Reduction in Exhaust Gas Temperature of Biodiesel Fueled Engine by Exhaust Gas Recirculation

Biodiesel is a renewable alternative fuel that can be used as substitute for mineral diesel. The use of biodiesel in diesel engines reduces all of the exhaust emissions expect NO_x. The higher temperature in the combustion chamber increases the NO_x emissions. The recirculation of a small percentage of cooled exhaust gases into the combustion chamber through the intake manifold reduces the in‐cylinder temperature. Moreover, the cooling of exhaust gases before mixing with fresh air introduced to the engine does not affect its volumetric efficiency but it absorbs the heat of combustion. This leads to a reduction in NO_x emissions and improves the engine brake thermal efficiency. This paper describes the investigation of the performance and emission characteristics of a biodiesel‐fueled, naturally aspirated, single cylinder diesel engine with cooled exhaust gas recirculation.     

Ductile deformation and development of andalusite microstructures in the Hongusan area: Constraints on the metamorphism and tectonics of the Ryoke Belt

Abstract   The main mesoscopic features of the ductile deformation in the Hongusan region of the Ryoke Belt can be explained in terms of a single deformation phase, Dm . The associated stretching lineation is roughly east–west and has an associated top-to-the-west sense of shear. This information fills an important gap in our knowledge about the deformational history of the Ryoke metamorphic belt. Andalusite porphyroblasts are well-developed in the Hongusan area and their microstructure can be used to link the deformational history with the metamorphism. However, the andalusite porphyroblasts show both intertectonic and post-tectonic microstructures. Some porphyroblasts have an intertectonic core and post-tectonic rim. Analysis of associated metamorphic minerals and bulk-rock chemistry suggests that the distinct types of microstructure can be explained in terms of distinct formation reactions related to regional and contact metamorphism. The intertectonic microstructure shows the presence of a deformation pre-dating Dm , referred to as Dc . These two deformation stages are sufficient to account for all the main deformation features. The distribution of post-tectonic andalusite growth shows a very broad thermal effect around an intrusion in the area. This can help place constraints on the thermal history of the Ryoke metamorphic belt.     

Geodetic constraints on active tectonics of the Western Mediterranean: Implications for the kinematics and dynamics of the Nubia-Eurasia plate boundary zone

We present GPS observations in Morocco and adjacent areas of Spain from 15 continuous (CGPS) and 31 survey-mode (SGPS) sites extending from the stable part of the Nubian plate to central Spain. We determine a robust velocity field for the W Mediterranean that we use to constrain models for the Iberia-Nubia plate boundary. South of the High Atlas Mountain system, GPS motions are consistent with Nubia plate motions from prior geodetic studies. We constrain shortening in the Atlas system to <1.5 mm/yr, 95% confidence level. North of the Atlas Mountains, the GPS velocities indicate Nubia motion with respect to Eurasia, but also a component of motion normal to the direction of Nubia-Eurasia motion, consisting of southward translation of the Rif Mountains in N Morocco at rates exceeding 5 mm/yr. This southward motion appears to be directly related to Miocene opening of the Alboran Sea. The Betic Mountain system north of the Alboran Sea is characterized by WNW motion with respect to Eurasia at ～1–2 mm/yr, paralleling Nubia-Eurasia relative motion. In addition, sites located in the Betics north of the southerly moving Rif Mountains also indicate a component of southerly motion with respect to Eurasia. We interpret this as indicating that deformation associated with Nubia-Eurasia plate motion extends into the southern Betics, but also that the Betic system may be affected by the same processes that are causing southward motion of the Rif Mountains south of the Alboran Sea. Kinematic modeling indicates that plate boundary geometries that include a boundary through the Straits of Gibraltar are most compatible with the component of motion in the direction of relative plate motion, but that two additional blocks (Alboran-Rif block, Betic Mountain block), independent of both Nubia and Eurasia are needed to account for the motions of the Rif and Betic Mountains normal to the direction of relative plate motion. We speculate that the southward motions of the Alboran-Rif and Betic blocks may be related to mantle flow, possibly induced by southward rollback of the subducted Nubian plate beneath the Alboran Sea and Rif Mountains.     

The inner scale of the plasma turbulence towards PSR J1644−4559

By measuring the decaying shape of the scatter-broadened pulse from the bright distant pulsar PSR J1644−4559, we probe waves scattered at relatively high angles by very small spatial scales in the interstellar plasma, which allows us to test for a wavenumber cutoff in the plasma density spectrum. Under the hypothesis that the density spectrum is due to plasma turbulence, we can thus investigate the (inner) scale at which the turbulence is dissipated. We report observations carried out with the Parkes radio telescope at 660 MHz from which we find strong evidence for an inner scale in the range 70–100 km, assuming an isotropic Kolmogorov spectrum. By identifying the inner scale with the ion inertial scale, we can also estimate the mean electron density of the scattering region to be 5–10 cm⁻³. This is comparable with the electron density of H  ii region G339.1−0.4, which lies in front of the pulsar, and so confirms that this region dominates the scattering. We conclude that the plasma inside the region is characterized by fully developed turbulence with an outer scale in the range 1–20 pc and an inner scale of 70–100 km. The shape of the rising edge of the pulse constrains the distribution of the strongly scattering plasma to be spread over about 20 per cent of the 4.6 kpc path from the pulsar, but with similarly high electron densities in two or more thin layers, their thicknesses can only be 10–20 pc.     

