Occurrence of Free-Gas Associated with Methane-Hydrate-Bearing Formations in the MITI Nankai Trough Wells, Offshore Tokai, Japan

Abstract. The MITI Nankai Trough wells were drilled for exploration of methane-hydrate-bearing sediments in association with seismic inferred bottom simulating reflectors (BSRs). In this project, log data showed low velocity compressional-wave (P-wave) layers below methane-hydrate-bearing formations. Dipole shear sonic acoustic tools (DSI) could not acquire accurate compres-sional velocity in this zone, thus it was not possible to accurately correlate between logging, VSP and surface seismic profiles.
Small amount of gas was presumed to cause the problem in obtaining the low velocity P-wave data. VSP interval velocity data was used to assess the DSI inferred low-velocity layer, which showed lower values than the velocity of the drilling muds. Synthetic seismogram was created by VSP-compensated velocity to compare against corridor stack of VSP. As a result, the depths above and below the methane-hydrate-bearing interval were correlated with synthetic seismograms and reflectivity events on the VSP profiles. By using this correlation technique, distribution of methane-hydrate-bearing formations and free-gas-bearing formations can be determined.     

Geology of the Kokchetav UHP-HP metamorphic belt, Northern Kazakhstan

Abstract Ultrahigh-pressure metamorphic (UHPM) rocks of the Kokchetav Massif of Kazakhstan contain metamorphic microdiamond and coesite inclusions inside rigid capsules such as garnet and zircon. Precambrian protoliths of the UHPM rocks were metamorphosed at around 530 Ma, at pressures of about 7 GPa, which suggests that crustal protoliths were subducted to depths of over 200 km. Primary UHPM minerals are poorly preserved due to partial obliteration by subsequent Barrovian overprint during exhumation and later collision events in Caledonian times. We report the results of detailed mapping of the Kokchetav Massif and use structural data to propose intrusion and exhumation mechanisms for the UHPM rocks. Detailed mapping revealed that many subvertical structures in the ultrahigh-pressure–high-pressure (UHP–HP) units were formed due to later folding. The primary structure appears to be subhorizontal and the total thickness of the UHP rocks is estimated at around 2 km. The first order structure is sandwich-like; that is, the UHP–HP units are separated from underlying low-P metamorphic rocks of the Daulet Series and from feebly metamorphosed to unmetamorphosed sedimentary strata on the top by subhorizontal faults. Kinematic indicators show top-to-the-south sense of shear along the top, and top-to-the-north displacement along the bottom boundaries. These shear senses, together with the observed metamorphic gradients, suggest that the thin UHPM sheet was extruded toward the north. We consider wedge extrusion to have been the most effective mechanism for the exhumation of the UHPM rocks.     

Oceanographic variations over the last 150,000 yr in the Japan Sea and synchronous Holocene with the Northern Hemisphere

The paleo-hydrography in the Japan Sea called a “mini-Ocean” was reconstructed based on the high-resolution analysis of diatom assemblages over the period of 150,000 yr. The decrease of diatom fertilization in the Japan Sea, when it was isolated from surrounding seas due to the drop of sea-level during the glacial to stadial phase, resulted in dissolution and/or extremely low diatom production in the northern cores in the subarctic water-masses. The annual Td′-derived paleo-SSTs (°C) were controlled by the fluctuations of 2-kyr and 4-kyr periods at intervals of 20 kyr and 40 kyr over the last 160 kyr BP, respectively. A 23-kyr cycle is recognized during the periods from 140 ka to 100 ka, according to the Wavelet analysis. After temperature and sea-level increased both at 133–128 ka, 60–53 ka and 15–10 ka, oceanic warm-water diatom species predominated at 127–119 ka and after 9 cal ka in the interstadial phase. At 21.3–16.9 ka and 12.9–9.8 ka, sea-level and salinity increased as the transgression developed. At 10.0–7.0 ka, the oceanic association shifted from cold-water species in the stadial period to warm-water ones in the interstadial phase. The fluctuations of Td′ derived-SSTs (°C) on century to millennial time-scales during the Holocene are well correlated with abrupt climatic events that different paleoclimatic proxies record in many regions of the Northern Hemisphere.     

Distribution and sources of organic matter in surficial sediments on the shelf and slope off Tokachi, western North Pacific, inferred from C and N stable isotopes and C / N ratios

Organic carbon (C) and total nitrogen (N) contents and corresponding isotope ratios were determined in surficial sediment (0–3 cm) at 94 stations ranging from 21 to 1995 m water depth off Tokachi, Hokkaido, Japan, to elucidate the distribution and source of sedimentary organic matter. Suspended particulate organic matter (POM) in the seawater and suspended POM and sediment in the Tokachi River were also examined. δ¹³C, δ¹⁵N and C / N ratios of the samples in the Tokachi River suggest that the spring snowmelt is an important process for the transport of terrestrial organic matter to the coastal waters. δ¹³C values of suspended POM in the surface seawater were higher in May and November than in August, while δ¹⁵N values of the POM were higher in May and August than in November. These changes are attributed to seasonal changes in phytoplankton growth rate and nitrate availability. δ¹³C and δ¹⁵N values in the sediments off Tokachi were lowest near the Tokachi River mouth, and increased offshore to constant values that persisted from 134 to 1995 m water depth. The spatial variation in C / N ratios in the sediment mirrored those of δ¹³C and δ¹⁵N. Comparison of δ¹³C, δ¹⁵N and C / N ratios in the sediments off Tokachi with those in the Tokachi River and seawater indicates that about half of the organic matter in the sediment was of terrestrial origin near the Tokachi River mouth, and the sedimentary organic matter from 134 to 1995 m water depth was of marine origin. The organic C content in the sediment was high near the Tokachi River mouth, and also around 1000 m water depth. The C content was significantly correlated with silt plus clay content, with different regression lines for those stations shallower and deeper than 134 m, owing to several stations of higher C content with the elevated C / N ratio on the inner shelf. These results suggest that transport and deposition of organic-rich fine sediment particles by hydrodynamic processes were major factors controlling C content off Tokachi. In addition, the supply of a fraction of terrestrial organic matter with high C / N probably also affected C content on the inner shelf.     

