Rainfall interception by tree crown and leaf litter: An interactive process

Rainfall interception research in forest ecosystems usually focuses on interception by either tree crown or leaf litter, although the 2 components interact when rainfall occurs. A process‐based study was conducted to jointly measure rainfall interception by crown and litter and the interaction between the 2 interception processes for 4 tree species (Platycladus orientalis and Pinus tabulaeformis represented needle‐leaf species, and Quercus variabilis and Acer truncatum represented broadleaf species) at 3 simulated rainfall intensities (10, 50, and 100 mm hr^?1). Results indicated that (a) crown and litter interception processes incorporated 3 phases: the dampening phase, the steady saturation phase, and the postrainfall drainage phase, but the dampening phase for litter interception usually lasted 30 min longer than for crown interception; (b) the maximum and minimum interception storage (C _max and C _min ) for the crown were 0.63 and 0.36 mm on average, and litter C _max and C _min were 5.38 and 2.36 mm, respectively; (c) generally, crown and litter C _max and C _min increased when gross precipitation increased significantly (p  < .05) from 10 to 100 mm; and (4) crown C _max and C _min for needle‐species were 1.8 and 1.2 times larger than broadleaf species, whereas broadleaf litter showed the opposite, its C _max and C _min were 2.0 and 1.6 times larger than needle‐leaf litter on average; however, no significant differences were observed in crown and litter C _max and C _min between species on per leaf area and litter thickness basis. Results were normalized by total leaf area and litter thickness to provide a way to scale up from young trees to mature forests. Overall, rainfall interception was affected by biotic and abiotic factors together and could be quantified via multiple linear regression functions.     

Ultradeep diamonds originate from deep subducted sedimentary carbonates

Diamonds are renowned as the record of Earth’s evolution history. Natural diamonds on the Earth can be distinguished in light of genetic types as kimberlitic diamonds (including peridotitic diamonds and eclogitic diamonds), ultrahigh-pressure metamorphic diamonds and ophiolitic diamonds. According to the inclusion mineralogy, most diamonds originated from continental lithospheric mantle at depths of 140–250 km. Several localities, however, yield ultradeep diamonds with inclusion compositions that require a sublithospheric origin (>~250 km). Ultradeep diamonds exhibit distinctions in terms of carbon isotope composition, N-concentration, mineral inclusions and so on. The present study provides a systematic compilation concerning the features of ultradeep diamonds, based on which to expound their genesis affinity with mantle-carbonate melts. The diamond-parental carbonate melts are proposed to be stemmed from the Earth’s crust through subduction of oceanic lithosphere. Ultradeep diamonds are classified into a subgroup attaching to kimberlitic diamonds grounded by formation mechanism, and present connections in respect of carbon origin to eclogitic diamonds, ultrahigh-pressure metamorphic diamonds and ophiolitic diamonds.     

Using a global reference sample set and a cropland map for area estimation in China

A technically transparent and freely available reference sample set for validation of global land cover mapping was recently established to assess the accuracies of land cover maps with multiple resolutions. This sample set can be used to estimate areas because of its equal-area hexagon-based sampling design. The capabilities of these sample set-based area estimates for cropland were investigated in this paper. A 30-m cropland map for China was consolidated using three thematic maps (cropland, forest and wetland maps) to reduce confusion between cropland and forest/wetland. We compared three area estimation methods using the sample set and the 30 m cropland map. The methods investigated were: (1) pixel counting from a complete coverage map, (2) direct estimation from reference samples, and (3) model-assisted estimation combining the map with samples. Our results indicated that all three methods produced generally consistent estimates which agreed with cropland area measured from an independent national land use dataset. Areas estimated from the reference sample set were less biased by comparing with a National Land Use Dataset of China (NLUD-C). This study indicates that the reference sample set can be used as an alternative source to estimate areas over large regions.     

A simplified design method for metallic dampers used in the transverse direction of cable-stayed bridges

The aseismic design of cable-stayed bridges in the transverse direction with newly proposed metallic dampers that can accommodate both longitudinal and transverse movement of the deck has recently been considered. This work focuses on developing a simplified method to design an appropriate metallic damper. The seismic performance of cablestayed bridges with different damper stiffness, main span lengths, tower shapes and types of deck in the transverse direction are investigated. The transverse displacement of the deck of a cable-stayed bridge increases significantly with the increment of the damper stiffness, which proves that the design of the damper stiffness is crucial. A simplified model considering the damper stiffness, cable system and tower in the transverse direction is developed to evaluate the period and lateral displacement of a complicated cable-stayed bridge. Based on the simplified model, a design method is proposed and assessed using two cable-stayed bridges as examples. The results show that metallic dampers can be designed with high efficiency, and the optimal ductility of the damper can be selected.     

Study of seismic behavior of PHC piles with partial normal-strength deformed bars

Nine PHC piles with partial normal-strength deformed bars were prepared in present study, and cyclic loading tests were implemented to evaluate these piles’ seismic performance. The influence of the axial compression ratio and the amount of normal-strength deformed bars on failure modes, crack patterns, strength, stiffness, and ductility were examined. The test findings indicate that the change of axial compression ratio has a noticeable influence on the failure mode of PHC piles. A larger axial compression ratio results in a higher cracking bending resistance, ultimate bending resistance, and initial stiffness, but the propagation heights of flexural cracks decrease as the axial compression ratio increases. Furthermore, increasing the amount of normal-strength deformed bars causes a slight decrease in ductility. Finally, a calculation formula was proposed to predict the flexural capacity of PHC piles with partial normal-strength deformed bars.     

