Shallow Water Dissipation Processes for Wind Waves off the Mackenzie Delta

This study focuses on two physical processes for waves in shallow waters off the Mackenzie Delta: bottom friction and depth-induced breaking terms. We use field observations of winds and waves, the state-of-the-art Simulating Waves Nearshore (SWAN) model, and reanalysis wind and wave data. The two field observation periods are an August 2008 field experiment, during which in situ field data were collected, and an Arctic storm when data were recorded by buoy measurements from 4 to 6 August 1991. Wind and wave development processes are analyzed during these two periods with comparisons to observed winds and waves. Our analyses show that bottom friction is the main shallow water physical process during the August 2008 field experiment, whereas depth-induced breaking is the dominant shallow water physical process during the 4–6 August 1991 storm, in conjunction with the effects of bottom friction. The SWAN wave model is used to investigate the shallow water physical processes during these two observation periods. Simulation results indicate that the model can give reasonable results, with an appropriate Collins coefficient of 0.006 and a wave breaking parameter of 0.55 to represent bottom friction and depth-induced breaking physics, respectively.

RÉSUMÉ?[Traduit par la rédaction] Cette étude porte sur deux processus physiques concernant les vagues dans les eaux peu profondes au large du delta du Mackenzie : les termes du frottement contre le fond et du déferlement lié à la profondeur. Nous utilisons des observations du vent et des vagues, le modèle d'avant-garde SWAN (Simulating Waves Nearshore) et des données de vent et de vagues réanalysées. Les deux périodes d'observations sont une expérience sur le terrain réalisée en août 2008, au cours de laquelle des données de terrain ont été recueillies, et une tempête arctique lors de laquelle des mesures faites par bouée du 4 au 6 août 1991 ont été enregistrées. Nous analysons les processus dévolution du vent et des vagues durant ces deux périodes, et comparons avec le vent et les vagues observées. Nos analyses montrent que le frottement contre le fond est le processus physique en eaux peu profondes le plus important durant l'expérience sur le terrain d'août 2008, alors que le déferlement lié à la profondeur est le processus physique en eaux peu profondes dominant pendant la tempête arctique du 4 au 6 août 1991, en combinaison avec les effets du frottement contre le fond. Nous nous servons du modèle de vagues SWAN pour étudier les processus physiques en eaux peu profondes durant ces deux périodes d'observations. Les résultats des simulations indiquent que le modèle peut donner des résultats raisonnables, avec un coefficient de Collins approprié de 0,006 et un paramètre de déferlement de 0,55 pour représenter la physique du frottement contre le fond et du déferlement lié à la profondeur, respectivement.     

Geology and Gold Mineralization in the Pan-African Rocks of the Adola Area, Southern Ethiopia

Primary and placer gold deposits are mined from the Pan-African Adola volcano-sedimentary sequence, in southern Ethiopia. Two major mineralized belts can be recognized: the Megado (‘Gold Belt’) and the Kenticha Belts. The Kenticha Belt is also known for its rare metal mineralization. Extensive exploration of the area resulted in two most important primary gold deposits of Lega Dembi and Sakaro. The primary gold deposits are classified into four classes based on their geological setting:

- auriferous veins, lodes, stockworks and silicified zones disseminated in schistose rocks

- gold associated with quartzite

- gold mineralization confined to conglomerates and meta-arkoses

- auriferous quartz veins in high grade gneiss rocks

This classification provides a useful guide for future exploration programme     

Silurian Sedimentation in the South Qilian Belt: Arc-Continent Collision-related Deposition in the NE Tibet Plateau?

The South Qilian belt mainly comprises an early Paleozoic arc-ophiolite complex, accretionary prism, microcontinental block, and foreland basin. These elements represent accretion-collision during Cambrian to Silurian time in response to closure of the Proto-Tethyan Ocean in the NE of the present-day Tibet Plateau. Closure of the Proto-Tethyan Ocean between the Central Qilian block and the Oulongbuluke block and the associated collision took place from NE to SW in a zipper-like style. Sediment w...     

Spatial variability of factors influencing coastal change in the Western Canadian Arctic

Coastal change in the western Canadian Arctic is influenced by coastal morphology, relative sea-level trend and sea-ice and storm climates. The spatial variability of these factors tends to follow general east–west trends suggesting similar trends in coastal erosion hazard, processes and rates of coastal change. The spatial variability in the causes of coastal change is examined in the communities of Tuktoyaktuk, Sachs Harbour, Holman and Kugluktuk.     

