High-P metamorphism, pattern of induced flow in the mantle wedge, and the link with plutonism in paired metamorphic belts

The convex form of subduction-stage pressure–temperature ( P–T ) paths up to c. 2.0 GPa implies the Sambagawa high- P metamorphic belt, Japan, formed a few million years before ridge subduction. Additional compilation of P–T conditions for higher- P Sambagawa rocks ( c. 2.0–2.5 GPa) reveals that the thermal profile along the slab surface shows a remarkable high- T -ward warping at c. 2.0 GPa ( c. 65 km). Previous thermal models indicate that this warping corresponds to the onset of induced mantle flow towards the subducting slab. If a normal thickness continental crust of c. 30 km was present, this implies the hangingwall region between 30 and 65 km depth was occupied by serpentinized wedge mantle isolated from large-scale mantle flow. Subsequent arrival of the spreading ridge, reheating and dehydration of the serpentinized wedge probably supplied the water necessary for causing granitic magmatism in the Ryoke high- T metamorphic belt, which is paired with the Sambagawa belt.     

Thermodynamics of plagioclase III: Spontaneous strain at the I\overline 1 - P\overline 1 phase transition in Ca-rich plagioclase

The lattice parameters of anorthites An₉₈Ab₂ and An₁₀₀ have been measured from 22 to 1100 K. The spontaneous strain arising from the \(I\overline 1 - P\overline 1\) displacive transition in An₉₈ follows second order Landau behaviour. The spontaneous strain (? _s) couples quadratically to the order parameter (Q ⁰) with ? _s∝Q ⁰²∝(T _c ^* ?T) and T _c ^* =530 K in An₉₈. This is in contrast to the tricritical behaviour observed in pure anorthite. These observations are consistent with a Landau model for the free energy of Ca-rich plagioclases in which Al/Si order and Na content renormalize the fourth order coefficient.     

Observations of mid-troposhheric circulation from water vapour radiances of polar orbiting satellites

Water vapour tracers can provide useful information on winds at ≈ 500mb by observing the 6·7μ radiances. This fills the data gap in the cloud motion winds provided by conventional meteorological geostationary satellites. There is no geostationary satellite at present over the Indian Ocean with 6·7μ imaging capability to provide mid-tropospheric winds. The potentials of 6·7μ radiances, available from polar orbiting satellites, for mid-tropospheric circulation features have been examined in this study. Tiros-N satellite data of May 1979 and ECMWF level-IIIb wind data were analysed to relate the radiances with the streamlines. We find that the radiances of 6·7μ from orbiting satellites agree well with the wind field.     

'Driving people crazy': A geography of boy racers in Christchurch, New Zealand

Abstract:   So-called 'boy racers' form a subculture, which is subject to ongoing public scrutiny and media attention, usually negative. This study aimed to deconstruct the term 'boy racer' and to explore the subculture in detail, within the context of Christchurch, New Zealand, using a phenomenological ethnographic approach. This included conducting semistructured interviews and observing the activities of participants. Results show the subculture has a relatively diverse membership and a range of associated behaviours, activities and attitudes. Moreover, performances within the subculture are linked to place, and are seen by other members of the community as threats to normative boundaries.     

Vortex shedding behind tapered obstacles in neutral & stratified flow

Results of laboratory and numerical experiments on both homogeneous and density-stratified flow over single, bluff obstacles of various shapes are presented. The obstacle height is in most cases of the same order as the base diameter and the major controlling (flow) parameter is the Froude number, defined here as F_h=U/Nh, where U is the (uniform) upstream velocity, h the obstacle height and N is the buoyancy frequency. Attention is concentrated, firstly, on the case of homogeneous flows over rather weakly tapered obstacles and, secondly, for bodies whose height is similar to their base width, on the case F_h=0.1, representing stratification sufficiently strong that lee-wave motions do not play a significant role in the flow dynamics. For right-circular cones it is shown that the sectional contributions to the total fluctuating side force (lift) show significant phase variations up the height of the obstacle, which are not always reflected in the developed vortex street further downstream. For some obstacle shapes, the vortex lines linking the von Karman eddies at different heights can be significantly tilted, particularly in the upper part of the wake. Vortex convection speeds do not appear generally to vary greatly with height and, as found in previous work, the shedding frequency remains constant with height, despite the strong variation of cross-stream obstacle width. By comparison with the homogeneous results, it is suggested that the stratification enhances the shedding instability, which would otherwise be very weak for squat obstacles, but does not annihilate the ability of the flow at one level to influence that at another.     

Microbial–silica interactions in Icelandic hot spring sinter: possible analogues for some Precambrian siliceous stromatolites

