GOCE gravitational gradients along the orbit

GOCE is ESA’s gravity field mission and the first satellite ever that measures gravitational gradients in space, that is, the second spatial derivatives of the Earth’s gravitational potential. The goal is to determine the Earth’s mean gravitational field with unprecedented accuracy at spatial resolutions down to 100 km. GOCE carries a gravity gradiometer that allows deriving the gravitational gradients with very high precision to achieve this goal. There are two types of GOCE Level 2 gravitational gradients (GGs) along the orbit: the gravitational gradients in the gradiometer reference frame (GRF) and the gravitational gradients in the local north oriented frame (LNOF) derived from the GGs in the GRF by point-wise rotation. Because the V _XX , V _YY , V _ZZ and V _XZ are much more accurate than V _XY and V _YZ , and because the error of the accurate GGs increases for low frequencies, the rotation requires that part of the measured GG signal is replaced by model signal. However, the actual quality of the gradients in GRF and LNOF needs to be assessed. We analysed the outliers in the GGs, validated the GGs in the GRF using independent gravity field information and compared their assessed error with the requirements. In addition, we compared the GGs in the LNOF with state-of-the-art global gravity field models and determined the model contribution to the rotated GGs. We found that the percentage of detected outliers is below 0.1% for all GGs, and external gravity data confirm that the GG scale factors do not differ from one down to the 10⁻³ level. Furthermore, we found that the error of V _XX and V _YY is approximately at the level of the requirement on the gravitational gradient trace, whereas the V _ZZ error is a factor of 2–3 above the requirement for higher frequencies. We show that the model contribution in the rotated GGs is 2–35% dependent on the gravitational gradient. Finally, we found that GOCE gravitational gradients and gradients derived from EIGEN-5C and EGM2008 are consistent over the oceans, but that over the continents the consistency may be less, especially in areas with poor terrestrial gravity data. All in all, our analyses show that the quality of the GOCE gravitational gradients is good and that with this type of data valuable new gravity field information is obtained.     

Toothed whales in the northwestern Mediterranean: insight into their feeding ecology using chemical tracers

Risso’s dolphins, pilot whales and sperm whales rarely strand in the northwestern Mediterranean. Thus, their feeding ecology, through the analysis of stomach contents, is poorly known. The aim of this study was to gain further insight into the segregation/superposition of the diet and habitat of Risso’s dolphins, pilot whales and sperm whales using chemical tracers, namely, stable isotopes (δ¹³C, δ¹⁵N) and organochlorines. Significantly different δ¹⁵N values were obtained in Risso’s dolphins (11.7 ± 0.7‰), sperm whales (10.8 ± 0.3‰) and pilot whales (9.8 ± 0.3‰), revealing different trophic levels. These differences are presumably due to various proportions of Histioteuthidae cephalopods in each toothed whale’s diet. Similar δ¹³C contents between species indicated long-term habitat superposition or corroborated important seasonal migrations. Lower congener 180 concentrations (8.20 vs. 21.73 μg.g⁻¹ lw) and higher tDDT/tPCB ratios (0.93 vs. 0.42) were observed in sperm whales compared with Risso’s dolphins and may indicate wider migrations for the former. Therefore, competition between these species seems to depend on different trophic levels and migration patterns.     

Sedimentology of a wreck: the Rainbow Warrior revisited

The wreck of the Rainbow Warrior, a 40-m ship sunk on 12 December 1987 in Matauri Bay (34° 59′ S, 173° 56′ E), Cavalli Islands, northeastern New Zealand, offers an opportunity to investigate the impact of artificial substrate on temperate carbonate sedimentation. Surface sediment samples showed no significant textural or compositional difference between sediments near the wreck and those far from it. The large and diverse carbonate-producing community resident on the wreck (dominated by bryozoans, corals and sponges) has not had a measurable influence on adjacent bottom sediments (dominated by bivalves and barnacles), even after 21 years. It is likely that carbonate production on the Rainbow Warrior is insufficient to leave any sedimentary record over the potential lifetime of the wreck on the seafloor, which informs our understanding of the long-term impacts of shipwrecks (and other artificial substrata) on the local benthic environment in shallow temperate ecosystems.     

3D resistivity gridding of large AEM datasets: A step toward enhanced geological interpretation

We develop a technique allowing 3D gridding of large sets of 1D resistivity models obtained after inversion of extensive airborne EM surveys. The method is based on the assumption of a layered-earth model. 2D kriging is used for interpolation of geophysical model parameters and their corresponding uncertainties. The 3D grid is created from the interpolated data, its structure accurately follows the geophysical model, providing a lightweight file for a good rendering. Propagation of errors is tracked through the quantification of uncertainties from both inversion and interpolation procedures. The 3D grid is exported to a portable standard, which allows flexible visualization and volumetric computations, and improves interpretation. The method is validated and illustrated by a case-study on Santa Cruz Island, in the Galapagos Archipelago.     

