The abundances of titanium,zirconium and hafnium in stony meteorites

The concentrations of Ti, Zr and Hf have been determined, by a stable isotope dilution method, in 27 chondrites, seven achondrites and standard rock samples BCR-1 and W-1.Among all chondrites investigated, enstatite chondrite Abee is lowest in Ti atomic ratio compared with Si while all carbonaceous chondrites show higher values. The Zr contents are higher in CII and CIII chondrites, relative to the other groups of chondrites. There is a clustering of Ti and Zr within each group. The $\text{Zr}\text{Hf}$ ratios in CII, CIII. E and H chondrites are essentially the same, while that in the CI chondrite is lower and in L, LL and unequilibrated chondrites are higher.The concentrations of Ti, Zr, Hf and $\text{Ti}\text{Zr}$, $\text{Zr}\text{Hf}$ ratios in achondrites are variable, even among members of the same group.Based on these results, condensation models for these elements are discussed. The variable results for Ti, Zr and Hf in achondrites may be due to the reheating recrystallization and metamorphic processes.‘Cosmic atomic abundances’ of Ti, Zr and Hf are calculated as 2470, 11.2 and 0.185. respectively for Si = 10⁶ atoms.     

Trace Element Analysis of Fused Whole-Rock Glasses by Laser Ablation-ICP-MS and PIXE

The concentrations of fifty trace elements, including relatively volatile elements and transition metal elements, in fused glasses of Geological Survey of Japan rock reference materials GSJ JR-2, JA-1, JA-2, JB-1a, JB-3, JGb-1 and JF-1 were determined by particle (proton) induced X-ray emission (PIXE) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The fused glasses were prepared by rapid fusion and subsequent quenching in welded platinum capsules and were found to be homogeneous for major elements and for trace elements with concentrations of more than 1 μg g^-1 within the observed precision (± 10% mean) on a 70 μm sampling scale. The values obtained by PIXE and LA-ICP-MS for the transition elements (Cr, Mn, Fe, Ni and Cu), the relatively volatile elements (Zn, Ga, Rb and Pb) and the refractory elements (Y, Zr, Nb and Th) with concentrations greater than a few μg g^-1 showed good agreement (within 10 % relative difference). The values for almost all the elements detected at concentrations higher than 1 μg g^-1 as determined by LA-ICP-MS also agreed well with the reference values (mean relative difference < ± 10%), except for B and Cu. The good agreement confirmed the appropriateness of the NIST SRM 600 series glass calibration reference material for LA-ICP-MS analysis of glasses with variable major-element compositions for almost all elements. The concentrations of Cu in all the samples were lower than the reference values, which was attributed to adsorption of the transition metals onto the platinum capsule during preparation.     

Determination of water balance equation components in irrigated agricultural watersheds using SWAT and MODFLOW models : A case study of Samalqan plain in Iran

Increasing water demands,especially in arid and semi-arid regions,continuously exacerbate groundwater as the only reliable water resources in these regions.Samalqan watershed,Iran,is a groundwater-based irrigation watershed,so that increased aquifer extraction,has caused serious groundwater depletion.So that the catchment consists of surface water,the management of these resources is essential in order to increase the groundwater recharge.Due to the existence of rivers,the low thickness of the alluvial sediments,groundwater level fluctuations and high uncertainty in the calculation of hydrodynamic coefficients in the watershed,the SWAT and MODFLOW models were used to assess the impact of irrigation return flow on groundwater recharge and the hydrological components of the basin.For this purpose,the irrigation operation tool in the SWAT model was utilized to determine the fixed amounts and time of irrigation for each HRU(Hydrological Response Unit)on the specified day.Since the study area has pressing challenges related to water deficit and sparsely gauged,therefore,this investigation looks actual for regional scale analysis.Model evaluation criteria,RMSE and NRMSE for the simulated groundwater level were 1.8 m and 1.1%respectively.Also,the simulation of surface water flow at the basin outlet,provided satisfactory prediction(R²=0.92,NSE=0.85).Results showed that,the irrigation has affected the surface and groundwater interactions in the watershed,where agriculture heavily depends on irrigation.Annually 11.64 Mm3 water entered to the aquifer by surface recharge(precipitation,irrigation),transmission loss from river and recharge wells 5.8 Mm3 and ground water boundary flow(annually 20.5 Mm³).Water output in the watershed included ground water extraction and groundwater return flow(annually 46.4 Mm³)and ground water boundary flow(annually 0.68 Mm³).Overally,the groundwater storage has decreased by 9.14 Mm3 annually in Samalqan aquifer.This method can be applied to simulate the effects of surface water fluxes to groundwater recharge and river-aquifer interaction for areas with stressed aquifers where interaction between surface and groundwater cannot be easily assessed.     

