The fall,recovery, and classification of the Park Forest meteorite

Abstract— On the night of March 26, 2003, a large meteorite broke up and fell upon the south suburbs of Chicago. The name Park Forest, for the village that is at the center of the strewnfield, has been approved by the nomenclature committee of the Meteoritical Society. Satellite data indicate that the bolide traveled from the southwest toward the northeast. The strewnfield has a southeast‐northwest trend; however, this is probably due to the effects of strong westerly winds at high altitudes. Its very low ⁵⁶Co and very high ⁶⁰Co activities indicate that Park Forest had a preatmospheric mass that was at least ～900 kg and could have been as large as ～7 times 10³ kg, of which only ～30 kg have been recovered. The average compositions of olivine and low‐Ca pyroxene, Fa_{24.7 ± 1.1} and Fs_{20.8 ± 0.7}, respectively, and its bulk oxygen isotopic composition, δ¹⁸O = +4.68%o, δ¹⁷O = +3.44%o, show that Park Forest is an L chondrite. The ferromagnesian minerals are well equilibrated, chondrules are easily recognized, and maskelynite is mostly ≤50 μm across. Based on these observations, we classify Park Forest as type 5. The meteorite has been strongly shocked, and based on the presence of maskelynite, mosaicism and planar deformation features in olivine, undulatory extinction in pyroxene, and glassy veins, the shock stage is S5. The meteorite is a monomict breccia, consisting of light‐colored, angular to rounded clasts in a very dark host. The light and dark lithologies have essentially identical mineral and oxygen isotopic compositions. Their striking difference in appearance is due to the presence of a fine, pervasive network of sulfide veins in the dark lithology, resulting in very short optical path lengths. The dark lithology probably formed from the light lithology in an impact that formed a sulfide‐rich melt and injected it into cracks.     

The Erbisberg drilling 2011: Implications for the structure and postimpact evolution of the inner ring of the Ries impact crater

The 26 km diameter Nördlinger Ries is a complex impact structure with a ring structure that resembles a peak ring. A first research drilling through this “inner crystalline ring” of the Ries was performed at the Erbisberg hill (SW Ries) to better understand the internal structure and lithology of this feature, and possibly reveal impact‐induced hydrothermal alteration. The drill core intersected the slope of a 22 m thick postimpact travertine mound, before entering 42 m of blocks and breccias of crystalline rocks excavated from the Variscan basement at >500 m depth. Weakly shocked gneiss blocks that show that shock pressure did not exceed 5 GPa occur above polymict lithic breccias of shock stage Ia (10–20 GPa), with planar fractures and planar deformation features (PDFs) in quartz. Only a narrow zone at 49.20–50.00 m core depth exhibits strong mosaicism in feldspar and {102} PDFs in quartz, which are indicative of shock stage Ib (20–35 GPa). Finally, 2 m of brecciated Keuper sediments at the base of the section point to an inverse layering of strata. While reverse grading of clast sizes in lithic breccias and gneiss blocks is consistent with lateral transport, the absence of diaplectic glass and melt products argues against dynamic overthrusting of material from a collapsing central peak, as seen in the much larger Chicxulub structure. Indeed, weakly shocked gneiss blocks are rather of local provenance (i.e., the transient crater wall), whereas moderately shocked polymict lithic breccias with geochemical composition and ⁸⁷Sr/⁸⁶Sr signature similar to Ries suevite were derived from a position closer to the impact center. Thus, the inner ring of the Ries is formed by moderately shocked polymict lithic breccias likely injected into the transient crater wall during the excavation stage and weakly shocked gneiss blocks of the collapsing transient crater wall that were emplaced during the modification stage. While the presence of an overturned flap is not evident from the Erbisberg drilling, a survey of all drillings at or near the inner ring point to inverted strata throughout its outer limb. Whether the central ring of the Ries represents remains of a collapsed central peak remains to be shown. Postimpact hydrothermal alteration along the Erbisberg section comprises chloritization, sulfide veinlets, and strong carbonatization. In addition, a narrow zone in the lower parts of the polymict lithic breccia sequence shows a positive Eu anomaly in its carbonate phase. The surface expression of this hydrothermal activity, i.e., the travertine mound, comprises subaerial as well as subaquatic growth phases. Intercalated lake sediments equivalent to the early parts of the evolution of the central crater basin succession confirm a persistent impact‐generated hydrothermal activity, although for less time than previously suggested.     

