How do management alternatives of fast-growing forests affect water quantity and quality in southeastern Brazil? Insights from a paired catchment experiment

Fast-growing forest plantations have been expanding in Brazil in the last 50 years, which reach productivities by over 40 m³ ha⁻¹ year⁻¹ in reduced rotation between 5 and 15 years. In the 1990s, environmental warnings about these plantations guided research projects seeking to understand their effects on water and propose forest management actions to minimize them. The assessment of forest management effects on water resources is conducted by long-term experiments in paired catchments. In this paper we present results of some studies conducted at the hydrological monitoring centre of Itatinga Experimental Forest Station, of the University of São Paulo, where hydrological monitoring began in 1987, and currently include three catchments (83–98 ha) under different forest management regimes: short-rotation Eucalyptus plantation, long-term forest plantation mosaic and native forest restoration. Results show that at similar conditions observed at study area including deep soils and good natural water regulation, hydrological effects vary according to the forest management regime adopted, increasing water consumption and making the flow regime vulnerable to intra- and inter-annual seasonality. Regarding water quality, weekly sampling results showed suspended sediments and nitrate concentrations below water quality thresholds criteria by silvicultural operations, and the effects were transient but higher concentrations of nutrients were observed in intensive management regime. In the study area, reducing the management intensity of forest plantation by increasing the rotation time, adopting forest age mosaic and avoiding the coppice technique are alternative choices that reduced water use and increased flow regulation. Different adopted forest management schemes directly affected water use, showing that in water-deficit tropical regions, management regime of fast-growing forest plantations controls water availability.     

The definition of potential infiltration areas in Guaratinguetá watershed, Paraíba do Sul Basin, Southeastern Brazil: an integrated approach using physical and land-use elements

This work describes the methodological approach used for mapping the potential infiltration areas of the Guaratinguetá watershed (160?km²), situated in Southeastern Brazil. The method is considered a qualitative approach, which takes into account thematic maps (geology, pedology, geomorphology, and land use/land cover) and the precipitation spatial distribution. A group of experts in Earth Sciences and Geotechnical Engineering has applied an infiltration potential scale factor that ranges from 5 (highest influence) to 1 (lowest influence). The final infiltration map was produced using several ArcGIS^? tools. The results showed that the most suitable (very high) infiltration areas represent only around 7% of the watershed area, which are associated with smooth and gentle hills, fluvial Tertiary sediments and yellow oxisols. However, growing impacts caused by land farming and urban developments require urgent planning for this region. Areas with high to moderate capacity of infiltration represent around 56% of the watershed and are found in the domain of igneous-metamorphic rocks associated with steep hill-slopes and relatively well-preserved forest fragments. This region requires a land-use strategy, such as reforestation programs, in order to increase the infiltration capacity of the watershed.     

U–Pb zircon geochronological and petrographic constraints on late to post‐collisional Variscan magmatism and metamorphism in the Ligurian Alps,Italy

In the Ligurian Alps, the Barbassiria massif (a Variscan basement unit of the Briançonnais domain) is made up of orthogneisses derived from K‐rich rhyolite protoliths and minor rhyolite dykes. However, on account of subsequent Alpine deformation and a related blueschist facies metamorphic overprint that are pervasive within the Barbassiria Orthogneisses, little evidence of the earlier Variscan metamorphism is preserved. In this study, new U–Pb laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) dating of zircon from the Barbassiria Orthogneisses and dykes was undertaken to unravel the relationships between protolith magmatism and the Variscan metamorphic overprint. The results suggest a protolith age for the Barbassiria Orthogneisses of ~315–320 Ma (i.e., Early/Late Carboniferous), and constrain the age of a subsequent rhyolite dyke emplacement event to 260.2 ± 3.1 Ma (i.e., Late Permian). The Variscan high‐temperature (greenschist–amphibolite facies) metamorphic event that affected the Barbassiria Orthogneisses was likely associated with both tectonic burial and compression during the final stages of the Variscan collision during the Late Carboniferous period. Emplacement of late‐stage rhyolite dykes that cut the Barbassiria Orthogneisses is linked to a diffuse episode of Late Permian rhyolite volcanism that is commonly observed in the Ligurian Alps. The age of this dyke emplacement event followed a ~10–15 Ma Mid‐Permian gap in the volcano‐sedimentary cover sequence of the Ligurian Alps, and represents the post‐orogenic stage in this segment of the Variscides. Copyright © 2012 John Wiley & Sons, Ltd.     

