CSU－RAMS模式在区域气侯模拟中的应用

将ＣＳＵ－ＲＡＭＳ（中尺度）数值模式改造成“区域气候数值模式”以及进行区域气候数值模拟的试验研究。说明将有限区域中尺度数值模式与ＧＣＭ模式嵌套应用到区域气候数值模拟研究上能够取得有意义的结果。它能在一定程度上改善ＧＣＭ模式的不足。可以更为细致地描述大气环流的变化特征,是了解区域气候变化的有效方法之一。     

Densities of Huanghe River estuary and Bohai Bay waters

The densities of 36 water samples from the Huanghe River estuary and Bohai Bay were determinedby a magnetic float densimcter under three temperatures from 15℃ to 25℃.All the measured densities ofsamples were greater than that of the values calculated from the International Equation of State of Seawater.The differences between the measured and calculated densities increased with the decrease of salinities.The dif-ferences appeared exponentially correlated with[Ca~(2+)]/s,[Mg~(2+)]/s and[SO_4~(2-)]/s,and had"s"type curverelationship with the alkalinity in all salinity range.But in the salinity ranging from 25.72 to 31.57,therelationships were all linear.The density difference can be estimated from the equation △ρ（10~3kg·m~(-3)）=（-2.79+236.5([Ca~(2+)]/s)/(-9.7464×10~（-3）+[Ca~(2+)]/s).It was the high alkalinity and[Ca~(2+)]/s that resulted in the measured densi-ties of seawaters being higher than the calculated densities in the Huanghe estuary and Bohai Bay.     

推广的半动态法及其在多级工程控制网精度评定中的应用

为了合理地求定按附合网平差的网点坐标的实际精度,本文推广了半动态法,籍此可在首级网的基准下,统一求定顾及各级控制网测量误差影响精度的全部网点坐标的方差—协方差阵。本文所提出的方法适用于种种情况下的精度估计:等级数不受限制的平面、高程或三维网,本级网平差中的固定数据以及待估计的平差值函数可以包含不同级的网点,从而克服了半动态法原有的局限性。     

Research on temporal and spatial distribution, evolutionary character and mechanism of crustal deformation field before and after the Tangshan earthquake

Ｒｅｓｅａｒｃｈｏｎｔｅｍｐｏｒａｌａｎｄｓｐａｔｉａｌｄｉｓｔｒｉｂｕ┐ｔｉｏｎ,ｅｖｏｌｕｔｉｏｎａｒｙｃｈａｒａｃｔｅｒａｎｄｍｅｃｈａｎｉｓｍｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｂｅｆｏｒｅａｎｄａｆｔｅｒｔｈｅＴａｎｇｓｈａｎ...     

高原大地形及海洋热力强迫对东亚及北半球环流和气候变化影响的观测研究

本文总结了“青藏高原大地形及西太平洋暖池势力强迫对东亚及全球气候变化的影响”专题五年来的主要研究工作。其中包括青世故高原东部大气热源的时间演变特征,夏半年高原热源异常对我国降水和北半球环流的影响;西沙海温变化特征及其与我南方降水的关系,北太平洋海温主因子特征及其与华南前汛期降水的变化。     

TOWARD ESTABLISHING THE CONCEPT OF PHYSICAL URBAN AREA IN CHINA

I.IntroduchollWiulegeOgraphystudiestheterritoria1systemsabouttherelationsbforeenhumanbeingSandthenature[I4],urbanmpaphyfocusesspecificallyonthespatialoopltizationandprocessofurbanterritory,anditsinteraCtionwiti1Otherterritorialsystems.Usually,wedoresearch…     

成都城市发展对热岛强度影响的主成份回归分析

本文对成都市总人口、建成区面积等11个因子、作了主成份回归L-S估计和M-估计,讨论了成都城市发展对“热岛”强度的主要影响因子。结果表明,城区房屋建筑面积及总人口数是影响城市气候(气温)的主要因子,其次为城市人口总户数、建成面积等。 文中,对回归方程进行了拟合计算,回归效果比较满意(尤其是稳健回归)。     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

QTPV Data Model and Algorithm and Its Application to Geological Exploration Engineering

3D spatial data model and simulating are the core of 3D GIS can be adopted in different domains. A data model based on Quasi Tri-Prism Volume (QTPV) has been proposed. QTPV definition and its special cases have been discussed. Using QTPV and its special cases, irregular natural geological bodies and regular subsurface engineering can be described efficiently. The proposed model is composed of five primitives and six objects. Data structures and topological relationship of the fives primitives and three objects describing stratigraphy are designed in detail Some schemes are designed for the QTPV modelling of stratigraphy and subsurface engineering according to modelling data. The model manipulation method of QTPV cutting by an arbitrary plane is discussed. Using VC 6.0 programming language integrated with SQL database and OpenGL graphic library under windows environment, a system prototype 3DGeoMV has been developed. The experiment result shows that the QTPV model is feasible and efficient in modelling subsurface engineering.     

基于MPI的机群并行计算系统平台构建

在高性能计算机领域,机群并行系统已成为一种重要的系统结构。这里介绍了机群并行系统的特点和发展现状;给出了将PC机或工作站通过高速以太网连接,使用TCP/IP作为标准的通信协议,利用MPI作为分布式的并行计算软件环境,在Windows平台和Unix平台上搭建用户自己的PC机群系统的两种方法;还给出了MPI安装中需要注意的关键步骤。实践表明,PC机群系统具有高性能、高可用性和极高的性价比。