Stability analysis of lateritic waste deposits

In open-pit mines covered with lateritic soil, the sterile ground is stored in specially prepared sites. The waste area must then be enhanced in order to extend storage capacity.

To better understand the effect of an elevated dump, typical laboratory tests (triaxial and oedometer tests) have been performed on the lateritic material. The waste disposal site has been modeled using both limit equilibrium and finite element methods. Different types of finite element models have been run; they take the variation of Young's modulus with depth into account and simulate the effect of construction over various phases. Modeling results are then compared with in situ measurements.     

Dynamic behavior of a smart device on a surface subjected to earthquake motion

This paper leverages concepts from an existing model to simulate the planar response of a smart device subjected to friction forces induced by an underlying moving plane. An interpolation technique is used to enhance detection of transition points (between sticking and sliding states), which must be accurately identified because of the frequency of their occurrence during seismic motion. The behavior of a smart device on an unconstrained table or desk, which is itself on a moving floor, is introduced and discussed. After validation of the results using experimental data, the revised model is used to study the sliding potential of smart devices on a surface during strong seismic events. Sliding spectra associated with selected ground motions are presented and extended to incorporate the effect of vertical accelerations with the purpose of assessing their influence. It is shown that vertical accelerations have a minimal effect on the sliding behavior of smart devices and that a “probability of exceeding the slip limit” curve can be developed to relate the probability of sticking to a demand parameter that represents the ground motion.     

Study of seismicity in the NW Himalaya and adjoining regions using IMS network

The Reviewed Event Bulletin (REB) of the International Data Center (IDC) has been used in order to investigate the seismicity of the Northwest Himalaya and its neighboring region for the time period June 1999 to March 2015 within the geographical coordinates 25–40° N latitude and 65–85° E longitude. We have used a very precisely located earthquake dataset recorded by the International Monitoring System (IMS) Network containing 7,583 events with body wave magnitudes from 2.5 to 6.3. The study area has been subdivided into six regions based on the Flinn-Engdahl (F-E) seismic and geographical regionalization scheme, which was used as the region classifications of the International Data Center catalog. The examined region includes NW India, Pakistan, Nepal, Xizang, Kashmir, and Hindukush. For each region, Magnitudes of completeness (Mc) and Gutenberg-Richter (GR) recurrence parameters (a and b values) have been estimated. The Gutenberg-Richter analysis is preceded by an overview of the seismotectonics of the study area. The obtained Mc values vary from 3.5 to 3.9. The lower value of Mc was found mainly in Xizang region whereas the higher Mc threshold is evident in Pakistan region. However, the b values vary from 1.19 to 1.48. The lowest b value is recorded in Xizang region, which is mostly related to the Main Karakoram Thrust (MKT) fault, whereas the highest b values are recorded in NW India and Kashmir regions, which are mostly related to the Main Frontal Thrust (MFT) fault. The REB for the selected period has been compared to the most renowned bulletin of global seismicity, namely that issued by the National Earthquake Information Center (NEIC) of the United States Geological Survey (USGS). A study of 4,821 events recorded by USGS in the study region indicates that about 36 % of seismic events were missed and the catalog is considered as complete for events with magnitudes ≥4.0. However, both a and b values are obviously higher than those of IMS catalog. The a and b parameters in the Gutenberg-Richter magnitude–frequency relationship have been utilized to forecast the probability of future earthquakes of different magnitudes and returned periods (recurrence intervals).     