Analyse de sensibilité globale du modèle CATHY aux propriétés hydrodynamiques du sol d’un micro-bassin agricole drainé

Résumé

Une étude d’analyse de sensibilité globale d’une application du modèle hydrologique CATHY (CATchment HYdrology) sur un bassin sous influence de drains agricoles a été réalisée en utilisant les méthodes Morris, FAST99 (Fourier Amplitude Sensitivity Test) et Sobol2002. Ces analyses ont permis d’identifier les paramètres les plus sensibles sur : (a) l’écoulement aux drains et (b) les flux sortant du micro-bassin agricole Bras d’Henri (Québec, Canada). Des 24 paramètres évalués par la méthode de Morris, les neuf et huit paramètres ayant été respectivement très influents sur les deux variables de sortie, ont été analysés par les méthodes FAST99 et Sobol2002. Il s’ensuit que la conductivité hydraulique horizontale à saturation dans les couches sous les drains est la propriété hydrodynamique la plus influente sur les deux variables de sortie. Cette étude démontre que des efforts devraient être portés sur la caractérisation de l’anisotropie du sol, car celle-ci n’est pas à négliger lors d’une modélisation hydrologique tridimensionnelle.

Editeur Z.W. Kundzewicz     

Contrasting radon background levels in volcanic settings: clues from 220Rn activity concentrations measured during long-term deformation experiments

To better understand the mechanisms leading to different radon background levels in volcanic settings, we have performed two long-term deformation experiments of 16 days using a real-time setup that enables us to monitor any variation of radon activity concentration during rock compression. Our measurements demonstrate that, in the case of highly porous volcanic rocks, the emanating power of the substrate changes as a function of the volcanic stress conditions. Constant magmatic pressures, such as those observed during dike intrusions and hydrothermal fluid injections, can result in pervasive pore collapse that is mirrored by a significant radon decrease until a constant emanation is achieved. Conversely, repeated cycles of stress due to, for example, volcano inflation/deflation cycles, cause a progressive radon increase a few days (but even weeks and months) before rupture. After rock failure, however, the formation of new emanation surfaces leads to a substantial increase of the radon signal. Our results suggest that surface deformation in tectonic and volcanic settings, such as inflation/deflation or constant magmatic pressures, have important repercussions on the emanating power of volcanic substrates.     

Kinematic evolution of thrusts wedge and erratic line length balancing: insights from deformed sandbox models

Kinematic evolution of fold-thrust structures has been investigated by analogue models that include syntectonic sedimentation. Different decollement dips and basement thicknesses produced different wedge geometries and propagating characteristics. A model with one decollement level was characterized by a closely spaced thrust system during early stages of shortening as compared to the late stages. The frequency of fault nucleation was rapid during the early stages of deformation. Conversely, the frequency of fault nucleation was low and thrust spacing was significantly wider in a model with two decollement levels. Individual faults became locked at steep dips and deformation stepped forward as a new fault nucleated in-sequence in front of the older locked structure. Once the thrust system was established up to 27 % overall shortening, an overlying bed was introduced to simulate syntectonic deformation. Model sand wedge did not grow self similarly but rather its length and height increased episodically with deformation. Restoration of deformed models show that layer parallel shortening accommodated for approximately half of the total model shortening across the multilayers. Calculated error in apparent layer shortening from the restored layers revealed a direct relation with depth of the layers in the models. The experimental results are comparable to a natural example from the Northern Apennines fold-and-thrust belts.     