Silicified deposits, such as sinters, occur in several modern geothermal environments, but the mechanisms of silicification (and crucially the role of microorganisms in their construction) are still largely unresolved. Detailed examination of siliceous sinter, in particular sections of microstromatolites growing at the Krisuvik hot spring, Iceland, reveals that biomineralization contributes a major component to the overall structure, with approximately half the sinter thickness attributed to silicified microorganisms. Almost all microorganisms observed under the scanning electron microscope (SEM) are mineralized, with epicellular silica ranging in thickness from < 5 μm coatings on individual cells, to regions where entire colonies are cemented together in an amorphous silica matrix tens of micrometres thick. Within the overall profile, there appears to be two very distinct types of laminae that alternate repeatedly throughout the microstromatolite: ‘microbial’ layers are predominantly consisting of filamentous, intact, vertically aligned, biomineralized cyanobacteria, identified as Calothrix and Fischerella sp.; and weakly laminated silica layers which appear to be devoid of any microbial component. The microbial layers commonly have a sharply defined base, overlying the weakly laminated silica, and a gradational upper surface merging into the weakly laminated silica. These cyclic laminations are probably explained by variations in microbial activity. Active growth during spring/summer allows the microorganisms to keep pace with silicification, with the cell surfaces facilitating silicification, while during their natural slow growth phase in the dark autumn/winter months silicification exceeds the bacteria’s ability to compensate (i.e. grow upwards). At this stage, the microbial colony is probably not essential to microstromatolite formation, with silicification presumably occurring abiogenically. When conditions once again become favourable for growth, recolonization of the solid silica surface by free‐living bacteria occurs: cell motility is not responsible for the laminations. We have also observed that microbial populations within the microstromatolite, some several mm in depth, appear viable, i.e. they still have their pigmentation, the trichomes are not collapsed, cell walls are unbroken, cytoplasm is still present and they proved culturable. This suggests that the bulk of silicification occurred rapidly, probably while the cells were still alive. Surprisingly, however, measurements of light transmittance through sections of the microstromatolite revealed that photosynthetically active light (PAL) only transmitted through the uppermost 2 mm. Therefore the ‘deeper’ microbial populations must have either: (i) altered their metabolic pathways; (ii) become metabolically inactive; or (iii) the deeper populations may be dominated by different microbial assemblages from that of the surface. From these collective observations, it now seems unequivocal that microstromatolite formation is intimately linked to microbial activity and that the sinter fabric results from a combination of biomineralization, cell growth and recolonization. Furthermore, the similarities in morphology and microbial component to some Precambrian stromatolites, preserved in primary chert, suggests that we may be witnessing contemporaneous biomineralization processes and growth patterns analogous to those of the early Earth.     

Brest sea level record: a time series construction back to the early eighteenth century

The completeness and the accuracy of the Brest sea level time series dating from 1807 make it suitable for long-term sea level trend studies. New data sets were recently discovered in the form of handwritten tabulations, including several decades of the eighteenth century. Sea level observations have been made in Brest since 1679. This paper presents the historical data sets which have been assembled so far. These data sets span approximately 300 years and together constitute the longest, near-continuous set of sea level information in France. However, an important question arises: Can we relate the past and the present-day records? We partially provide an answer to this question by analysing the documents of several historical libraries with the tidal data using a ‘data archaeology’ approach advocated by Woodworth (Geophys Res Lett 26:1589–1592, 1999b). A second question arises concerning the accuracy of such records. Careful editing was undertaken by examining the residuals between tidal predictions and observations. It proved useful to remove the worst effects of timing errors, in particular the sundial correction to be applied prior to August 1, 1714. A refined correction based on sundial literature [Savoie, La gnomique, Editions Les Belles Lettres, Paris, 2001] is proposed, which eliminates the systematic offsets seen in the discrepancies in timing of the sea level measurements. The tidal analysis has also shown that shallow-water tidal harmonics at Brest causes a systematic difference of 0.023 m between mean sea level (MSL) and mean tide level (MTL). Thus, MTL should not be mixed with the time series of MSL because of this systematic offset. The study of the trends in MTL and MSL however indicates that MTL can be used as a proxy for MSL. Three linear trend periods are distinguished in the Brest MTL time series over the period 1807–2004. Our results support the recent findings of Holgate and Woodworth (Geophys Res Lett) of an enhanced coastal sea level rise during the last decade compared to the global estimations of about 1.8 mm/year over longer periods (Douglas, J Geophys Res 96:6981–6992, 1991). The onset of the relatively large global sea level trends observed in the twentieth century is an important question in the science of climate change. Our findings point out to an ‘inflexion point’ at around 1890, which is remarkably close to that in 1880 found in the Liverpool record by Woodworth (Geophys Res Lett 26:1589–1592, 1999b).     

A Pb-Ra-Th-U study of Klyuchevskoy and Bezymianny volcanoes, Kamchatka

Lavas from Klyuchevskoy and Bezymianny volcanoes, Kamchatka, appear to show a link between the extent of partial melting in their mantle source region and the subsequent degree of fractionation suffered by the magmas during passage through the crust. This fractionation may have occurred on timescales significantly less than 1000 years if observed ²²⁶Ra excesses largely reflect variable residual porosity in the source melting region. Unlike most arc lavas, those with the highest MgO contents and Ba/Th ratios have the lowest ²²⁶Ra excess. Forward models suggest that those portions of the source which had undergone the greatest addition of U by fluids from the subducting plate also underwent the greatest extents of partial melting at the highest residual porosity. At Kluchevskoy, a change from eruption of high-MgO to high-Al₂O₃ basaltic andesites around 1945 is reflected in an increase in size of ²²⁶Ra excess which seems to require a simultaneous decrease in residual porosity and suggests a rapid changes in the melting regime. The eruption of andesites at Bezyminanny, simultaneous with the eruption of basaltic andesites at Klyuchevskoy, further suggests that different degree melts produced at differing residual porosity can be formed and extracted from the melt region at the same time. Thus, the melting processes beneath Klyuchevskoy and Bezyminanny are demonstrably complex. They have clearly been influenced by both fluid addition from the subducting plate and extension and decompression beneath the Central Kamchatka Depression. Finally, the ²¹⁰Pb data are, with one or two exceptions, in equilibrium with ²²⁶Ra, suggesting that there was restricted relative magma-gas movement in this highly productive magmatic system.