A new ornithomimid dinosaur with North American affinities from the Late Cretaceous Qiupa Formation in Henan Province of China

A partial skeleton of the ornithomimid dinosaur, discovered from the Late Cretaceous Qiupa Formation of Luanchuan County, Tantou Basin, Henan Province, China, is described here and assigned to a new genus and species, Qiupalong henanensis, with unique features (a notch on the lateral surface of the lateral posterior process of the proximal end of tibia and a small pit at the contact between astragalus and calcaneum). A phylogenetic analysis in this study suggests that it is a derived ornithomimid and form a monophyly with North American ornithomimids (Struthiomimus altus and Ornithomimus edmontonicus), sharing two characters (straight pubic shaft and large acute angle between pubic shaft and boot). Some characters (small anterior process of the pubic boot and curved pedal unguals) are seen in basal ornithomimosaurs as well, but these features in Q. henanensis are reversal. Qiupalong is the first definitive ornithomimid from outside of the Gobi Desert and is the southern-most occurrence of Late Cretaceous ornithomimid from eastern Asia, demonstrating southern extension of ornithomimid distribution in Asia.     

Dust ring formation due to sublimation of dust grains drifting radially inward by the Poynting-Robertson drag: An analytical model

Dust particles exposed to the stellar radiation and wind drift radially inward by the Poynting-Robertson (P-R) drag and pile up at the zone where they begin to sublime substantially. The reason they pile up or form a ring is that their inward drifts due to the P-R drag are suppressed by stellar radiation pressure when the ratio of radiation pressure to stellar gravity on them increases during their sublimation phases. We present analytic solutions to the orbital and mass evolution of such subliming dust particles, and find their drift velocities at the pileup zone are almost independent of their initial semimajor axes and masses. We derive analytically an enhancement factor of the number density of the particles at the outer edge of the sublimation zone from the solutions. We show that the formula of the enhancement factor reproduces well numerical simulations in the previous studies. The enhancement factor for spherical dust particles of silicate and carbon extends from 3 to more than 20 at stellar luminosities L_?=0.8-500L_⊙, where L_⊙ is solar luminosity. Although the enhancement factor for fluffy dust particles is smaller than that for spherical particles, sublimating particles inevitably form a dust ring as long as their masses decrease faster than their surface areas during sublimation. The formulation is applicable to dust ring formation for arbitrary shape and material of dust in dust-debris disks as well as in the Solar System.     

Evidence for energy injection and a fine-tuned central engine at optical wavelengths in GRB 070419A

We present a comprehensive multiwavelength temporal and spectral analysis of the 'fast rise exponential decay' GRB 070419A. The early-time emission in the γ-ray and X-ray bands can be explained by a central engine active for at least 250 s, while at late times the X-ray light curve displays a simple power-law decay. In contrast, the observed behaviour in the optical band is complex (from 10² up to 10⁶ s). We investigate the light-curve behaviour in the context of the standard forward/reverse shock model; associating the peak in the optical light curve at ∼450 s with the fireball deceleration time results in a Lorenz factor  Γ≈ 350  at this time. In contrast, the shallow optical decay between 450 and 1500 s remains problematic, requiring a reverse shock component whose typical frequency is above the optical band at the optical peak time for it to be explained within the standard model. This predicts an increasing flux density for the forward shock component until   t ∼ 4 × 10⁶ s  , inconsistent with the observed decay of the optical emission from   t ∼ 10⁴ s  . A highly magnetized fireball is also ruled out due to unrealistic microphysic parameters and predicted light-curve behaviour that is not observed. We conclude that a long-lived central engine with a finely tuned energy injection rate and a sudden cessation of the injection is required to create the observed light curves, consistent with the same conditions that are invoked to explain the plateau phase of canonical X-ray light curves of γ-ray bursts.     

Changes of seawater quality in Ofunto Bay,Iwate, after the 2011 off the Pacific coast of Tohoku Earthquake

Ofunato Bay was a semi-closed area because of the breakwater effect at the entrance; however, the breakwater was destroyed by a massive tsunami generated by the 2011 off the Pacific coast of Tohoku Earthquake. Consequently, the physical environment of Ofunato Bay has been changed significantly, i.e., the modification of the stratified structure of seawater inside the bay and the intermittent intrusion of seawater outside the bay. These alterations of physical environment are considered to have an influence on the chemical and biological environment in Ofunato Bay. To elucidate the influence of the tsunami on the aquatic environment, we measured dissolved nutrients, chlorophyll a and dissolved oxygen concentrations, and heterotrophic bacteria abundance inside and outside of Ofunato Bay from 2012 to 2014, and compared these data with those obtained before the earthquake. As compared with before the earthquake, significant changes after the earthquake were (1) decrease of ammonium and phosphate concentrations, (2) increase of chlorophyll a concentration, (3) increase of dissolved oxygen concentration in the bottom, and (4) decrease of heterotrophic bacteria abundance. The collapse of the breakwater and consequential enhanced water exchange were considered to have brought the decrease of nutrient concentration inside the bay. Furthermore, washout of shellfish mariculture rafts by the tsunami decreased the shellfish biodeposits along with the elution of nutrients by heterotrophic bacteria. Decrease of cultivated shellfish further caused a decline in feeding pressure on phytoplankton and, subsequently, increased the phytoplankton biomass that contributed to the decrease of nutrients inside the bay.     

