温度、盐度和光照对浒苔生长和光合作用的影响

Intensive Pyropia aquaculture in the coast of southwestern Yellow Sea and its subsequent waste, including disposed Ulva prolifera, was speculated to be one of the major sources for the large-scale green tide proceeding in the Yellow Sea since 2007. It was, however, unclear how the detached U. prolifera responded and resumed growing after they detached from its original habitat. In this study, we investigated the growth and photosynthetic response of the detached U. prolifera to various temperature, salinity and irradiance in the laboratory. The photosynthetic rate of the detached U. prolifera was significantly higher at moderate temperature levels(14–27°C)and high salinity(26–32), with optimum at 23°C and 32. Both low(14°C) and highest temperature(40°C), as well as low salinity(8) had adverse effects on the photosynthesis. Compared with the other Ulva species, U. prolifera showed higher saturated irradiance and no significant photoinhibition at high irradiance, indicating the great tolerance of U. prolifera to the high irradiance. The dense branch and complex structure of floating mats could help protect the thalli and reduce photoinhibition in field. Furthermore, temperature exerted a stronger influence on the growth rate of the detached U. prolifera compared to salinity. Overall, the high growth rate of this detached U. prolifera(10.6%–16.7% d~(–1)) at a wide range of temperature(5–32°C) and salinity(14–32) implied its blooming tendency with fluctuated salinity and temperature during floating. The environmental parameters in the southwestern Yellow Sea at the beginning of green tide were coincident with the optimal conditions for the detached U. prolifera.     

DRY-SEASON VARIABILITY IN SUSPENDED SEDIMENT CONCENTRATIONS IN THE SOUTH PASSAGE OF THE CHANGJIANG ESTUARY

This paper reports the results of continuous monitoring of turbidity, water depth, salinity (using an Optical Backscatter Sensor (OBS)), and current velocity (using a Current meter (SLC9-2)) in the South Passage of the Changjiang Estuary over a spring–neap period in February 2003 (dry season). The turbidity measured via OBS was closely correlated with the suspended sediment concentration (SSC), which was highly variable. Over the study period, the SSC in the middle layer ranged from 110 to 1400 mg/l. The minimum SSC occurred during a late ebb tide, and the maximum SSC occurred during a late flood tide. On average, the SSC was 1.5 times higher during flood tide than during ebb tide. Vertically within the water column, SSC increased downward, with the ratio of SSC measured near the bed to that measured at the surface ranging from 1.90 to 18.3. The temporal variability in SSC is jointly governed by tides and wind-induced waves, whereas the vertical variability in SSC is attributed to the effect of gravity and vertical water circulation.     

Development of the ultrasonic measurement technique and its application in the observation of rock mass stability

Summary A method of measuring ultrasonic wave properties in rocks during the complete stress-strain process is described. The relevant experimental laboratory study, to reveal the change of the amplitude spectrum parameters with strain (or stress) has been carried out. A preliminary study was conducted on the application of the ultrasonic measurement technique at a belt conveyor roadway of the north wing in Baodian coal mine, Shandong province. A borehole ultrasonic device with dry coupling was developed to provide better coupling and more accurate measurement data in comparison with those of a water coupled situation. Based on the interrelations between the complete stress-strain properties of specimens and their wave properties, the structural properties of surrounding rocks, the range of yield zones, and the change of stresses within the rocks surrounding a roadway which was subjected to mining influence of upper longwall face were analysed. Amplitude spectrum parameters were used to give a better prediction of the physico-mechanical state of the surrounding rocks.     

玻璃钢作地面沉降监测标体的可行性研究

玻璃钢具有质量轻、强度高、耐腐蚀等特性,可作为达到特定工程目的的成型材料。本文通过论证,认为在地面沉降监测工程中为了更准确灵敏地反映地下岩土的变形,选用轻质高强度的玻璃钢作引测标体是可行的。此外,由于玻璃钢成本低,因此,还可使中小城市开展地面沉降监测时减少基础性投入。     

江苏近岸紫菜养殖筏架区定生绿藻群落结构及其受控因素

基于2010年10月至2011年4月对苏北紫菜养殖筏架区定生绿藻及环境因素调查数据,分析研究了紫菜筏架上定生绿藻种群结构和数量变化及重要环境因子对其的影响并估算了调查区绿藻总生物量.结果表明,筏架上定生绿藻种类有浒苔(Ulva prolifera)、盒管藻(Capsosiphon groenlandicus)、缘管浒苔(Ulva linza)、肠浒苔(Ulva intestinalis)、条浒苔(Ulva clathrata)和扁浒苔(Ulva compressa).绿藻生物量变化呈倒抛物线型,4月份为主高峰14898吨,11月份为次高峰2034吨,2月份最低,仅为729吨,3-4月份绿藻几乎呈暴发性增长.种类多样性随季节变化有很大差异,养殖筏架刚入海的9、10月份,绿藻种类丰富,生物多样性高;12月至笠年2月,尽管生物量很低,但仍是多种并存;3-4月份随着生物量的猛增,种类多样性降至最低,盒管藻优势地位明显,生物量比例最大能到80%,浒苔比例呈指数增长,达20%～40%.水温对绿藻生物量及种类演替有直接调控作用,在水温< 10℃时,绿藻即能快速生长;而盐度作用不明显.开展紫菜筏架上定生绿藻群落动态变化及其生物量的估算,为追溯南黄海大规模绿潮发源地提供佐证,为绿潮预防和治理提供基础数据支撑.     

滚动轴承内外圈滚道的磁力研磨研究

采用直流励磁装置、磁性磨料及工件共同构成磁加工系统。磁性磨料在磁场的作用下，对轴承内、外圈滚道以磁刷的形式进行研磨。由于磨料的可流动性，加工时既能满足对被加工表面粗糙度的加工要求，又能较好地保持工件原有的形位精度；且加工后在被加工表面形成一定的压应力，使工件的抗疲劳强度提高，使用寿命延长。     

表面粗糙度参数的计算机辅助测量

介绍了一种用９Ｊ型光切法显微镜、６Ｊ型干涉法显微镜及电动轮廓仪，对ＧＢ１０３１—８３定义的表面粗糙度参数（Ｒａ，Ｒｚ，Ｒｙ，Ｓ．Ｓｍ）进行计算机辅助测量的方法。给出了有关计算公式，程序框图与测量实例。     

一种配合物键合异构体的制备及红外光谱测定

制备了配合物键合异构体[Co(NH3)5NO2]Cl2和[Co(NH3)5ONO]Cl2,并用红外光谱测定了它们的结构.     

测距三角高程跨河水准测量的应用

结合大桥工程中跨河水准测量,分别运用常规的测距三角高程法和改进的测距三角高程法进行跨河水准测量,对结果进行比较和研究。