Synchronization of human walking observed during lateral vibration of a congested pedestrian bridge

Observation of human-induced large-amplitude lateral vibration of an actual pedestrian bridge in an extremely congested condition is reported. Walking motions of pedestrians recorded by a video camera are analysed. It is found that walking among 20 per cent or more of the pedestrians on the bridge was synchronized to the girder lateral vibration. With this synchronization, the total lateral force from the pedestrians to the girder is evidently increased and it acts as a resonant force on the girder lateral vibration.     

Amber‐bearing Bed in a Shallow Marine Setting,an Example from the Lower Cretaceous Miyako Group,Northeastern Japan

A previously unknown amber‐bearing bed in the Lower Cretaceous Miyako Group, northeastern Japan, was deposited within a sequence that contains abundant marine macrofossils and wave‐generated sedimentary structures that suggest deposition in an open shallow marine environment. How the amber was transported from its terrestrial origin to the marine environment is unclear, but sedimentary gravity flow is a strong candidate. Our observations suggest that the occurrence of amber clasts in sediments deposited in open and closed shallow marine environments is not uncommon. Thus, in addition to terrestrial sediments, sediments of marine origin have potential as targets for amber exploration.     

Detailed measurements of thickness and grain size of a widespread onshore tsunami deposit in Phang‐nga Province,southwestern Thailand

Measurements of thickness and grain size along flow‐parallel transects across onshore deposits of the 2004 Indian Ocean tsunami revealed macroscopic horizontal variations and provided new insights into tsunami sedimentation. The tsunami caused severe erosion of beaches, river mouths, and the shallow seafloor along the coast of southwestern Thailand and supplied sufficient sediment to deposit a kilometer‐wide blanket of sand on the land surface. The tsunami deposits generally fine landward with some fluctuations caused by local entrainment and settlement of sediments. Sediments of medium and fine sand are restricted to a few hundreds of meters inland from their source, whereas finer grained sediments were suspended longer and deposited 1 km or more inland. Although the thickness of the tsunami deposits is strongly influenced by local topography, they generally thin landward. In areas of low‐relief topography, the rate of landward thinning is exponential and reflects the dominance of sediment supply to nearshore areas over that to areas farther inland.     

Pressure and temperature dependence of cation distribution in Mg-Mn olivine

Synthetic (Mg_0.51, Mn_0.49)₂SiO₄ olivine samples are heat-treated at three different pressures; 0, 8 and 12 GPa, all at the same temperature (～500° C). X-ray structure analyses on these single crystals are made in order to see the pressure effect on cation distribution. The intersite distribution coefficient of Mg and Mn in M1 and M2 sites, K _D = (Mn/Mg) _M1/(Mn/Mg) _M2, of these samples are 0.192 (0 GPa), 0.246 (8 GPa) and 0.281 (12 GPa), indicating cationic disordering with pressure. The small differences of cell dimensions between these samples are determined by powder X-ray diffraction. Cell dimensions b and c decrease, whereas a increases with pressure of equilibration. Cell volume decreases with pressure as a result of a large contraction of the b cell dimension. The effect of pressure on the free energy of the cation exchange reaction is evaluated by the observed relation between the cell volume and the site occupancy numbers. The magnitude of the pressure effect on cation distribution is only a fifth of that predicted from the observed change in volume combined with thermodynamic theory. This phenomenon is attributed to nonideality in this solid solution, and nonideal parameters are required to describe cation distribution determined in the present and previous experiments. We use a five-parameter equation to specify the cationic equilibrium on the basic of thermodynamic theory. It includes one energy parameter of ideal mixing, two parameters for nonideal effects, one volume parameter, and one thermal parameter originated from the lattice vibrational energy. The present data combined with some of the existing data are used to determine the five parameters, and the cation distribution in Mg-Mn olivine is described as a function of temperature, pressure, and composition. The basic framework of describing the cationic behavior in olivine-type mineral is worked out, although the result is preliminary: each of the determined parameters is not accurate enough to enable us to make a reliable prediction.     

Decarbonation reaction of magnesite in subducting slabs at the lower mantle

High-pressure and temperature experiments (28–62 GPa, and 1,490–2,000 K, corresponding to approximately 770–1,500 km depth in the mantle) have been conducted on a MgCO₃ + SiO₂ mixture using a laser-heated diamond anvil cell combined with analytical transmission electron microscope observation of the product phases to constrain the fate of carbonates carried on the subducting basalt into the lower mantle. At these conditions, the decarbonation reaction MgCO₃ (magnesite) + SiO₂ (stishovite) → MgSiO₃ (perovskite) + CO₂ (solid) has been recognized. This indicates that above reaction takes place as a candidate for decarbonation of the carbonated subducting mid ocean ridge basalts in the Earth’s lower mantle.     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

Outflow Propagation in Collapsars: Collimated Jets and Expanding Outflows

We investigate the outflow propagation in the collapsar in the context of gamma-ray bursts (GRBs) with 2D relativistic hydrodynamic simulations. We vary the specific internal energy and bulk Lorentz factor of the injected outflow from non-relativistic regime to relativistic one, fixing the power of the outflow to be 10⁵¹erg s⁻¹. We observed the collimated outflow, when the Lorentz factor of the injected outflow is roughly greater than 2. To the contrary, when the velocity of the injected outflow is slower, the expanding outflow is observed. The transition from collimated jet to expanding outflow continuously occurs by decreasing the injected velocity. Different features of the dynamics of the outflows would cause the difference between the GRBs and similar phenomena, such as, X-ray flashes.     

Heat capacity anomalies at incommensurate-normal transition of åkermanite solid solution (Ca,Sr)2(Mg,Co, Zn,Fe)Si2O7

The heat capacity of åkermanite solid solutions was measured by a small scale adiabatic calorimeter near the incommensurate-normal (I-N) transition. The heat capacity anomalies caused by the I-N transition show the type characteristic behavior implying the presence of dynamical fluctuations. The heat capacity anomalies were observed over the whole range of the åkermanite solid solutions Ca₂Mg_1-xCo_xSi₂O₇ and Ca₂Mg_1-x-Zn_xSi₂O₂. With increase of Co or Zn atoms, the transition temperature, T_i, rises linearly from ca. 83° C to 220° C and to 130° C, respectively. In the system Ca₂CoSi₂O₇-Ca₂FeSi₂O₇ and Ca₂MgSi₂O₇-Ca₂-FeSi₂O₇ electronic microscopy revealed that the temperature of the heat capacity anomaly decreases with increasing Fe content, whereas the T_i rises. This unusual behavior is ascribed to the microdomains observed in high resolution lattice images.