Submarine groundwater discharge revealed by aerial thermal infrared imagery: a case study on Jeju Island,Korea

Submarine groundwater discharge (SGD) is a global phenomenon that carries large volumes of groundwater and dissolved chemical species such as nutrient, metals, and organic compounds to coastal zones. We report the influence of SGD on the coastal waters of Jeju Island, Korea, using high‐resolution aerial thermal infrared (TIR) mapping techniques and field investigations. An aircraft‐based system was implemented using a cost‐effective TIR camera for aerial TIR mapping. Ground‐based calibrations and system integration with GPS/IMU (global positioning system/inertial measurement unit) were performed for the aerial systems. The aerial surveys showed distinct low‐temperature signatures of SGD along the coasts of Jeju Island, revealing large groundwater inputs from the coastal aquifers to the ocean. Multiple aerial surveys over a range of seasons and tidal stages revealed that SGD rates dynamically affect the sea surface temperature (SST) of the coastal zone. The in‐situ measurements supported that SGD has a substantial influence on the coastal water chemistry as well as SST. Our observations highlight the extent to which aerial‐based TIR mapping can serve as a powerful tool for studying SGD and other coastal processes. Copyright © 2016 John Wiley & Sons, Ltd.     

Performance of activated carbon-impregnated cellulose filters for indoor VOCs and dust control

An activated carbon-impregnated cellulose filter was fabricated, and the capacity to remove dust and volatile organic compounds was evaluated in a laboratory. The adsorption capacities for benzene, toluene, ethyl benzene and m-xylene gases were compared by an adsorption isotherm test conducted as a preliminary test, showing that m-xylene and benzene were the most and least favorable for adsorption onto activated carbon, respectively. Cellulose filters were made with four levels of activated carbon contents, and dust removal was performed with all of the filters showing 99 % and higher efficiencies stable with a small variation during the experiment. Activated carbon content of 5 g in the unit filter area (125 g/m²) was found optimum for benzene, toluene, ethylbenzene and m-xylene removal, as it appeared that higher than 5 g activated carbon content was unnecessary for the improvement of its capacity. With increasing benzene, toluene, ethylbenzene and m-xylene loading, the highest removal rates were determined as 0.33–0.37 mg/cm² s for as short as 0.0046 s of air filter residence time. The rapid removal was possible because of the high surface area of the activated carbon-impregnated cellulose filter provided by powdered activated carbon, which is distinguished from the granular form in conventional activated carbon towers. As fixed within a cellulose scaffolding structure, the powdered activated carbon performed excellent benzene, toluene, ethylbenzene, and m-xylene adsorption (98.9–100 %), and at the same time, particular matters were removed in average 99.7 % efficiency after being filtered through the cellulose filter sheet.     

Vertical distribution of giant jellyfish, <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> using acoustics and optics

Nemopilema nomurai jellyfish, which are believed to complete their development in the East China Sea, have started migrating into the Yellow Sea in recent years. We obtained biomass estimates of this species in the Yellow Sea using bottom trawl fishing gear and sighting surveys over a 5-year period. These methods are effective for obtaining N. nomurai jellyfish density estimates and information about the community distribution near the bottom or surface of the sea. To verify the vertical distributions of giant jellyfish between, we used hydroacoustic equipment, including an optical stereo camera system attached to a towed sledge and an echo counting method with scientific echosounder system. Acoustic and optical data were collected while the vessel moved at 3 knots, from which the distribution and density of N. nomurai jellyfish were analyzed. Subsequently, the camera system was towed from a 7 m mean depth to sea level, with the detection range of the acoustic system extending from an 8 m depth to the bottom surface. The optical and acoustic methods indicated the presence of vertical distribution of 0.11³ (inds/m³) and 0.064 (inds/m3), respectively. However, the vertical distribution indicated that around 93% of individuals occurred at a depth range of 10–40 m; thus, a 2.4-fold greater density was estimated by acoustic echo counting compared to the optical method.     