PETROLOGY OF THE YAMATO METEORITES (j), (k), (l), AND (m) FROM ANTARCTICA*

The Yamato (j), (k), (l), and (m) meteorites collected from near the Yamato Mountains in December, 1973, are respectively an H-4 and L-5 chondrite, a howardite, and an L-5 chondrite. Yamato (l), the howardite, is a polymict breccia of diogenite and eucrite clasts. Olivine in the chondrites ranges in composition from Fo₇₅ to Fo₈₀, whereas in the howardite, where it is rare, the composition is about Fo₆₀. Pyroxenes in the chondrites are mostly orthopyroxenes and (En₈₃), while the pyroxenes in the howardite are more complex, comprising orthopyroxene, pigeonite, augite, and rare clinohypersthene (in the order of decreasing abundance), with the range from En₈₀ to En₃₇. They form a definite trend, probably formed by the fractional crystallization of the parental magma of the achondrite, and later subjected to exsolution phenomena during the slow cooling. Plagioclase is high-temperature oligoclase in the chondrites, and anorthite in the howardite. Maskelynitization is sometimes observed. Other shock effects are also observed. Opaque phases consist mostly of nickel-iron, troilite, chromite, and rarely ilmenite. Intergrowth of these minerals are common. The accessory minerals comprise quartz, cristobalite, apatite, spinel, and rare uranium-bearing minerals. The bulk composition and genetic significance are discussed.     

Accelerator measurement of NaI response to medium energy neutrons and application to a Satellite-Borne Spectrometer

We report on the response of a prototype detector to medium energy neutrons. The neutrons were produced by n-p scattering of a neutron beam on a hydrogen target. The measurements provide unique data on the efficiency and response of large NaI scintillators to neutrons in the energy range 36–709 MeV. We apply the results to the high-energy mode of the Gamma-Ray Spectrometer (GRS) on the Solar Maximum Mission satellite by estimating its efficiency for neutron detection. This estimate is compared to earlier Monte Carlo calculations of the GRS efficiency.     

Quantitative trace element analysis of single fluid inclusions by proton-induced X-ray emission (PIXE): application to fluid inclusions in hydrothermal quartz

Single fluid inclusion analogues with known elemental composition and regular shape were analyzed for trace element contents by particle-induced X-ray emission (PIXE)—a nondestructive method for the analysis of single fluid inclusions—to evaluate the accuracy and detection limits of this type of analysis. Elements with concentrations of 10 to 1000 ppm were measured with average estimated relative error of ±7%. For natural fluid inclusions with 30 μm radius and 20 μm depth in quartz, the total analytical errors were estimated to be ±40% relative for Ca, ±16% for Fe, ±13% for Zn, ±12% for Sr, and ±11% for Br and Rb, by considering uncertainties in microscopic measurements of inclusion depths. Detection limits of 4 to 46 ppm for elements of mass numbers 25-50 were achieved for analyses of a spherical fluid inclusion with 30 μm radius and 20 μm depth in quartz, at an integrated charge of 1.0 μC. The trace element compositions of single fluid inclusions in a hydrothermal quartz crystal were also determined. The elemental concentrations in the inclusions varied widely: 0.2-9 wt.% for Ca and Fe, 300-8000 ppm for Mn and Zn, 40-3000 ppm for Cu, 100-4000 ppm for Br, Rb, Sr, and Pb, and less than 100 ppm for Ge. Elemental concentrations of secondary fluid inclusions on the same trail varied over an order of magnitude, even though all these inclusions were formed from the same fluid. Elemental concentrations in inclusions on the same trail are positively correlated with each other, except for Cu and Rb. Ratios of almost all elements in the inclusions on the trail were essentially unchanged; thus, the elemental ratios can provide original information on trace element compositions of a hydrothermal fluid.     