Microbialite development patterns in the last deglacial reefs from Tahiti (French Polynesia; IODP Expedition #310): Implications on reef framework architecture

The widespread occurrence of microbialites in the last deglacial reef frameworks (16–6 Ka BP) implies that the accurate study of their development patterns is of prime importance to unravel the evolution of reef architecture through time and to reconstruct the reef response to sea-level variations and environmental changes.The present study is based on the sedimentological and chronological analysis (¹⁴C AMS dating) of drill cores obtained during the IODP Expedition #310 “Tahiti Sea Level” on the successive terraces which typify the modern reef slopes from Tahiti. It provides a comprehensive data base to investigate the microbialite growth patterns (i.e. growth rates and habitats), to analyze their roles in reef frameworks and to reconstruct the evolution of the reef framework architecture during sea-level rise.The last deglacial reefs from Tahiti are composed of two distinctive biological communities: (1) the coralgal communities including seven assemblages characterized by various growth forms (branching, robust branching, massive, tabular and encrusting) that form the initial frameworks and (2) the microbial communities developed in the primary cavities of those frameworks, a few meters (1.5 to 6 m) below the living coral reef surface, where they heavily encrusted the coralgal assemblages to form microbialite crusts. The dating results demonstrate the occurrence of two distinctive generations of microbialites: the “reefal microbialites” which developed a few hundred years after coralgal communities in shallow-water environments, whereas the “slope microbialites” grew a few thousands of years later in significantly deeper water conditions after the demise of coralgal communities.The development of microbialites was controlled by the volume and the shape of the primary cavities of the initial reef frameworks determined by the morphology and the packing of coral colonies. The most widespread microbialite development occurred in frameworks dominated by branching, thin encrusting, tabular and robust branching coral colonies which built loose and open frameworks typified by a high porosity (> 50%). In contrast, their growth was minimal in compact coral frameworks formed by massive and thick encrusting corals where primary cavities yielded a low porosity (~ 30%) and could not host a significant microbialite expansion.     

Globalizing urban resilience

Urban resilience, a new urban development and governance agenda, is being rolled out from the top down by a network of public, private, non-profit sector actors forming a global urban resilience complex: producing norms that circulate globally, creating assessment tools rendering urban resilience technical and managerial, and commodifying urban resilience such that private sector involvement becomes integral to urban development planning and governance. The Rockefeller Foundation's 100 Resilience Cities Program is at the center of this complex, working with the World Bank, global consultants, NGOs, and private sector service providers to enroll cities, develop and circulate urban resilience assessment tools, and create a market catalyzed by the notion of a resilience dividend. Notwithstanding the claim of this program being open and inclusive, aspects of its initial operationalization in Jakarta suggest that urban resilience assessment tools preempt alternative understandings of urban resilience and marginalizing voices of the city's most vulnerable populations.     

Sediment trapping by a tree belt: processes and consequences for sediment delivery

Restoring belts of perennial vegetation in landscapes is widely recognized as a measure of improving landscape function. While there have been many studies of the transport of pollutants through grass filter strips, few have addressed sediment related processes through restored tree belts. In order to identify these processes and quantify their relative contribution to sediment trapping, a series of rainfall simulations was conducted on a 600 m² hillslope comprising a pasture upslope of a 15 year old tree belt. Although the simulated events were extreme (average recurrence intervals ～10 and 50 yr), the trapping efficiency of the tree belt was very high: at least 94% of the total mass of sediments was captured. All the size fractions were trapped with a minimum Sediment Trapping Ratio (STR) of 91% for the medium‐sized fragments. Fractions < 1·3 µm and > 182 µm were totally captured (STR = 100%). Through the joint analysis of sediment budgets and soil surface conditions, we identified different trapping processes. The main trapping process is the sedimentation (at least 62% of trapped sediment mass) with deposits in the backwater and as micro‐terraces within the tree belt. Modelling results show that the coarsest size fractions above 75 µm are preferentially deposited. Joint infiltration of water and sediments has also been noticed, however, this process alone cannot explain the selective trapping of the finest fractions. We suggest that the finest fractions transported by the overland flow may be trapped by adsorption on the abundant litter present within the tree belt. Copyright © 2008 John Wiley & Sons, Ltd.