The Madden–Julian oscillation in ECHAM4 coupled and uncoupled general circulation models

The Madden-Julian oscillation (MJO) dominates tropical variability on timescales of 30–70 days. During the boreal winter/spring, it is manifested as an eastward propagating disturbance, with a strong convective signature over the eastern hemisphere. The space–time structure of the MJO is analyzed using simulations with the ECHAM4 atmospheric general circulation model run with observed monthly mean sea-surface temperatures (SSTs), and coupled to three different ocean models. The coherence of the eastward propagation of MJO convection is sensitive to the ocean model to which ECHAM4 is coupled. For ECHAM4/OPYC and ECHO-G, models for which ~100 years of daily data is available, Monte Carlo sampling indicates that their metrics of eastward propagation are different at the 1% significance level. The flux-adjusted coupled simulations, ECHAM4/OPYC and ECHO-G, maintain a more realistic mean-state, and have a more realistic MJO simulation than the nonadjusted scale interaction experiment (SINTEX) coupled runs. The SINTEX model exhibits a cold bias in Indian Ocean and tropical West Pacific Ocean sea-surface temperature of ~0.5°C. This cold bias affects the distribution of time-mean convection over the tropical eastern hemisphere. Furthermore, the eastward propagation of MJO convection in this model is not as coherent as in the two models that used flux adjustment or when compared to an integration of ECHAM4 with prescribed observed SST. This result suggests that simulating a realistic basic state is at least as important as air–sea interaction for organizing the MJO. While all of the coupled models simulate the warm (cold) SST anomalies that precede (succeed) the MJO convection, the interaction of the components of the net surface heat flux that lead to these anomalies are different over the Indian Ocean. The ECHAM4/OPYC model in which the atmospheric model is run at a horizontal resolution of T42, has eastward propagating zonal wind anomalies and latent heat flux anomalies. However, the integrations with ECHO-G and SINTEX, which used T30 atmospheres, produce westward propagation of the latent heat flux anomalies, contrary to reanalysis. It is suggested that the differing ability of the models to represent the near-surface westerlies over the Indian Ocean is related to the different horizontal resolutions of the atmospheric model employed.     

Analisi periodale delle serie dei livelli marini di Trieste e Venezia

Riassunto Alle due serie di livelli medi, quella cinquantennale di Trieste e quella settantennale di Venezia, si applica l'analisi periodale secondo il metodoVercelli. Si ottengono onde componenti di anni 22, 11,3, 8, 5,5, 4, 3, 2. Le onde corrispondenti delle due località sono in buon accordo di fase. Le ampiezze delle componenti di Venezia sono leggermente maggiori di quelle di Trieste. L'asse medio del diagramma di Trieste presenta una salita di 11 cm in 52 anni, quello di Venezia di 15 cm in 70 anni.

---

Summary To the series of yearly values of the mean heights of the sea-level for the ports of Trieste and Venice has been applied the periodal analysis after the method ofVercelli. From this are derived component waves almost-persistent and almost-periodical of 22, 11,3, 8, 5,5, 4, 3, 2 years. The mean axis shows the following variations for every ten years: an ascent of 2 cm in the port of Trieste and of 2.5 cm in the port of Venice.

---

Zusammenfassung Es wird dieVercelli Periodalanalyse an den zwei Reihen, eine 50- eine 70jährige, von jährlichen mittleren Wasserständen bezüglich der Hafen von Triest und Venedig angewendet. Man erhält Komponentwellen die Perioden von 22-11,3-8-5,5-4-3-2 Jahren haben. Die entsprechenden Wellen der zwei Lokalitäten sind in einer guten Uebereinstimmung der Phase. Die Amplituden der Komponentwellen von Venedig sind etwas grösser als diejenigen von Triest. Die mittlere Achse stellt einen Aufstieg dar, welche für ein Jahrzehnt 2 cm für Triest und 2,5 für Venedig beträgt.

---

---

Lavoro eseguito con il contributo del Consiglio Nazionale delle Ricerche.     

Constraining the pass-band of future space-based coronagraphs for observations of solar eruptions in the FeXIV 530.3 nm “green line”

Observations of the solar corona in the FeXIV 530.3 nm “green line” have been very important in the past, and are planned for future coronagraphs on-board forthcoming space missions such as PROBA-3 and Aditya. For these instruments, a very important parameter to be optimized is the spectral width of the band-pass filter to be centred over the “green line”. Focusing on solar eruptions, motions occurring along the line of sight will Doppler shift the line profiles producing an emission that will partially fall out of the narrower pass-band, while broader pass-band will provide observations with reduced spectral purity. To address these issues, we performed numerical (MHD) simulation of CME emission in the “green line” and produced synthetic images assuming 4 different widths of the pass-band (Δλ = 20 Å, 10 Å, 5 Å, and 2 Å). It turns out that, as expected, during solar eruptions a significant fraction of “green line” emission will be lost using narrower filters; on the other hand these images will have a higher spectral purity and will contain emission coming from parcels of plasma expanding only along the plane of the sky. This will provide a better definition of single filamentary features and will help isolating single slices of plasma through the eruption, thus reducing the problem of superposition of different features along the line of sight and helping physical interpretation of limb events. For these reasons, we suggest to use narrower band passes (Δλ ≤ 2 Å) for the observations of solar eruptions with future coronagraphs.     