Study on the manganese nodule V. Thermal studies of the iron-manganese phase

The thermal phase transformation of the iron-manganese phase of the Pacific Ocean manganese nodules were studied by the differential thermal and X-ray diffraction methods. X-ray powder patterns of the heated samples at the temperature of 600°C to 1000°C show the occurrence of hematite, bixbyite and cubic and tetragonal (Fe, Mn)₃O₄. Bixbyite produced by the heat treatment of the iron-manganese phase gives an abnormal X-ray pattern in comparison with the standard sample of bixbyite. Cubic (Fe, Mn)₃O₄ is produced not only by the reaction of bixbyite with hematite over 900°C, but also at the lower temperature, such as 600°C. While, tetragonal (Fe, Mn)₃O₄ is a reaction product of cubic (Fe, Mn)₃O₄ with bixbyite over 900°C in the case of manganese rich nodules. The species and quantities of the products after the heat treatment are assumed to be mostly influenced by the relative contents of iron and manganese in the manganese nodule.     

The typology of the American metropolis: monocentricity,polycentricity, or generalized dispersion?

Although the spatial structure of employment in large US metropolitan regions is a well-researched topic, few studies focus on medium-sized and small US metropolitan regions. Consequently, there is no overall typology relating small-to-medium urban form to employment distribution. We address this gap by investigating the spatial structure of employment in 356 metropolitan regions. We conceptualize six typologies based on three categories that have overlapping properties: “monocentricity,” “polycentricity,” and “generalized dispersion.” The study has three main findings. First, the three types of urban form that we identify as “hybrid” outnumber the three “pure” types by almost four to one. Second, job dispersion is a dominant characteristic in almost 70% of all metropolitan statistical areas (MSAs) (including the hybrid types), and polycentricity (56.7% of MSAs) is somewhat more common than monocentricity. Third, there is a strong relationship between population size and density. The population of medium-sized metropolitan areas is generally more dispersed than that of small and large metropolitan areas. Polycentricy emerges mostly in large metropolitan regions, while monocentrity is found in both small and large metropolitan regions.     

MINERALOGY,PETROGRAPHY AND CHEMISTRY OF THE CHONDRITE,KAMIOMI, SASHIMA-GUN,IBARAKI-KEN,JAPAN

The Kamiomi, Sashima-gun (Iwai-shi), Ibaraki-ken, Japan, chondrite (observed to fall in spring, during the period 1913–6), consists of olivine, orthopyroxene, nickel-iron and troilite with minor amount of plagioclase, clinopyroxene, apatite and chromite. The average molar composition of olivine (Fa₁₉) and orthopyroxene (Fs₁₇) indicates that Kamiomi is a typical olivine bronzite chondrite. From the well-recrystallized texture, the presence of poorly-definable chondrules, homogeneous composition of olivine and absence of glass, this chondrite could be classified in petrologic type 5. The bulk chemical composition, especially, total Fe (27.33%) and metallic Fe (17.00%) as well as Fe_total/SiO₂(0.72), Fe_metal/Fe_total (0–633) and SiO₂/MgO (1.59) support the above conclusion. Coexistence of heavily-shocked olivine grains in the matrix composed of olivines and pyroxenes which suffered from light to moderate shock effect suggest that impacting phenomena, small-scaled but locally strong, occurred on the Kamiomi parent body.