Knowledge gaps in our perceptual model of Great Britain's hydrology

There is a no lack of significant open questions in the field of hydrology. How will hydrological connectivity between freshwater bodies be altered by future human alterations to the hydrological cycle? Where does water go when it rains? Or what is the future space–time variability of flood and drought events? However, the answers to these questions will vary with location due to the specific and often poorly understood local boundary conditions and system properties that control the functional behaviour of a catchment or any other hydrologic control volume. We suggest that an open, shared and evolving perceptual model of a region's hydrology is critical to tailor our science questions, as it would be for any other study domain from the plot to the continental scale. In this opinion piece, we begin to discuss the elements of and point out some knowledge gaps in the perceptual model of the terrestrial water cycle of Great Britain. We discuss six major knowledge gaps and propose four key ways to reduce them. While the specific knowledge gaps in our perceptual model do not necessarily transfer to other places, we believe that the development of such perceptual models should be at the core of the debate for all hydrologic communities, and we encourage others to have a similar debate for their hydrologic domain.     

Evaluation of ground motion selection and modification procedures using synthetic ground motions

This study presents a novel approach for evaluating ground motion selection and modification (GMSM) procedures in the context of probabilistic seismic demand analysis. In essence, synthetic ground motions are employed to derive the benchmark seismic demand hazard curve (SDHC), for any structure and response quantity of interest, and to establish the causal relationship between a GMSM procedure and the bias in its resulting estimate of the SDHC. An example is presented to illustrate how GMSM procedures may be evaluated using synthetic motions. To demonstrate the robustness of the proposed approach, two significantly different stochastic models for simulating ground motions are considered. By quantifying the bias in any estimate of the SDHC, the proposed approach enables the analyst to rank GMSM procedures in their ability to accurately estimate the SDHC, examine the sufficiency of intensity measures employed in ground motion selection, and assess the significance of the conditioning intensity measure in probabilistic seismic demand analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Localizing and quantifying groundwater-surface water interactions at different scales: A tracer approach at the River Moselle,Germany

Groundwater-surface water interactions (GSI) connect rivers and streams with riparian areas and the adjacent aquifer. Although these interactions exert a substantial control of quantity and quality of both groundwater and surface water, knowledge on GSI along rivers at the regional scale, particularly for inland waterways, is still limited. We investigated GSI along the river Moselle, an important federal inland waterway in Germany, by using radon and tritium to identify gaining (water flux from the aquifer to the surface water) and losing (water flux from the surface water to the aquifer) stream conditions, respectively. Gaining stream conditions were identified by continuously measuring radon along the river during boat surveys with a high spatial resolution (every 2 km) during intermediate (October 2020) and near low flow conditions (August/September 2021). The tritium concentrations in surface water and groundwater and the resulting tritium inventories were used to characterize losing stream conditions Monthly tritium inventories from 2017 to 2022 revealed a mean loss for the whole period of 20.3 % and a mean gain of 21.8%. Both were probably triggered by a combination of losing stream conditions and flood-induced mass transfer of water from the aquifer back into the river as well as discharge fluctuations. At the investigated site Lehmen there were direct indications of an influence of surface water due to elevated tritium concentrations in the groundwater (up to 13.3 Bq L⁻¹). Using radon mass balance modelling, good agreements of simulated versus measured radon data with respect to two groundwater end-member scenarios were obtained during intermediate flow (Spearman's ρ: 0.97 and 0.99; MAE: 10.1 and 3.4 Bq L⁻¹) and near low flow (Spearman's ρ: 0.97 and 0.99; MAE: 11 and 6.5 Bq L⁻¹). Considerable groundwater inflow was limited to the meander of Detzem, where cumulated groundwater inflow of about 19 m³ s⁻¹ (9.5% of total discharge) and 4.2 m³ s⁻¹ (3.8% of total discharge) was simulated during intermediate and near low flow, respectively. However, the groundwater inflow was relatively low compared to alpine streams, for example. The study will help to better identify and quantify GSI at the regional scale and provide methodological guidance for future studies focusing on inland waterways.     