Effect of spatial resolution of satellite images on estimating the greenness and evapotranspiration of urban green spaces

Urban green spaces (UGS), like most managed land covers, are getting progressively affected by water scarcity and drought. Preserving, restoring and expanding UGS require sustainable management of green and blue water resources to fulfil evapotranspiration (ET) demand for green plant cover. The heterogeneity of UGS with high variation in their microclimates and irrigation practices builds up the complexity of ET estimation. In oversized UGS, areas too large to be measured with in situ ET methods, remote sensing (RS) approaches of ET measurement have the potential to estimate the actual ET. Often in situ approaches are not feasible or too expensive. We studied the effects of spatial resolution using different satellite images, with high-, medium- and coarse-spatial resolutions, on the greenness and ET of UGS using Vegetation Indices (VIs) and VI-based ET, over a 780-ha urban park in Adelaide, Australia. We validated ET with the ground-based ET method of Soil Water Balance. Three sets of imagery from WorldView2, Landsat and MODIS, and three VIs including the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI) and Enhanced Vegetation Index 2 (EVI2), were used to assess long-term changes of VIs and ET calculated from the different imagery acquired for this study (2011–2018). We found high correspondence between ET-MODIS and ET-Landsat (R² > 0.99 for all VIs). Landsat-VIs captured the seasonal changes of greenness better than MODIS-VIs. We used artificial neural network (ANN) to relate the RS-ET and ground data, and ET-MODIS (EVI2) showed the highest correlation (R² = 0.95 and MSE =0.01 for validation). We found a strong relationship between RS-ET and in situ measurements, even though it was not explicable by simple regressions; black box models helped us to explore their correlation. The methodology used in this research makes a strong case for the value of remote sensing in estimating and managing ET of green spaces in water-limited cities.     

Perturbation method in the theory of nonlinear oscillations

Asymptotic recurrence formulas for treating nonlinear oscillation problems are presented. These formulas are based on a Lie transform similar to that described by Deprit for Hamiltonian systems. It is shown that the basic formulas have essentially the same forms as those obtained by Deprit and by the present author in the Hamiltonian case.     

Neoproterozoic granites of Sharm El-Sheikh area,Egypt: mineralogical and thermobarometric variations

Calc-alkaline and alkaline intrusions of the late Neoproterozic form essential part of the Arabian–Nubian Shield. They were formed during the collision between East- and West-Gondwana. Sharm El-Sheikh area, Sinai, includes wide compositional array of these intrusions that can be considered as a case study. Variations in both tectonic and thermobarometric condition for granitic intrusions are studied. Four mappable granitic types are recognized namely monzogranite, syenogranite, alkali feldspar granites, and riebeckite-bearing granites. The monzogranite and the syenogranite of the study area are mostly I-type, whereas the alkali feldspar granite and the riebeckite-bearing granite belong to A-type granitoid. The calc-alkaline intrusions were formed in compressional setting due to decompressional melting of mafic lower crust. Partial melting and anatexing of crustal rocks are suggested to explain the protolith of the alkaline intrusions. The transition from the calc-alkaline magma to the alkaline one occurred as a result of the tectonic transition from compression regime to tectonic relaxation (extension setting) during the last stage of the Pan-African Orogeny. The amphiboles of the studied granites are classified as calcic- and alkali-amphiboles. The calcic-amphiboles are ferro-edenite while the alkali-amphiboles are typically riebeckite. Both amphibole types are of magmatic nature. Coexisting amphiboles and plagioclases are used to estimate the physicochemical parameters of magma crystallization. The syenogranite underwent temperature and pressure of formation range of 520–730 °C, <3 kbar. The alkali feldspar granite records 450–830 °C, <4 kbar, while the riebeckite-bearing granite records the lowest temperature condition among all varieties and estimate formation at 350–650 °C, <4 kbar.     

An Integrated Study of the Dynamics of Electromagnetic and Acoustic Regimes During Failure of Complex Macrosystems Using Rock Blocks

