含典型裂纹系硬包体复合模型的应力场及破裂特征

针对硬包体孕震模式力学机制研究，分别对含雁行裂纹系及组合裂纹系的硬包体复合模型，在单轴压力作用下的应力场及破裂特征作了实验研究和比较．结果表明，在硬包体中，逆向雁行裂纹系和T形裂纹系是孕育强震并易于发震的有利地质构造．      

DSQ型短基线水管倾斜仪及标定装置的研制

阐述了具有国产化、小型化、数字化、智能化特点的DSQ型短基线水管仪的原理、结构与性能指标 ,并介绍了该仪器在 7个试验台 8条短基线上的试验与监测记录、精度估算结果。在全国 30多个台站与朝鲜平壤大成山地震台的推广证明 :该仪器在小于或等于 5m的洞体基线上均能取得清晰、光滑、令人满意的倾斜固体潮汐观测结果 ,成功率达 10 0 % ,精度达当今国际同类先进水平。     

植物生长刺激素对细基江篱生长的影响

在原来研究的基础上,进一步用不同浓度的赤霉素、2.4-二氯苯氧乙酸、β-吲哚乙酸、丰产素、α-奈乙酸、三十烷醇和秋水仙素处理了细基江篱3小时,然后在浮箋上进行人工栽培,井和未处理的藻体进行比较。结果比对照组有了不同程度的增产,由12.1％到83.6％的并找出了各种药物处理江篱的较佳浓度。为今后在江篱生产的应用上提供了重要的科学依据。     

Development of a new photon diffraction imaging system for diagnostic nuclear medicine

The objective of this project is to develop and construct an innovative imaging system for nuclear medicine and molecular imaging that uses photon diffraction and is capable of generating 1–2 mm spatial resolution images in two or three dimensions. The proposed imaging system would be capable of detecting radiopharmaceuticals that emit 100–200 keV gamma rays which are typically used in diagnostic nuclear medicine and in molecular imaging. The system is expected to be optimized for the 140.6 keV gamma ray from a Tc-99m source, which is frequently used in nuclear medicine. This new system will focus the incoming gamma rays in a manner analogous to a magnifying glass focusing sunlight into a small focal point on a detector's sensitive area. Focusing gamma rays through photon diffraction has already been demonstrated with the construction of a diffraction lens telescope for astrophysics and a scaled-down lens for medical imaging, both developed at Argonne National Laboratory (ANL). In addition, spatial resolutions of 3 mm have been achieved with a prototype medical lens. The proposed imaging system would be comprised of an array of photon diffraction lenses tuned to diffract a specific gamma ray energy (within 100–200 keV) emitted by a common source. The properties of photon diffraction make it possible to diffract only one specific gamma ray energy at a time, which significantly reduces scattering background. The system should be sufficiently sensitive to the detection of small concentrations of radioactivity that can reveal potential tumor sites at their initial stages of development. Moreover, the system's sensitivity would eliminate the need for re-injecting a patient with more radiopharmaceutical if this patient underwent a prior nuclear imaging scan. Detection of a tumor site at its inception could allow for an earlier initiation of treatment and wider treatment options, which can potentially improve the chances for cure.     

准噶尔盆地东部石炭系火山岩气藏石油地质特征及有利勘探方向分析

准噶尔盆地火山岩油气勘探取得重大进展。笔者经综合研究,提出影响该区天然气藏形成的石油地质主要特征是：前陆坳陷控制了烃源岩区域展布,后碰撞火山岩是主要的储层,古生代晚期的构造优化了储层物性并形成圈闭。松喀尔苏组为前陆坳陷磨拉石建造的近端粗碎屑岩沉积,是克拉美丽造山事件后快速沉积产物,作为主要烃源岩的下石炭统滴水泉组,是与松喀尔苏组同期前陆坳陷不同位置的沉积层系,滴水泉组是前陆坳陷中央的细粒沉积层系。后碰撞火山岩覆盖在前陆坳陷沉积层系之上,分布广泛,分布范围不受古生代造山带和现今构造单元控制。二叠纪发育断陷构造,形成凹隆相间的构造格局,在构造高部位的隆起区石炭系火山岩风化壳和构造裂缝,优化改善了火山岩储层的储集性能,形成有利油气运移通道和储集空间。克拉美丽山南缘的前陆坳陷中央为有利烃源岩分布区,该范围内的构造高部位的火山岩发育区,将是准噶尔盆地东部下一步火山岩油气藏勘探的有利区域。     