Modelling the effects of climatic and hydrological regime changes on the sediment dynamics of the Fraser River Basin,British Columbia,Canada

Future sediment dynamics may be affected by changing climates or hydrological regimes because of the close link between hydrology and sediment erosion, deposition, and transport. Previously, investigations of these potential changes have been constrained by a combination of limited observational data, hydrological drivers, and appropriate mechanistic models. Additionally, there is often ambiguity regarding how to disentangle the impacts of climate and hydrology from direct human factors such as reservoirs and land‐use change, which often exert more control over sediment dynamics. In this study, we utilize a recently developed, large‐scale, distributed, mechanistic sediment transport model to project future sediment erosion, deposition, and transportation within the Fraser River Basin in British Columbia, Canada—a basin with historical water flux and sediment load observations and limited anthropogenic influences upstream of its delta. The sediment model is driven by synthetic land‐surface hydrology derived from Scenarios A1B, A2, and B1 of the Special Report on Emissions Scenarios, which were provided by the Pacific Climate Impacts Consortium. Resulting simulations of water flux and sediment load from 1965 to 1994 are first validated against observational data then compared with future projections. Future projections show an overall increase in annual hillslope erosion and in‐channel transportation, a shift towards earlier spring peak erosion and transportation, and longer persistence of the sediment signal through the year. These shifts in timing and annual yield may have deleterious effects on spawning sockeye salmon and are insufficient to counteract future coastal retreat caused by sea‐level rise.     

Origin and age of The Hillocks and implications for post‐glacial landscape development in the upper Lake Wakatipu catchment,New Zealand

Ambiguous landscape histories can arise from equivocal or incomplete geomorphological, sedimentological or geochronological evidence. In this study, we apply quantitative analyses to robustly assess the origin and age of a field of rounded mounds, known as ‘The Hillocks’. Using clast analysis, the sediment is shown to be consistent with a landslide origin but inconsistent with other glacial sediments in the region. Cosmogenic ¹⁰Be exposure age dating suggests The Hillocks formed ~8 ka. Ground‐penetrating radar reveals that the deposit rests upon deltaic foreset beds; combined with topographical data, we calculate a deposit volume of ~15–27 M m³, consistent with the estimated volume of the proposed source area. Overall, our data support a rock avalanche origin, indicating that by 8 ka the valley was ice‐free at The Hillocks’ location, and the level of Lake Wakatipu was lower than 340 m asl by this time. The Dart River delta shoreline was situated somewhere between The Hillocks and the present day shoreline at that time, and has prograded at a maximum average rate of 1 m a^?1 since ~8 ka. These findings are significant given the lack of landforms by which to constrain glacial or post‐glacial landscape histories in this region of New Zealand. Copyright © 2019 John Wiley & Sons, Ltd.     

Low‐temperature thermochronology of francolite: Insights into timing of Dead Sea Transform motion

Cambrian siliciclastic sequences along the Dead Sea Transform (DST) margin in southern Israel and southern Jordan host both detrital fluorapatite [D‐apatite] and U‐rich authigenic carbonate‐fluorapatite (francolite) [A‐apatite]. D‐apatite and underlying Neoproterozoic basement apatite yield fission‐track (FT) data reflecting Palaeozoic–Mesozoic sedimentary cycles and epeirogenic events, and dispersed (U–Th–Sm)/He (AHe) ages. A‐apatite, which may partially or completely replace D‐apatite, yields an early Miocene FT age suggesting formation by fracturing, hydrothermal fluid ascent and intra‐strata recrystallisation, linked to early DST motion. The DST, separating the African and Arabian plates, records ~105 km of sinistral strike‐slip displacement, but became more transtensional post‐5 Ma. Helium diffusion measurements on A‐apatite are consistent with thermally activated volume diffusion, indicating Tc ~52 to 56 ± 10°C (cooling rate 10°C/Ma). A‐apatite AHe data record Pliocene cooling (~35 to 40°C) during the transtensional phase of movement. This suggests that timing of important milestones in DST motion can be discerned using A‐apatite low‐temperature thermochronology data alone.     

The offshore east African rift system: new insights from the Sakalaves seamounts (Davie Ridge,SW Indian Ocean)

The offshore branch of the East African Rift System (EARS) has developed during Late Cenozoic time along the eastern Africa continental margin. While Neogene–Pleistocene extensional tectonic deformation has been evidenced along the northern segment of the Davie Ridge, the spatial extent of deformation further south remains poorly documented. Based on recent and various oceanographic datasets (bathymetric surveys, dredge samples and seismic profiles), our study highlights active normal faulting, modern east–west extensional tectonic deformation and Late Cenozoic alkaline volcanism at the Sakalaves Seamounts (18°S, Davie Ridge) that seem tightly linked to the offshore EARS development. In parallel, rift‐related tectonic subsidence appears responsible for the drowning of the Sakalaves Miocene shallow‐water carbonate platform. Our findings bring new insights regarding the development of the EARS offshore branch and support recent kinematic models proposing the existence of a plate boundary across the Mozambique Channel.