Rapid assessment of cyclone damage using NPP-VIIRS DNB and ancillary data

Natural Hazards - Rapid damage assessment of natural disasters is essential for the fast recovery and strategic post-disaster reconstructions. In the present study, National Polar-Orbiting...     

A Three Dimensional Comparative Study of Seismic Behaviour of Vertical and Batter Pile Groups

To a practicing foundation engineer, the performance of batter pile under seismic conditions still remains a questionable prospect. The contradictory findings reported by various investigators with regard to the performance of batter piles add to this dilemma. This calls for a rigorous three-dimensional investigation to evaluate seismic behavior of batter pile groups. In this study, a comparative assessment of three-dimensional seismic behavior of a 2 × 2 vertical and batter pile groups having batter angle of 15° was carried out using a full three-dimensional finite element code developed in MATLAB (Sarkar 2009). The effects of centre to centre spacing of piles and soil modulus values were investigated. Idealized soil profiles having constant and triangular variation of soil modulus were adopted for the study. Results of analyses for both the vertical and batter pile groups are presented in terms of dynamic stiffness and kinematic interaction factors. Results indicate better seismic performance of batter pile groups in comparison to that of vertical pile groups. To demonstrate the importance of the findings, a five-storied portal frame structure supported separately on vertical and batter pile groups were considered and analyzed for El-Centro Earthquake (1940) time history. The difference in structural response considering vertical and batter pile groups is highlighted.     

Deterministic and Probabilistic Stability Analysis of Soil Slope – A Case Study

This paper deals with the soil slope stability analysis along the road section (National Highway-05) near Luhri area, Himachal Pradesh, India. The area constantly experiences local as well as regional slides which enhances the siltation, reduce carrying capacity of the Sutlej river with time and further increases the water level on the banks of the slope. High traffic congestion puts the area at high risk zone and therefore, stability analysis was done using probabilistic as well as deterministic approach under static conditions through limit equilibrium method (LEM) and finite element method (FEM). FEM was used for stability analysis, mainly to obtain deformational characteristics, under static conditions and compared with LEM results. The results of both the methods help in identifying the zones of vulnerability in the case study. Further, the values of safety factor obtained from both the methods are in close approximation. The study also reveals that the slope is critically stable and a remedial measure has been suggested by modifying the geometry of the slope, which needs proper protection from any external factors like rainfall and earthquakes that may cause unforeseeable circumstances.     

Variability of Indian monsoonal rainfall over the past 100 ka and its implication for C3–C4 vegetational change

Oxygen and carbon isotope ratios of soil carbonate and carbon isotope ratios of soil organic matter (SOM) separated from three cores, Kalpi, IITK and Firozpur, of the Ganga Plain, India are used to reconstruct past rainfall variations and their effect on ambient vegetation. The δ¹⁸O values of soil carbonate (δ¹⁸O_SC) analyzed from the cores range from ? 8.2 to ? 4.1‰. Using these variations in δ¹⁸O_SC values we are able, for the first time, to show periodic change in rainfall amount between 100 and 18 ka with three peaks of higher monsoon at about 100, 40 and 25 ka. The estimation of rainfall variations using δ¹⁸O value of rainwater-amount effect suggests maximum decrease in rainfall intensity (~ 20%) during the last glacial maximum. The δ¹³C values of soil carbonate (δ¹³C_SC) and SOM (δ¹³C_SOM) range from ? 6.3 to + 1.6‰ and ? 28.9 to ? 19.4‰, respectively, implying varying proportions of C₃ and C₄ vegetations over the Ganga Plain during the last 100 ka. The comparison between monsoonal rainfall and atmospheric CO₂ with vegetation for the time period 84 to 18 ka indicate that relative abundances of C₃ and C₄ vegetations were mainly driven by variations in monsoonal rainfall.     

Studies on the variations of heavy metals in the marine sediments off Kalpakkam,East Coast of India

During the last two decades, the coastal environment of southeast India has experienced intense developments in industry, urbanization and aquaculture. Moreover, the 2004 mega tsunami has devastated this coast, thus affecting the coastal sediment characteristics. These two phenomena prompted a study to characterize the sediment, to understand the mechanisms influencing the distribution of heavy metals and to create baseline data for future impact assessment. Results showed that the coastal sediment was carpeted with a mosaic of sand and silty sand with a minor amount of clay. Heavy metal values showed maximum variation for Fe and minimum for Cd. Their average values showed the following decreasing trend: Fe > Cu > Zn > Pb > Cr > Ni > Cd. This study shows that the major source of metals at Kalpakkam coast are land-based anthropogenic ones, such as, discharge from industrial waste, agricultural waste, urban, municipal and slum sewage into the Buckingham canal, which in turn discharges into the sea through backwaters, particularly during northeast monsoon period. A clear signature of the role of backwater discharge increasing the concentration of a few metals in the coastal sediments during monsoon period was observed. Assessments of the degree of pollution, concentration factor (CF), geoaccumulation index (I _geo) and pollution load index (PLI) have been calculated. CF values and I _geo indicated that the coastal sediment is moderately polluted by Cu and Cd. Increase in Cu, Pb and Zn concentration during the monsoon period (October–January) compared to the rest of the year was noticed. Factor analysis and correlation among the heavy metals concluded that Cr, Ni, Cd and Fe are of crustal origin, whereas, Cu, Pb and Zn are from anthropogenic sources. Organic carbon content in the sediment increased during monsoon period, pointing to the role of land runoff and backwater discharge in enhancing its content. The study also elucidates the impact of the recent tsunami in depleting metal content in the coastal sediment as compared to the pre-tsunami period.     