Sediment geochemistry of the urban Lake Paulo Gorski

The objective of this study was to evaluate the concentration and distribution of heavy metals in the sediments of Paulo Gorski Lake, as well as the metals’ bioavailability and potential ecological risk, and to define the anthropogenic and natural heavy metal contributions to the lake. The chemical elements calcium (Ca), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), sodium (Na), nickel (Ni), lead (Pb), and zinc (Zn) were quantified by flame atomic absorption spectrophotometry with two extraction methods to quantify the bioavailable and non-bioavailable fractions. The data were evaluated using multivariate statistics and sediment quality indices. All sediment collection points (S1, S2, S3, S4 and S5) are different in terms of the concentration of heavy metals, except for S4 and S5, which were statistically equal. The bioavailable fraction of the elements in the sediment follows the sequence Pb>Cu>Mn>Zn>Ni>Cr>phosphorus (P) for all points. The elements Co, Cr, Pb, and Zn showed moderate to considerable contamination at all points. Only points S3 and S5 had moderate ecological risk. Urbanization has been affecting Paulo Gorski Lake via the input of chemical elements, especially Co and Pb. The points most affected by heavy metal contamination are S3 and S5 when the sedimentological sensitivity factor is considered. The lake has high hydrodynamics, causing some of the contaminants that enter the system to leave it, leading to potential negative impacts downstream.     

Holocene sea-surface temperature variability in the Chilean fjord region

Here we provide three new Holocene (11–0 cal ka BP) alkenone-derived sea surface temperature (SST) records from the southernmost Chilean fjord region (50–53°S). SST estimates may be biased towards summer temperature in this region, as revealed by a large set of surface sediments. The Holocene records show consistently warmer than present-day SSTs except for the past ~ 0.6 cal ka BP. However, they do not exhibit an early Holocene temperature optimum as registered further north off Chile and in Antarctica. This may have resulted from a combination of factors including decreased inflow of warmer open marine waters due to lower sea-level stands, enhanced advection of colder and fresher inner fjord waters, and stronger westerly winds. During the mid-Holocene, pronounced short-term variations of up to 2.5°C and a cooling centered at ~ 5 cal ka BP, which coincides with the first Neoglacial glacier advance in the Southern Andes, are recorded. The latest Holocene is characterized by two pronounced cold events centered at ~ 0.6 and 0.25 cal ka BP, i.e., during the Little Ice Age. These cold events have lower amplitudes in the offshore records, suggesting an amplification of the SST signal in the inner fjords.     

The Serra da Graciosa A-type Granites and Syenites, southern Brazil. Part 3: Magmatic evolution and post-magmatic breakdown of amphiboles of the alkaline association

Amphiboles are the main mafic minerals in most metaluminous to peralkaline alkali-feldspar granites and syenites, and they usually preserve an important record of the compositional evolution of the melts from which they crystallize. In the alkaline association of the Serra da Graciosa A-type Granites and Syenites (southern Brazil), amphibole compositions span a large range, including calcic, sodic–calcic, and sodic amphiboles. Calcic amphiboles are typically observed in the metaluminous rocks, while sodic amphiboles are characteristic of the more strongly peralkaline rocks; sodic–calcic amphiboles are found in intermediate varieties. Compositional variations record the differentiation trends within two petrographic series of the alkaline association. The overall evolution of amphibole compositions is similar in both: they reveal a progressive increase in Na and Fe³⁺ with differentiation (increase in alkalinity of the magmas), a characteristic shared by undersaturated peralkaline (or agpaitic) differentiation trends. In detail, however, the evolutions of the amphibole compositions in the two series are distinct. In Alkaline series 1, the cores of the crystals form a continuum from calcic to sodic compositions, with the exception of a small compositional gap within the sodic–calcic amphiboles. The rims, however, show compositions that diverge from this main trend; this divergence results from increasing amounts of the oxy-amphibole component, and reflects more oxidizing conditions at the final stages of magmatic crystallization. In Alkaline series 2, these oxidation trends are much more subtle and a reverse trend is observed in the sodic amphiboles. Sodic–calcic amphiboles are in several cases replaced by intergrowths of post-magmatic sodic amphibole and Al-poor (“tetrasilicic”) biotite.