Lunar capture in the planar restricted three-body problem

The capture dynamics is an important field in Astronomy and Astronautics. In this paper, the near-optimal lunar capture in the Earth–Moon transfer is investigated under the frame of the planar circular restricted three-body problem. We try to work out how to achieve the permanent lunar capture with the minimum maneuver consumption. This problem is decomposed into two parts: the pre-maneuver part and the post-maneuver part. In the pre-maneuver part, considering the criteria of the gravitational capture, we obtain the minimum pre-maneuver velocity via the numerical backward integration. In the post-maneuver part, using the Poincaré section and the KAM theory, we find the maximum post-maneuver velocity to achieve the permanent capture. Synthesized the results of the two parts, a new method is presented to find the near-optimal maneuver position and the minimum maneuver consumption. The method presented is simple and visible, and can provide abundant capture orbits for the design of low energy Earth–Moon transfers.     

AEKF在星敏感器低频误差补偿中的应用

高分辨率对地观测卫星需要精确的姿态信息来满足后续对地定位等工作,因此姿态确定精度十分重要。星敏感器的低频误差是影响卫星姿态确定精度的重要因素之一,主要是由空间周期性的热环境变化引起的。为进一步提高卫星姿态确定精度,对星敏感器的低频误差产生机理即星敏感器主光轴做周期性扰动进行了分析,设计了星敏感器低频误差补偿方案,建立了考虑星敏感器低频误差在内的组合定姿模型,利用拓维卡尔曼滤波(AEKF)对低频误差进行补偿,并引入RTS平滑滤波进一步提高姿态确定精度。仿真实验表明,设计的星敏感器低频误差补偿方案能有效对其进行补偿,提高卫星姿态确定精度。     

Enhanced Multi-Layer Fatigue-Analysis Approach for Unbonded Flexible Risers

This paper proposes an enhanced approach for evaluating the fatigue life of each metallic layer of unbonded flexible risers. Owing to the complex structure of unbonded flexible risers and the nonlinearity of the system, particularly in the critical touchdown zone, the traditional method is insufficient for accurately evaluating the fatigue life of these risers. The main challenge lies in the transposition from global to local analyses, which is a key stage for the fatigue analysis of flexible pipes owing to their complex structure. The new enhanced approach derives a multi-layer stress-decomposition method to meet this challenge. In this study, a numerical model validated experimentally is used to demonstrate the accuracy of the stress-decomposition method. And a numerical case is studied to validate the proposed approach. The results demonstrate that the multi-layer stress-decomposition method is accurate, and the fatigue lives of the metallic layers predicted by the enhanced multi-layer analysis approach are rational. The proposed fatigue-analysis approach provides a practical and reasonable method for predicting fatigue life in the design of unbonded flexible risers.     

东海沿岸海域牡蛎体内的重金属含量及其污染评价

利用火焰原子吸收光谱法、石墨炉原子吸收光谱法、冷原子吸收光度法对2007年6月份在东海沿岸海域采集的牡蛎(Ostreasp.)样品中的Cu、Zn、Pb、Cd、As、Cr、Hg、Ni共8种重金属进行了分析。结果表明:牡蛎体内重金属含量之间存在明显差异,Cu和Zn的含量显著高于其它重金属的含量,且两者之间存在有显著的正相关关系。与海洋贝类的生物质量标准相比,牡蛎体内的重金属含量基本上都还没有超过各自的第二和第三类评价标准,这说明当前东海沿岸海域牡蛎的生物质量总体上尚较好。各类重金属在东海沿岸海域的空间分布基本上以长江口含量为最高,其余海域含量较低,各海域重金属污染程度可分为三类,第一类环境质量较好,第二类环境质量一般,第三类海域环境污染程度较严重,人类活动是污染的主要来源。     

基于卫星的水下载体实时水声定位模型

为适应水下载体高精度实时导航定位的需求,提出了基于卫星导航定位的浮标水声定位系统定位模式,主要讨论了长基线固定浮标定位系统和超短基线单体智能浮标系统的工作原理和点位计算模型,分析了水声定位系统定位的准确度和误差源,对促进全球海域实现全天候高精度完全水下自主定位具有一定的指导意义。     