Vegetation covers as indicator of seismo-tectonic environment: an integrated geophysical study in north Baromura hill, India

Spatial distributions of vegetation cover are closely related to topographical characters like slope, steepness, soil types, elevations, etc. In seismo-tectonic regions fault lines or tectonic lineaments are the most prominent surface signatures that can be reflected by vegetation distribution as tectonic displacement causes the change of topographical parameters. In the present study a part of northern Baromura hill (between 23º 42′ N to 23º49 N latitudes and 91º30 E to 91º36 E longitudes), which is considered as an active seismo-tectonic region of Tripura as well as northeast India, was selected for assessing the relationship between spatial variation of plant cover and topography. Geologically, Baromura hill is a north–south extended fold belt and formed by late Tertiary to Quaternary depositions. Evidences show that tectonic events played very important role in landform evolution of this area during the geological past. In this research an extensive fieldwork was conducted in the study area to understand the geomorphic and vegetation signatures and their environmental relationships. Various spectral resolutions of Landsat ETM+ were used for digital analysis. To analyse the vegetation character of this area digital operation was done within the spectral range 0.63–1.75 μm. Band 4 and band 3 were used for NDVI operation. Band 5 or mid-wave infrared band was classified in unsupervised mode to understand the range of plant water in the study area. Overlay operation with those operated images shows the spatial distribution pattern of vegetation cover indicates the landform condition. Three clear tectonic lineaments (faults) were detected from the digital study in on the northern part Baromura hill. Structural conditions of those fault lines were verified by geo-electrical survey during fieldwork. GPS tool was used for fixing the ground control points. Resistivity characters of the study area assessed from VES profile strongly supports that vegetation cover analysis from remotely sensed data within 0.63–1.75 μm spectral ranges can be a very useful tool for detecting surface tectonic signatures of the landform.     

Kinetics of oxytetracycline sorption on magnetite nanoparticles

Iron oxide nanoparticles (nano-Fe) have been widely used in environmental remediation, including that of emerging contaminants, such as antibiotics. Magnetite nanoparticles (nano-Fe₃O₄) have been reported to form on the outer surface of nano-Fe and have the potential to be a good sorbent for certain antibiotics. This study reports, for the first time, the kinetics and thermodynamics of adsorption of a common tetracycline group antibiotic, oxytetracycline (OTC), on nano-Fe₃O₄. Batch sorption kinetics were evaluated by varying initial OTC concentration (0.25–2 mM), nano-Fe₃O₄ concentration (2.5–20 g L^?1), pH (3.8–7.6), temperature (5, 15, 35 °C), and ionic strength (0.01–0.5 M KCl) to derive thermodynamic and kinetic constants. Results show that OTC sorption kinetics is rapid and increases with increasing temperature. The derived thermodynamic constants suggest a surface chemical-controlled reaction that proceeds via an associative mechanism. Results indicate the potential of developing a nano-magnetite-based remediation system for tetracycline group of antibiotics.     

Alterations in Geochemical Associations in Artificially Disturbed Deep-Sea Sediments

In view of the role of Sediment geochemistry in regulating the benthic ecosystem, diagenetic remobilization of dissolved constituents, bottom water redox, and regeneration of benthic fluxes, surficial sediments in and around the track disturbed by a “benthic disturber” were studied for metal variation in three phases: (1) before the disturbance, (2) immediately after the disturbance, and (3) during monitoring of restoration after ~44 months, from the same locations. Minor variations in metal concentrations before the disturbance ere noticed indicating the homogeneity in the area or supply from similar source areas. Terrigenous fraction determined normatively from titanium contents in these sediments ranges between 40 and 47%. Most of the elements analyzed showed reduced average concentrations immediately after the disturbance suggesting physical removal and resedimentation in other areas with the migration of the plume. All the elements showed positive relation and coherence in the sediments collected after the disturbance, irrespective of their susceptibility to changes in provenance and depositional environment, whereas elemental associations during the predisturbance and monitoring periods can be explained by the known geochemical processes. The changes in Al, Ti, excess aluminium contents, their interelement relations, and factor analyses, suggest the possible transformation of clay mineral type due to the benthic disturbance that would involve changes in surface chemistry of clays. Interelement relations among redox-sensitive elements have also changed with time. This includes decoupling of Co from Mn after 44 months, probably due to the varying oxidation kinetics of two major oxides, Fe and Mn. Model calculations suggest increased diagenetic remobilization rates of Mn during the monitoring phase. Substantial increase in redox-sensitive elements, especially Fe and Mn indicate oxygenation of bottom water due either to reduced activity of benthic burrowing organisms or to renewal of oxygen-rich Antarctic Bottom water (AABW). Increase in these elements is consistent with the results of the HEBBLE experiment, where the burrows seem to protect these elements from strong bottom currents. Restoration of predisturbance values in the terrigenous component is attributed to the influence of shifts in the direction of bottom flow and suggests that bottom currents would play a major role in restoring the lithogenic component by transporting it from other locations within the Basin during commercial mining operations.     

Onboard performance of the RT-2 detectors

The RT-2 Experiment onboard the CORONAS-PHOTON satellite is designed to study the spectral, temporal, and spatial details of solar hard X-ray flares in the 15–150 keV range. Above this energy (and upto 1000 keV), it also acts as an omni-directional gamma-ray detector with a capability to study gamma-ray bursts (GRB), bright solar flares, and X-ray pulsars. With an ensemble of hard X-ray detectors with different fields of view and coding devices, it also has the capability to investigate the spectrum of Cosmic Diffuse X-ray Background. The performance of the detectors from 2009 February to November is described in this paper. Results obtained on a few GRBs and solar flares are also briefly discussed.