Geotechnical design parameter evaluation using the alluvial plain characteristics in southeastern Iraq

Geotechnical construction is responsible for the overall stability of superstructures, and if there are design errors, the structure will be exposed to potential problems. Geotechnical design starts with the correct interpretation of the target ground. Southeastern Iraq is mainly comprised of an alluvial plain with diverse geological features, and, therefore, geotechnical design requires a detailed interpretation and understanding of the area. This paper reports on laboratory and field tests and in-depth analyses conducted on these alluvial plains. The results reveal that the upper layer of this area is highly over-consolidated. This may have been caused by the removal of overburden pressure as a result of glaciation and desiccation. The highly over-consolidated soils caused considerable sample disturbance by swelling the bored sample; this provided less reliable results. However, the cone penetration test was regarded as the most appropriate field assessment method for deriving sensible geotechnical design parameters. Despite its limitations in clayey soils, the standard penetration test provided results that matched well with previous observations due to the high penetration resistance of the highly over-consolidated ground. Down-hole tests and plate load tests were considered less reliable methods due to their limited applicability in this area. This study considers geographical features, laboratory methods, and empirical correlations from in situ tests, and, therefore, provides a well-summarized guideline to evaluate special geotechnical characteristics of the alluvial plain in southeastern Iraq.     

Changes in Fish Assemblages after Dike Construction in the Saemangeum Area

In the Saemangeum area, construction of a dike began in 1991 and was completed in 2006; desalination is currently being conducted. In order to investigate     

Acoustic Characteristic of Sailfin Sandfish (Arctoscopus japonicus) in Dokdo,Republic of Korea

The aim of this study is to determine the acoustic characteristics of sailfin sandfish over a wide frequency range. The acoustic survey was conducted in Fe     

Numerical simulation of nearshore circulation on field topography under random wave environment

In order to investigate surf zone hydrodynamics through two-dimensional numerical simulations of nearshore circulation under random wave environment, a nearshore circulation model, SHORECIRC, and a random wave model, SWAN, were combined and utilized. Using this combined model, a numerical simulation of the October 2, 1997 SandyDuck field experiment was performed. For this simulation, field topography and an input offshore spectrum were constructed using observed data sets synchronized with the experiment. The wave-breaking model in SWAN was modified by using breaker parameters varied according to bottom slope. The simulation results were compared with the experimental data, which revealed a well-developed longshore current, as well as with results using other combinations which were SHORECIRC and its original monochromatic wave-driver, and SHORECIRC and the default of SWAN. The results from the novel combined model agreed well with the experimental data. The results of the present simulation also indicate that alongshore field topography influences shear fluctuation of longshore currents.     

Characterization of Frequency and Aggregation of the Antarctic Krill (<Emphasis Type="Italic">Euphausia superba</Emphasis>) Using Acoustics

In this study, the dB difference and characteristics of krill swarms inhabiting Subarea 48.1, which includes the west and south of the South Shetland Island and the Elephant Island peripheries, were estimated to distinguish Antarctic krill, using acoustics. From April 13 to 24, 2016, acoustic data were collected along 24 survey lines using the frequencies 38 and 120 kHz, and middle trawling was performed at 7 stations. Using the difference between the dB values of two volume backscattering strength (Sv) frequencies (38 and 120 kHz), a clear acoustic distinction could be made between Antarctic krill (4.9 to 12.0 dB) and fish (?4.0 to ?0.2 dB). The distributions and mean Sv of krill swarms in the Elephant Island peripheries and south of South Shetland Island were higher than those in the west of South Shetland Island. The mean length/ height ratio of krill swarms in the west of the South Shetland Island (64.5) was higher than that in the south (35.9) and the Elephant Island peripheries (33.8), with the length of the aggregations exceeding their height. Most krill swarms were distributed between the surface layer (less than 10 m below sea level) and within 200 m of water depth. These results are expected to serve as baseline data for evaluating krill density and biomass by distinguishing them from fish, using acoustics.