基于误差分布估计的三峡水库入库洪水概率预报方法

准确、及时的入库洪水预报,对三峡水库综合效益的发挥和长江流域水旱灾害防御、水资源利用、流域综合管理等具有重要作用。基于预报误差的最优分布估计和分布函数动态参数假定,提出了一种三峡水库入库洪水概率预报方法,并进行了洪水概率预报业务试验。结果表明:本文所提方法科学可行,计算快捷,使用方便,便于在实时作业预报中应用推广;概率预报结果较确定性预报结果,在水量预报、预警效果等方面均有所改善,1～5 d预见期预报的确定性系数提高0.1%～3.4%,水量误差减少0.1%～4.8%,可为三峡水库实时调度提供更可靠的预报信息;所提出的三峡水库入库洪水概率预报业务化产品,可提供更多风险信息,为三峡水库的科学调度,尤其是洪水资源化利用提供更好的优化决策支撑。     

基于走航高频监测的水库冬季水体溶解甲烷浓度分布:以湖北西北口水库为例

水库是大气甲烷(CH4)的重要来源之一,但目前对水库(尤其是河道型水库)中溶解CH_4浓度及释放潜力的空间异质性的认识仍不足.为揭示河道型水库冬季溶解CH_4浓度的分布规律,于2020年1月在湖北宜昌黄柏河流域内西北口水库采用自主研发的新型快速水—气平衡装置(FaRAGE)连接便携式温室气体分析仪,开展了水体溶解CH4浓度的连续走航式监测及断面垂向监测.根据溶解CH4从库尾至库首的浓度变化可以将水库分为3段:距回水末端1 km内为快速降低段,溶解CH4浓度范围为0.117～0.233 μmol/L;1～6 km内为缓慢降低段,CH4浓度范围为0.055～0.117 μmol/L;6～13km范围内为浓度平稳段,CH4浓度范围为0.039～0.080 μmd/L.整体上,水库表层水体溶解CH_4浓度与表层水温、水深及距回水末端的距离呈显著负相关关系(r=-0.77、-0.89、-0.81;P0.01),与叶绿素a浓度、溶解氧浓度呈显著正相关性(r=0.95、0.97;P0.01).基于当月平均风速,采用薄边界层法估算了上述3段区域的DH_4扩散通量,分别为(0.023±0.004)、(0.012±0.003)、(0.007±0.001) mg/(m~2·h).西北口水库在冬季表现为向大气释放CH_4的"源",且由于溶解CH_4浓度分布不均而表现出较强的空间差异性.     

Characteristics of rock fragments in different forest stony soil and its relationship with macropore characteristics in mountain area,northern China

Rock fragments have major effect on soil macropores and water movement. However, the characteristics of rock fragments and their relationship with macropore characteristics remain elusive in forest stony soils in northern mountainous area of China. The objectives of this study are to (1) use Industrial Computed Tomography (CT) scanning to quantitatively analyze rock fragment characteristics in intact soil columns in different forest lands and (2) identify the relationship between characteristics of rock fragments and that of the macropores. Intact soil columns that were 100 mm in diameter and 300 mm long were randomly taken from six local forest stony soils in Wuzuolou Forest Station in Miyun, Beijing. Industrial CT was used to scan all soil column samples, and then the scanned images were utilized to obtain the three-dimensional (3D) images of rock fragments and macropore structures. Next, the parameters of the rock fragments and macropore structure were measured, including the volume, diameter, surface area, and number of rock fragments, as well as the volume, diameter, surface area, length, angle, tortuosity and number of macropores. The results showed that no significant difference was found in soil rock fragments content in the 10-30 cm layer between mixed forest and pure forest, but in the 0-10 cm soil layer, the rock fragments in mixed forest were significantly less than in pure forest. The number density of macropores has significant negative correlation with the number of rock fragments in the 0-10 cm soil layer, whereas this correlation is not significant in 10-20 cm and 20-30 cm soil layers. The volume density of macropore was not correlated with the volume density of rock fragments, and there is no correlation between the density of macropore surface area and the density of rock fragment surface area. Industrial CT scanning combined with image processing technology can provide a better way to explore 3D distribution of rock fragments in soil. The content of rock fragments in soil is mainly determined by parent rocks. The surface soil (0-10 cm) of forest contains fewer rock fragments and more macropores, which may be caused by bioturbation, root systems, gravitational settling and faunal undermining.     

The design and implementation of a ROACH2+GPU based correlator on the Tianlai dish array

A digital correlator is a crucial element in a modern radio telescope. In this paper, we describe a scalable design for the correlator system of the Tianlai pathfinder array, which is an experiment dedicated to testing key technologies for conducting a 21 cm intensity mapping survey. The correlator implements the FX design, which firstly performs a fast Fourier transform(FFT) including polyphase filter bank(PFB) computation using a Collaboration for Astronomy Signal Processing and Electronics Research(CASPER) Reconfigurable Open Architecture Computing Hardware-2(ROACH2) board, then computes cross-correlations by employing Graphics Processing Units(GPUs). The design has been tested both in laboratory and in actual observation.     

桐柏——大别山主要构造热事件及40Ar/39Ar地质定年研究

桐柏——大别山是一条复合造山带。在其演化过程中曾经历了扬子旋回（1000Ma-761Ma）和加里东旋回（470Ma-401Ma）两个板块构造旋回的俯冲-碰撞造山作用，之后又经历了早、中华力西（357Ma-314Ma）的平移走滑和晚华力西（286Ma-261Ma）、印支期（224Ma-185Ma）、燕山期（130Ma-111Ma）逆掩或逆冲推覆的陆-陆叠覆造山作用。印支期的高压超高压变质岩系是在陆-陆叠覆造山作用下形成的。燕山期的造山不仅具显著的深层次构造岩浆作用特点，而且还伴随快速的隆升作用。