Differential Alteration of Ilmenite in a Tropical Beach Placer, Southern India: Microscopic and Electron Probe Evidences

Abstract. The study based on microscopic and microprobe techniques reveals that ilmenite of Manavalakurichi deposit has generally reached the alteration phase of 'leached ilmenite'. The XRD and bulk chemical analysis confirm the limited alteration undergone by ilmenite grains. Ilmenite alteration has been found to be a process of continuous leaching of iron from the mineral lattice and hydroxylisation. The enrichment of trace elements with progressive alteration is discussed. Si and Al are enriched by more than 100 fold. The prevalence of reducing environment at present in the deposit indicates that the oxidation of ferrous iron leading to pseudorutile formation would have occurred during transportation of sediments.     

U–Pb zircon geochronological and petrographic constraints on late to post‐collisional Variscan magmatism and metamorphism in the Ligurian Alps,Italy

In the Ligurian Alps, the Barbassiria massif (a Variscan basement unit of the Briançonnais domain) is made up of orthogneisses derived from K‐rich rhyolite protoliths and minor rhyolite dykes. However, on account of subsequent Alpine deformation and a related blueschist facies metamorphic overprint that are pervasive within the Barbassiria Orthogneisses, little evidence of the earlier Variscan metamorphism is preserved. In this study, new U–Pb laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) dating of zircon from the Barbassiria Orthogneisses and dykes was undertaken to unravel the relationships between protolith magmatism and the Variscan metamorphic overprint. The results suggest a protolith age for the Barbassiria Orthogneisses of ~315–320 Ma (i.e., Early/Late Carboniferous), and constrain the age of a subsequent rhyolite dyke emplacement event to 260.2 ± 3.1 Ma (i.e., Late Permian). The Variscan high‐temperature (greenschist–amphibolite facies) metamorphic event that affected the Barbassiria Orthogneisses was likely associated with both tectonic burial and compression during the final stages of the Variscan collision during the Late Carboniferous period. Emplacement of late‐stage rhyolite dykes that cut the Barbassiria Orthogneisses is linked to a diffuse episode of Late Permian rhyolite volcanism that is commonly observed in the Ligurian Alps. The age of this dyke emplacement event followed a ~10–15 Ma Mid‐Permian gap in the volcano‐sedimentary cover sequence of the Ligurian Alps, and represents the post‐orogenic stage in this segment of the Variscides. Copyright © 2012 John Wiley & Sons, Ltd.     

Unraveling the Schneeberg garnet puzzle: a numerical model of multiple nucleation and coalescence

A quantitative kinetic model for the growth of the different garnet porphyroblast microstructures (type 1 and type 2) of the Western Schneeberg Complex (WSC) is presented. These porphyroblasts formed by a multiple nucleation and coalescence mechanism. Our numerical simulation shows that at constant diffusion rates: (1) low interface reaction rates result in a fully amalgamated porphyroblast (type 2); (2) intermediate reaction rates result in a porphyroblast, where coalescence of grains closer to the margin prevented amalgamation of those in the centre (similar to type 1 porphyroblasts); and (3) high interface reaction rates result in a porphyroblast microstructure with an atoll form. All three microstructures are characterised by distinctive cluster size distributions. A 2-D cluster size distribution analysis of type 1 porphyroblasts of WSC shows that these did not form because of intermediate interface reaction rates, but because the diffusion rate of nutrients was too low to keep pace with the interface reaction rate.Editorial responsibility: T.L. Grove     

Fuzzy parameters analysis of time‐dependent fracture of concrete dam models

In order to apply the mechanical properties (measured on material specimens or laboratory‐sized models) to large structures (such as concrete dams), a non‐linear theory able to predict the size‐scale effect has to be used. One of these theories was first proposed by Hillerborg and co‐workers (fictitious crack model) and is based on the earlier works by Barenblatt and Dugdale for metals (cohesive crack model). It is based on the existence of a fracture process zone (FPZ), where the material undergoes strain softening. The behaviour of the material outside the FPZ is linear elastic. A large number of short‐time laboratory tests were executed, by varying the load, under crack mouth opening displacement control. Since concrete exhibits a time‐dependent behaviour, an interaction between creep and micro‐crack growth occurs in the FPZ. Therefore, different testing conditions can be applied: rupture can be achieved by keeping the load constant before peak value (pre‐peak tests), or after peak value and after an unloading and reloading procedure (post‐peak tests). The crack propagation rate is shown to be small enough to neglect inertial forces and large enough to keep the time‐dependent behaviour of the process zone as dominant compared to the behaviour of the undamaged and viscoelastic zone. Due to the variability in material microstructure from one specimen to another, experimental data show large ranges of scatter. Well established methods in probability theory require sufficient experimental data in order to assume a probability density distribution. The objective of this study is to investigate the ranges of variation of the time response under constant load in simple structural elements associated with pre‐selected variation (fuzziness) in the main material parameters. For situations where the values of the material parameters are of a non‐stochastic nature, the fuzzy set approach to modelling variability has been proposed as a better and more natural approach. Copyright © 2002 John Wiley & Sons, Ltd.