海洋生物DNA条形码研究现状与展望

海洋生物种类多样,分布广泛,具有复杂性、多样性和趋同性等特点,为了对物种进行更快速、准确地鉴定,急需在传统形态分类学基础上,建立并结合便捷准确的分子鉴定手段。DNA条形码提供了可信息化的分类标准和有效的分类学手段,已成为近年来分类学与生物多样性研究中重要的技术依托。本文概述了DNA条形码当前的发展现状与趋势,并介绍了DNA条形码技术在主要海洋浮游植物(红藻、褐藻、绿藻、硅藻、甲藻)、无脊椎动物(海绵动物、刺胞动物、甲壳动物和软体动物等)和鱼类中的研究进展,以及不同条形码基因针对于不同生物类群的有效性和适用性,指出了目前条形码技术在各海洋类群中存在的主要问题,并对未来的相关工作做了展望,希望为今后我国的海洋生物DNA条形码研究提供理论基础。     

Correlation and path analysis of morphological and weight traits in marine gastropod Glossaulax reiniana

Using correlation and path analysis, the genetic correlation between weight traits and morphological traits was determined in the marine gastropod Glossaulax reiniana. A total of 100 G. reiniana individuals from a wild population were used. Shell width （X1）, shell height （X2）, umbo-callus height （X3）, body width （X4）, operculum length （X5）, operculum width （X6）, body weight （Y1） and soft-tissue weight （Y2） were measured, and the correlation coefficient matrix calculated. Morphological traits were used as independent variables and weight traits as dependent variables for path coefficient analysis. Path coefficients, correlation indices and determination coefficients were also determined. Results indicate that the correlation coefficients associated with each morphological and weight trait were all highly significant （P〈0.01）. After deleting redundant independent variables, the following optimum multiple regression equations were obtained using stepwise multiple regression analysis： Y1=-29.317＋0.362X2＋0.349X4＋ 1.190）（5 for body weight; and Y2=-17.292＋0.166X1＋0.171X2＋0.703X5, for soft-tissue weight. Operculum height had the highest positive direct correlation with both body weight and soft-tissue weight, which was in accordance with the test results obtained from determinate coefficient analysis. The indication of high genetic correlations between weight traits and morphological traits will provide valuable information for G. reiniana breeding programs.     

A fast integral equation solver for 3D induction well logging in formations with large conductivity contrasts

Simulation of induction logging responses in formations with large conductivity contrasts is an important but challenging problem due to the singularity of a linear system caused by large contrasts. Also, three‐dimensional (3D) analysis of complex geophysical structures usually encounters high computational demands. In this paper, a pre‐corrected fast Fourier transform (pFFT)‐accelerated integral equation method is applied to overcome these difficulties. In the approach, the entire formation is included in the solution domain. The volume integral equation is set up in the region based on the fact that the total field is the summation of the excitation field and the secondary field. The emitted field by the transmitter coil (treated as a magnetic dipole) is regarded as the excitation of the system. Then the method of moments (MoM) is used to solve the integral equation. To reduce the high computational requirements of the MoM, the pFFT method is used to speed up the solution of the matrix equation and reduce the memory requirement as well. The resultant method is capable of computing induction logging problems involving large and complex formations. For problems with high conductivity contrasts, the solution of the matrix equation usually converges very slow or even fails to converge due to the large condition number of the coefficient matrix. To overcome this difficulty, an incomplete LU pre‐conditioner is used to significantly speed up the convergence of the matrix equation, thus further reducing the computation time. Numerical results show that the present method is efficient and flexible for 3D simulation of induction logging and is specifically superior for problems with high conductivity contrasts.     

东乌旗中铁陨石硅酸盐地球化学特征及对成因的启示

东乌旗中铁陨石为1995年在内蒙发现的、为数不多的降落型中铁陨石,由金属—硫化物和硅酸盐相紧密混合而成。硅酸盐相由角砾部分（主要为角砾状橄榄石和辉长岩岩屑）和非角砾部分组成。岩相学特征、主量元素成分及REE地球化学特征表明角砾状橄榄石、非角砾橄榄石和辉长质硅酸盐（辉长岩岩屑和除橄榄石外的非角砾部分）三者可能分别结晶自不同的岩浆源区。进一步的分析表明Mg含量非常高的角砾状橄榄石可能来自一个分异小行星的橄榄岩质地幔,非角砾橄榄石和辉长质硅酸盐可能和HED陨石具有相同的母体Vesta小行星。冲击碰撞导致两个小行星的物质发生了混合。冲击作用产生的高温（约1200℃—1450℃）使得被撞击小行星表壳玄武质和辉长质岩石发生混合重熔,熔体结晶后形成中铁陨石的辉长质硅酸盐。该温度下非角砾橄榄石和角砾状橄榄石均未发生重熔。该模型较好地解释了角砾状橄榄石、非角砾橄榄石和辉长质硅酸盐三者之间的不平衡现象。