水温和盐度对长牡蛎“海大1号”早期生长发育的影响

为确定长牡蛎新品种"海大1号"苗种繁育的最适环境条件,研究了盐度对其胚胎发育的影响以及盐度、水温对其幼虫生长、存活率和附着率的影响。结果表明:长牡蛎"海大1号"受精卵孵化的最适盐度为30~35,孵化率最高可达90%。幼虫生长的适宜盐度为20~35,最适盐度为20~30;存活的适宜盐度为20~35,最适盐度为20~25;幼虫附着的适宜盐度为20~35,最适盐度为25~30;对长牡蛎"海大1号"幼虫生长、存活、附着的适宜水温分别为为20~30℃、20~25℃、20~30℃,最适水温分别为30、25、30℃,高温35℃时幼虫全部死亡。综上,长牡蛎"海大1号"苗种培育的适宜盐度为20~35,适宜水温为20~25℃。上述结果为长牡蛎"海大1号"规模化苗种繁育提供了重要的基础资料。     

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.     

海湾扇贝对海水池塘浮游生物和水质的影响

滤食性贝类可从天然水体和养殖水体中滤取大量的浮游物,并将滤食的物质以组织生长、粪便、排泄物等形式重新分配,进而对水质状况产生直接或间接的影响。已有的报道表明,滤食性贝类较多的湖区、海区浮游植物的数量、叶绿素a含量明显减少[1,2],浮游物颗粒规格的结构也会发生变化[3],水柱中小型浮游动物、细菌及水体的水流速度等也会受到一定的影响[4,5]。     

2种罗非鱼加工下脚料产物替代秘鲁鱼粉养殖奥尼罗非鱼(Oreochromis niloticus×O.aureus)稚鱼效果评价

采用传统养殖试验方法进行了评价罗非鱼加工下脚料制备的2种产物替代秘鲁鱼粉在奥尼罗非鱼(Oreochromis niloticus×O.aureus)稚鱼实用日粮中的效果研究。实验设计了3种等蛋白质(33.8%)、等能量(16.50MJ/kg)左右的实用实验日粮,对照组与试验组1、2日粮中分别添加秘鲁鱼粉、罗非鱼加工下脚料产物制备的酶解小肽和鱼粉。实验结果表明,实验期间(63d)各实验组鱼均无死亡;添加罗非鱼鱼粉组鱼的特定生长率和饲料效益均显著性低于秘鲁鱼粉组(P0.05),而添加罗非鱼酶解小肽组鱼的特定生长率和饲料效益均高于秘鲁鱼粉组,但2组间无显著性差异(P0.05);实验各组鱼的肝体比和肠脂比,鱼体水分、粗蛋白质、粗脂肪、粗灰分、氨基酸比例与脂肪酸比例均无显著性差异(P0.05)。本实验认为,在奥尼罗非鱼幼鱼罗非鱼实用日粮中罗非鱼酶解小肽可以替代秘鲁鱼粉,但罗非鱼鱼粉养殖效果较秘鲁鱼粉差。     

象拔蚌人工育苗技术研究

通过对亲贝促熟、人工催产、幼虫培育和采苗等技术环节的研究,建立了象拔蚌(Panopea gen-erosa)的人工繁育技术。研究表明,在盐度28~30条件下,受精卵在水温11、13、16oC时发育至D形幼虫所需时间分别为83、60和46 h;在水温16~18oC,经20 d发育至壳长约380μm的壳顶幼虫时出现足和水管原基,进入附着变态阶段。投放附着基后培育约70 d,可生长至壳长5 mm的幼贝。壳长日增长量在D形幼虫阶段为6.2μm,在壳顶幼虫阶段为16.8μm,附着变态后生长速度加快,外形具成体形态。不同附着基的采苗率依次为：细砂>卵石>聚乙烯网片>波纹板。