The development of the failure process in complex macrosystems using large rock samples subjected to biaxial compression has been studied by means of electromagnetic radiation (EMR) and acoustic emission (AE). In order to increase the stage of macrofailure development, a special procedure of rock loading was used to reveal regularities of nucleation and evolution of electromagnetic and acoustic structures. The synchronised measurements of EMR and AE allowed the control of the stress–strain state in the rocks and the structural developments of fracturing. Non-homogeneous distribution of the rock spatial crystalline structure subject to load leads to a mosaic distribution of EMR and AE characteristics. As a result, the crack scale effect may be observed in the EMR and AE structure behaviours. The EMR and AE following the failure at different levels behave differently according to the difference in the scale and type of cracks. Intense high-frequency EMR pulses were recorded during the initial stage of microcrack generation occurring prior to major failure of material. This was not the case for AE. The nucleation and development of the macroscopic progressive failure evolution caused an alternation in energetic and frequencial properties of electromagnetic and acoustic events. It has been detected that the tensile cracks were more efficient than shear cracks in capacity of EMR generation. The analysis of self potentials allowed reaching the maximum of registered anomalous variations in the stage of microcracking interaction. This stage showed an increase in the EMR activity, which implies the nucleation of microcracks in various regions of rock interfaces. The gradual accumulation of these defects led to weakening some parts of the rock along with a disintegration of electric anomalies, increase of AE and a significant fluctuation in the rate of EMR. When crack concentration attains its critical value, which results in the formation of dangerous macroscopic failure of higher level, AE shows an intense activity as well as an EMR lower frequency. The hierarchical development of rock failure using the ratio of the average crack size and the mean distance between cracks as a statistical concentration criterion is used to control the boundary of the transition from small dispersed cracks accumulation to gradual crack merger and the formation of the main macrofailure. These results could be transferred into larger scale levels to forecast dynamic events in the earth crust.     

Gypsum and dolomite biomineralization in endoevaporitic microbial niche,EMISAL, Fayium,Egypt

Biogenic gypsum in the form of microbialite and potential domal stromatolite as well as endoevaporitic dolomite are deposited in a perennial saline basin characterized by microbial bloom. Deposition environment, mode of occurrence, and microscopic investigation including SEM of these precipitates are discussed in conjunction with XRD, XRF, and FTIR data. Combined effects of salinity gradient and the wind action on the maturity of gypsum outcrop are evident. A characteristic multi-color vertical gypsum profile reflects steep gradient of oxi-anoxic microenvironments and encodes diverse seasonal microbial communities. Direct impact of microbial signature in gypsum crystal habit is conspicuous. Endoevaporitic authigenic dolomite is recorded in specific horizons in interstices of selenite layers.     

Recharge mode and mineralization of groundwater in a semi-arid region: Sidi Bouzid plain (central Tunisia)

Groundwater is the most important source of water supply in Sidi Bouzid plain located in central Tunisia. Proper understanding of the geochemical evolution of groundwater is important for sustainable development of water resources in this region. A hydrogeochemical survey was conducted on the Mio–Plio–Quaternary aquifer system using stable isotopes, radiocarbon, tritium and major elements, in order to evaluate the groundwater chemistry patterns and the main mineralization processes occurring in this system. The chemical data indicate that dissolution of evaporate minerals and evaporation are the main processes controlling groundwater mineralization. The isotopic data show that groundwater in the study area is a mixture of recent shallow waters located upstream and along Wadi Al Fakka bed and paleowaters located towards plain limits and discharge areas. Low ³H and ¹⁴C contents are observed in major part of the plain indicating that recharge of the aquifer occurs mainly through direct infiltration at Wadi Al Fakka while there is no evidence of significant recharge in major part of the plain and mountains piedmonts.     

Rotational excitation of protonated hydrogen cyanide (HCNH+) by He atom at low temperature

We report on ab initio coupled-cluster calculations of the interaction potential energy surface for the HCNH⁺–He complex. The aug-cc-pVTZ Gaussian basis, to which is added a set of bond functions placed at mid-distance between HCNH⁺ center of mass and He atom is used. The HCNH⁺ bonds length are set to their values at the equilibrium geometry, i.e., r _e [HC]=1.0780 Å, r _e [CN]=1.1339 Å and r _e [NH]=1.0126 Å. The interaction energy presents a global minimum located $266.9~\mathrm{cm^{-1}}$ below the HCNH⁺–He dissociation limit. Using the interaction potential obtained, we have computed rotational excitation cross sections in the close-coupling approach and downward rate coefficients at low temperature (T≤120 K). It is expected that the data worked out in this study may be beneficial for further astrophysical investigations as well as laboratory experiments.