Internal constitution and evolution of the moon

The composition, structure and evolution of the moon's interior are narrowly constrained by a large assortment of physical and chemical data. Models of the thermal evolution of the moon that fit the chronology of igneous activity on the lunar surface, the stress history of the lunar lithosphere implied by the presence of mascons, and the surface concentrations of radioactive elements, involve extensive differentiation early in lunar history. This differentiation may be the result of rapid accretion and large-scale melting or of primary chemical layering during accretion; differences in present-day temperatures for these two possibilities are significant only in the inner 1000 km of the moon and may not be resolvable. If the Apollo 15 heat-flow result is representative of the moon, the average uranium concentration in the moon is 0.05–0.08 p.p.m.Density models for the moon, including the effects of temperature and pressure, can be made to satisfy the mass and moment of inertia of the moon and the presence of a low-density crust inferred from seismic refraction studies only if the lunar mantle is chemically or mineralogically inhomogeneous. The upper mantle must exceed the density of the lower mantle at similar conditions by at least 5%. The average mantle density is that of a pyroxenite or olivine pyroxenite, though the density of the upper mantle may exceed 3.5 g/cm³. The density of the lower mantle is less than that of the combined crust and upper mantle at similar temperature and pressure, thus reinforcing arguments for early moon-wide differentiation of both major and minor elements. The suggested density inversion is gravitationally unstable and implies stresses in the mantle 2–5 times those associated with the lunar gravitational field, a difficulty that can be explained or avoided by: (1) adopting lower values for the moment of inertia and/or crustal thickness, or (2) postulating that the strength of the lower mantle increases with depth or with time, either of which is possible for certain combinations of composition and thermal evolution.A small iron-rich core in the moon cannot be excluded by the moon's mass and moment of inertia. If such a core were molten at the time lunar surface rocks acquired remanent magnetization, then thermal-history models with initially cold interiors strongly depleted in radioactive heat sources as a primary accretional feature must be excluded. Further, the presence of ～||pre|40 K in a FeFeS core could significantly alter the thermal evolution and estimated present-day temperatures of the deep lunar interior.     

Geochemistry of the Pegmatitic Rocks and Minerals in the Kenticha Belt, Southern Ethiopia: Implication to Geological Setting

Trace element distribution patterns are reported for whole rocks (granites, aplites, greisens, pegmatites, alaskites) and minerals from the Kenticha pegmatite field. The data shed light on the evolution, regional and local zonal pattern of the granitepegmatites and associated mineralization in the Kenticha belt. The complex mineralization of commercial concentrations of Ta, Nb, Hf, Zr, REE, U and Th is related to Be, Li, Cs, Rbbearing zones of pegmatites and is structurally controlled. Whole rock chemical signatures of the suite of felsic rocks of the Kenticha belt are predominantly similar to those generated by subduction in modern magmatic arcs and indicate a mantle derivation. Columbotantalite concentrates extracted from the pegmatitic ores represent the basic raw materials from which a number of possible byproducts can be recovered.     

Traditional Irrigation Management in Betmera-Hiwane, Ethiopia： The Main Peculiarities for the Persistence of Irrigation Practices

Introduction Tigray, the northern region of Ethiopia (Figure 1), is located between 12°20′~14°30′N and 36° ~ 41°30′E. It is dominated by undulating topo- graphy with many mountains, plateaus, hills, depressions and limited flat lands. The elevation     

Decoding dispossession: Eviction and urban regeneration in Johannesburg's dark buildings

In January 2012 the residents of an inner‐city tenement building in Doornfontein, Johannesburg, were evicted on a court order. The building was situated in a post‐industrial neighbourhood in which thousands of South Africans and foreign nationals, many blind or disabled, live in unlawfully occupied buildings without access to water, basic sanitation, electricity and waste management services. Such buildings are known in policy discourse as ‘bad buildings’, and informally as ‘dark buildings’, invoking both a sense of developmental failure and spiritual insecurity. In this paper I analyse how urban renewal policies created social divisions and alliances not only among the residents of Chambers, which were channelled along nationalist lines, but also between the able‐bodied and disabled, and produced new social alliances. In particular, I document how a group of blind Zimbabweans experienced threats of violence and accusations of betrayal, as they were offered alternate accommodation by the evicting company because of their disability. I argue here that the pressures of private‐sector housing developments intersected with the insecurities and divisions of inner‐city social spaces and also fostered new alliances. Following the work of Deleuze and Guattari, I invoke the concept of ‘decoding dispossession’, proposing that ongoing evictions and dispossessions are characterized by simultaneous movements of ‘decoding and deterritorialization’ and ‘overcoding‐reterritorialization’.     

The Arctic Coastal Dynamics Database: A New Classification Scheme and Statistics on Arctic Permafrost Coastlines

Arctic permafrost coasts are sensitive to changing climate. The lengthening open water season and the increasing open water area are likely to induce greater erosion and threaten community and industry infrastructure as well as dramatically change nutrient pathways in the near-shore zone. The shallow, mediterranean Arctic Ocean is likely to be strongly affected by changes in currently poorly observed arctic coastal dynamics. We present a geomorphological classification scheme for the arctic coast, with 101,447?km of coastline in 1,315 segments. The average rate of erosion for the arctic coast is 0.5?m? year^?1 with high local and regional variability. Highest rates are observed in the Laptev, East Siberian, and Beaufort Seas. Strong spatial variability in associated database bluff height, ground carbon and ice content, and coastline movement highlights the need to estimate the relative importance of shifting coastal fluxes to the Arctic Ocean at multiple spatial scales.     

Mitobs: A seismometer system for ocean-bottom earthquake studies

The MIT ocean-bottom seismometer is a free-fall, pop-up instrument capable of recording three components of seismic data on the sea floor for periods of at least one month. Data are recorded in digital format on a specially designed magnetic tape recorder. An event recording scheme and semiconductor memories assure both efficient data storage and preservation of first motion information. Sensors and recording electronics are housed in a cylindrical pressure vessel, which sits vertically atop an expendable base plate on the ocean bottom. Attached to the pressure case are three glass spheres for buoyancy. After a pre-set time interval, a motor-driven mechanical latch release frees the instrument to float to the ocean surface for recovery.