus de détermination du comportement de laquifère. Il est montré que les méthodes dévaluation des paramètres actuels ne diffèrent pas si ce nest dans les détails des calculs informatiques. Il est montré quil existe une large panoplie de techniques d ‹inversion : codes de calcul utilisables par tout-un-chacun, accommodation de la variabilité via la géostatistique, incorporation dinformations géologiques et de différents types de données (température, occurrence, concentration en isotopes, âge, etc.), détermination de lincertitude. Vu ces développements, la calibration automatique facilite énormément la modélisation. Par ailleurs, il est souhaitable que son utilisation devienne une pratique standardisée.