Planetary theories with the aid of the expansions of elliptic functions

For coplanar circular orbits, the mutual perturbations between two bodies can be expressed in term of the argument of Jacobian elliptic functions instead of the difference of the mean longitudes. For a given pair of planets, such a change of time variable improves the convergence of the developments. At the first order of planetary masses an integration of Lagrange's equations for the osculating elements is performed. When compared to classical developments the results are reduced by an important factor. The method is then extended to the mutual perturbations of Jupiter and Saturn, at any order of planetary masses, either with Fourier series with two arguments, or with one argument solely, taking advantage of the close commensurability of the mean motions.     

Estimates for the luminosity function of galaxies and its evolution

A new method is presented to obtain a non-parametric maximum likelihood estimate of the luminosity function and the selection function of a flux-limited redshift survey. The method parametrizes the selection function as a series of stepwise power laws and allows possible evolution of the luminosity function. We also propose a new technique to estimate the rate of evolution of the luminosity function. This is based on a minimization of the observed large-scale power with respect to the evolutionary model. We use an ensemble of mock surveys extracted from an N -body simulation to verify the power of this method. We apply our estimators to the 1.2-Jy survey of IRAS galaxies. We find a far-infrared luminosity function in good agreement with previously published results and evidence for rather strong evolution. If the comoving number density of IRAS galaxies is assumed to scale ∝ (1 +  z ) ^P , we estimate P  = 4.3 ± 1.4.     

Contact Partial Melting of Granitic Country Rock, Melt Segregation, and Re-injection as Dikes into Ferrar Dolerite Sills, McMurdo Dry Valleys, Antarctica

Numerous, interconnected, granitic dikes (<30 cm in widthand hundeds of meters in length) cut Ferrar dolerite sills ofthe McMurdo Dry Valleys, Antarctica. The source of the graniticdikes is partial melting of granitic country rock, which tookplace in the crust at a depth of about 2–3 km adjacentto contacts with dolerite sills. Sustained flow of doleriticmagma through the sill generated a partial melting front thatpropagated into the granitic country rock. Granitic partialmelts segregated and collected at the contact in a melt-rich,nearly crystal-free reservoir adjacent to the initial doleritechilled margin. This dolerite chilled margin was subsequentlyfractured open in the fashion of a trapdoor by the graniticmelt, evacuating the reservoir to form an extensive complexof granitic dikes within the dolerite sills. At the time ofdike injection the dolerite was nearly solidified. Unusuallycomplete exposures allow the full physical and chemical processesof partial melting, segregation, and dike formation to be examinedin great detail. The compositions of the granitic dikes andthe textures of partially melted granitic wall rock suggestthat partial melting was characterized by disequilibrium mineraldissolution of dominantly quartz and alkali feldspar ratherthan by equilibrium melting. It is also unlikely that meltingoccurred under water-saturated conditions. The protolith granitecontains only 7 vol.% biotite and estimated contact temperaturesof 900–950°C suggest that melting was possible ina dry system. Granite partial melting, under closed conditions,extended tens of meters away from the dolerite sill, yet meltsegregation occurred only over less than one-half a meter fromthe dolerite chilled margin where the degree of partial meltingwas of the order of 50 vol.%. This segregation distance is consistentwith calculated length scales expected in a compaction-drivenprocess. We suggest that the driving force for compaction wasdifferential stress generated by a combination of volume expansionas a result of granite partial melting, contraction during doleritesolidification, and relaxation of the overpressure driving doleriteemplacement. On a purely chemical basis, the extent of meltsegregation necessary under fractional and batch melting tomatch the Rb concentrations between melt and parent rock isa maximum of 48 and 83 vol.% melt, respectively. KEY WORDS: Antarctica; dike injection; disequilibrium; granite partial melting; silicic melt segregation     

Calculation of the Inverse of the Covariance

In reservoir characterization, the covariance is often used to describe the spatial correlation and variation in rock properties or the uncertainty in rock properties. The inverse of the covariance, on the other hand, is seldom discussed in geostatistics. In this paper, I show that the inverse is required for simulation and estimation of Gaussian random fields, and that it can be identified with the differential operator in regularized inverse theory. Unfortunately, because the covariance matrix for parameters in reservoir models can be extremely large, calculation of the inverse can be a problem. In this paper, I discuss four methods of calculating the inverse of the covariance, two of which are analytical, and two of which are purely numerical. By taking advantage of the assumed stationarity of the covariance, none of the methods require inversion of the full covariance matrix.     

A community-wide intercomparison exercise for the determination of dissolved iron in seawater

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.