Variation of Spectral Radiance of the Zenith Sky During the Annular Eclipse on May 21, 2012

The absolute brightness of the zenith sky was measured using a simple calibrated spectrometer during the annular solar eclipse event on May 21, 2012 in Fujioka City, Japan (36.2924°N, 139.0823°E). The sensitivity of the spectrometer was calibrated as a function of wavelength between 400 and 700 nm with an integral sphere. The brightness of the sky decreased to 6 % of its usual condition at the maximum magnitude of the annular eclipse of 0.95 for all wavelengths. The curve describing the variation of sky brightness accords well with the total luminosity of the solar disk estimated by a simple model that accounts for the limb darkening effect. This study provides zenith sky radiance as a function of wavelength and solar elevation angle, which is useful for the investigation of new optical instruments for atmospheric studies.     

Sequential processes in a landslide hazard at a slate quarry in Okayama,Japan

The 12 March 2001 landslide at a slate quarry in Okayama, Japan killed three workers. Composite studies based on field surveys of the landslide slope, interviews with local residents and quarry workers, and inspections of hydrological and seismological data have been used to clarify the causes of this slide and its movements. The results indicate that the landslide was enabled firstly by the steepness of the slope, which had been undercut by river; secondly, the structure was that of a dip-slope that was prone to deep-seated slides along bedding planes; thirdly, numerous joints and faults were present. Surprisingly, rainfall, earthquakes, and explosions do not appear to have played any role in the triggering of this slide. The interviews demonstrated that the frequency of precursory failures increased over a period of several hours before the 12 March 2001 landslide. Inspection of the seismograph records and the eyewitness evidence both indicate that the main part of the landslide consisted of two phases of slope failure within 23 s. After the slide, the frequency of the failures gradually decreased with time over a period of several days. Three new terms are proposed for landslides: foreslide, mainslide, and afterslide, following the terms foreshock, main shock, and aftershock used in seismology.     

Concept and performance testing of a high‐capacity oil damper comprising multiple damper units

There has been a significant increase in the size of building structures in recent years. Huge structures such as high‐rise buildings and large‐domed stadiums require high‐performance structural control, including the use of high‐capacity dampers, especially in an earthquake‐prone country like Japan. The objective of the present study was the enhancement of both human and structural safety in such structures through the development of a rate‐dependent type of damper with a high damping capacity. Among the various available types of rate‐dependent dampers, the authors focused on the oil damper owing to its stable performance against long‐duration vibrations. The target maximum damping force was 6000 kN, which is higher than that of any existing oil damper utilized in building structures. The authors developed a novel concept for achieving this high capacity while maintaining the size of the damper within acceptable dimensions from an architectural point of view. The concept involves the use of multiple damper units that produce mechanically parallel damping forces spatially arranged in series. As a prototype, a 1500‐kN oil damper was fabricated by combining three 500‐kN dampers. The 1500‐kN prototype damper was conceived as a full‐scale prototype of a damper that is more slender than comparable commercially available dampers in Japan, and as a scaled model of the proposed 6000‐kN damper. Sinusoidal loading tests were conducted on the prototype damper using a frequency range of 0.1–1.5 Hz and a velocity range of 0.4–300 mm/s. The results confirmed that the damper produced the design damping forces. The results of earthquake loading tests also revealed that the damper exerted a stable damping force against a large earthquake and maintained its performance after the earthquake. The damper is particularly effective against earthquakes with long‐period components that could increase the temperature of a damper. This is afforded by its high heat capacity compared to conventional dampers. Considering that the proposed 6000‐kN damper will generate a damping force that is about 2–3 times that of the strongest conventional oil damper, existing manufacturer test machines would be inadequate for evaluating its full performance characteristics. To address this issue, the authors also propose a test method for evaluating the overall damping force. The method is premised on the fact that the characteristic feature of the proposed damper is its combination of multiple damper units. The overall performance is thus evaluated using the test results for the individual damper units while the other dampers are bypassed. This method was verified by the results of the abovementioned sinusoidal loading tests, with the error for the 1500‐kN prototype damper found to be less than 5%. Copyright © 2016 John Wiley & Sons, Ltd.     

Age compositions of flatfish stocks as determined by a new otolithometric method, its application in the estimation of growth, spawning potential and fisheries management

We developed an ageing methodology and examined age composition of three flatfish stocks inhabiting the Seto Inland Sea, Japan. Ages were difficult to determine for three-lined tongue sole (Cynoglossus abbreviates) and ridged-eye flounder (Pleuronichthys cornutus) because the first year annulus ring was often indistinct; therefore, we used directional change in otolith growth to distinguish it. Sectioning and etching methods were powerful tools for identifying annual checks for red tongue sole (Cynoglossus joyneri). Using these ageing methods, we determined age–length relationships and growth curves. The age composition of the populations studied and of the landings showed that a large proportion of the latter consisted of individuals under the mean age of sexual maturity, thereby reducing the percent spawning potential ratio (%SPR) to ≈ 20% for all species. These findings suggest that fishing pressure on immature fish is leading to overfishing of these flatfish stocks.