Dietary analysis of harbour seals (Phoca vitulina) from faecal samples and overlap with fisheries in Erimo,Japan

The number of harbour seals in Japan has been rebounding since protection began in the mid‐1980s. With the increase in seal numbers, increased conflict with fisheries has occurred through depredation and the belief that seals compete with fisheries for prey. However, competition can only be determined if the prey species and quantities seals consume over time are known. We studied the diet of harbour seals in Erimo, site of the largest population of harbour seals in Japan, from 2011 to 2012 and assessed the degree of prey overlap with local fisheries. We used both hard parts and DNA techniques to identify prey items in seal scats, and compared these results to local fisheries data. A total of 46 prey occurrences was detected by both methods, of which 17 matched between techniques at least to the family level. Hard parts methods identified five incidences of prey undetected by DNA methods in five scats (one incidence per scat). DNA methods identified 24 additional prey occurrences in 13 scats, for which no hard part evidence for that prey had been found. This more than doubled the total number of prey occurrences across the 15 scats compared. Overall, the most frequently occurring harbour seal prey were walleye pollock (Theragra chalcogramma), sculpins and snailfishes. In contrast, the top three groups targeted by fisheries were codfishes, salmon and invertebrates. Many species common in the harbour seal's diet such as snailfishes and blennies were not targeted by fisheries. Fishes such as greenlings, sculpins, rockfishes and Japanese anchovy (Engraulis japonicus) were common in the diet of harbour seals, but made up a very small proportion of fisheries catches in Erimo. The importance of other prey species varied between seasons. Sculpins, greenlings and forage fishes were the top three prey groups for harbour seals in spring by percent modified frequency of occurrence, whereas the most important target groups by percentage mass caught by fisheries were codfishes, cephalopods and other invertebrates. Sculpins and rockfishes remained as important prey items for harbour seals in summer and autumn, in addition to codfishes, snailfishes and blennies. In contrast, the main groups caught by fisheries in summer were other fishes, particularly Japanese amberjack (Seriola quinqueradiata) and various species of sharks and eels, and invertebrates. By autumn, Erimo fisheries had focussed on catching salmon. Salmon were taken by harbour seals as well during this period, but at a relatively lower frequency compared to other prey groups. The results of our study show that although harbour seals consumed several of the prey species targeted by fisheries, the relative importance of these species to seals and fisheries and the seasons in which they were targeted were different.     

Petrogenesis of mafic and associated silicic end-member magmas for calc-alkaline mixed rocks in the Shirataka volcano,NE Japan

Eruptive products of the Shirataka volcano (0.9–0.7 Ma) in NE Japan are calc-alkaline andesite–dacite, and are divisible into six petrologic groups (G1–G6). Shirataka rocks possess mafic inclusions—basalt–basaltic andesite, except for G3 and G4. All rocks show mixing and mingling of the mafic and silicic end-members, with trends defined by hosts and inclusions divided into high-Cr and low-Cr types; both types coexist in G1, G2, and G5. Estimated mafic end-members are high-Cr (1120–1170°C, 48–51% SiO₂, olv ± cpx ± plg) and low-Cr type magmas (49–52% SiO₂, cpx ± plg) except for the Sr isotopic composition. In contrast, the silicic end-members of both types have similar petrologic features (790–840°C, 64–70% SiO₂, hbl ± qtz ± px + plg). High-Cr type mafic and corresponding silicic end-members have lower ⁸⁷Sr/⁸⁶Sr ratios than the low-Cr ones in each group. The trace element model calculations suggest that the low-Cr type mafic end-member magma is produced through ca. 20% fractional crystallization (olv ± cpx ± plg) from the high-Cr type one with assimilation of granitoids (r = 0.02–0.05). The silicic magmas are producible through <30% partial remelting of previously emplaced basaltic magma with assimilation of crustal components. The compositional difference between the low-K and medium-K basalts in the Shirataka volcano is mainly attributed to the different degrees of the effect of subduction derived fluid by dehydration of phlogopite. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A multiple-code simulation study of the long-term EDZ evolution of geological nuclear waste repositories

This simulation study shows how widely different model approaches can be adapted to model the evolution of the excavation disturbed zone (EDZ) around a heated nuclear waste emplacement drift in fractured rock. The study includes modeling of coupled thermal-hydrological-mechanical (THM) processes, with simplified consideration of chemical coupling in terms of time-dependent strength degradation or subcritical crack growth. The different model approaches applied in this study include boundary element, finite element, finite difference, particle mechanics, and elasto-plastic cellular automata methods. The simulation results indicate that thermally induced differential stresses near the top of the emplacement drift may cause progressive failure and permeability changes during the first 100 years (i.e., after emplacement and drift closure). Moreover, the results indicate that time-dependent mechanical changes may play only a small role during the first 100 years of increasing temperature and thermal stress, whereas such time-dependency is insignificant after peak temperature, because of decreasing thermal stress.