Estimation of the <Emphasis Type="Italic">in situ</Emphasis> Ultraviolet-A absorption of seawater by a simple irradiance inversion model

An irradiance inversion model to estimate the in situ absorption coefficient of seawater has been developed for the Ultraviolet-A (UVA) wavelength domain. Input parameters are sun angle and the up-and downward planar irradiances measured for at least two depths. The present method does not require seawater to be sampled, and is a discrete wavelength method which returns the absorption coefficient at a given wavelength from the irradiances measured at that wavelength without assuming a spectral shape of any optical properties a priori. Comparison between the model results and spectrophotometric measurements shows that the model is practically useful when cloud cover in the atmosphere is ≤ 50%. According to the present method, measurements of the irradiances enable simultaneous observation of the in situ underwater UVA radiation level and the absorption capacity of bulk seawater using a radiometer.     

Numerical study of baroclinic tides in Luzon Strait

The spatial and temporal variations of baroclinic tides in the Luzon Strait (LS) are investigated using a three-dimensional tide model driven by four principal constituents, O₁, K₁, M₂ and S₂, individually or together with seasonal mean summer or winter stratifications as the initial field. Barotropic tides propagate predominantly westward from the Pacific Ocean, impinge on two prominent north-south running submarine ridges in LS, and generate strong baroclinic tides propagating into both the South China Sea (SCS) and the Pacific Ocean. Strong baroclinic tides, ∼19 GW for diurnal tides and ∼11 GW for semidiurnal tides, are excited on both the east ridge (70%) and the west ridge (30%). The barotropic to baroclinic energy conversion rate reaches 30% for diurnal tides and ∼20% for semidiurnal tides. Diurnal (O₁ and K₁) and semidiurnal (M₂) baroclinic tides have a comparable depth-integrated energy flux 10–20 kW m⁻¹ emanating from the LS into the SCS and the Pacific basin. The spring-neap averaged, meridionally integrated baroclinic tidal energy flux is ∼7 GW into the SCS and ∼6 GW into the Pacific Ocean, representing one of the strongest baroclinic tidal energy flux regimes in the World Ocean. About 18 GW of baroclinic tidal energy, ∼50% of that generated in the LS, is lost locally, which is more than five times that estimated in the vicinity of the Hawaiian ridge. The strong westward-propagating semidiurnal baroclinic tidal energy flux is likely the energy source for the large-amplitude nonlinear internal waves found in the SCS. The baroclinic tidal energy generation, energy fluxes, and energy dissipation rates in the spring tide are about five times those in the neap tide; while there is no significant seasonal variation of energetics, but the propagation speed of baroclinic tide is about 10% faster in summer than in winter. Within the LS, the average turbulence kinetic energy dissipation rate is O(10⁻⁷) W kg^{− 1} and the turbulence diffusivity is O(10⁻³) m²s⁻¹, a factor of 100 greater than those in the typical open ocean. This strong turbulence mixing induced by the baroclinic tidal energy dissipation exists in the main path of the Kuroshio and is important in mixing the Pacific Ocean, Kuroshio, and the SCS waters.     

Review of recent findings on the water masses and circulation in the East Sea (Sea of Japan)

Recent findings on water masses, biogeochemical tracers, deep currents and basin-scale circulation in the East/Japan Sea, and numerical modeling of its circulation are reviewed. Warming continues up to 2007 despite an episode of bottom water formation in the winter of 2000–2001. Water masses have definitely changed since the 1970s and further changes are expected due to the continuation of warming. Accumulation of current data in deep waters of the East/Japan Sea reveals that the circulation in the East/Japan Sea is primarily cyclonic with sub-basin scale cyclonic and anticyclonic cells in the Ulleung Basin (Tsushima Basin). Our understanding of the circulation of intermediate water masses has been deepened through high-resolution numerical studies, and the implementation of data assimilation has had initial success. However, the East/Japan Sea is unique in terms of the fine vertical structures of physical and biogeochemical properties of cold water mass measured at the highest precision and their rapid change with the global warming, so that full understanding of the structures and their change requires in-depth process studies with continuous monitoring programs.     

Optical properties of the red tide in Isahaya Bay,southwestern Japan: Influence of chlorophyll a concentration

Remote sensing reflectance [R _rs(λ)] and absorption coefficients of red tides were measured in Isahaya Bay, southwestern Japan, to investigate differences in the optical properties of red tide and non-red tide waters. We defined colored areas of the sea surface, visualized from shipboard, as “red tides”. Peaks of the R _rs(λ) spectra of non-red tide waters were at 565 nm, while those of red tides shifted to longer wavelengths (589 nm). The spectral shape of R _rs(λ) was close to that of the reciprocal of the total absorption coefficient [1/a(λ)], implying that the R _rs(λ) peak is determined by absorption. Absorption coefficients of phytoplankton [a _ph(λ)], non-pigment particles and colored dissolved organic matter increased with increasing chlorophyll a concentration (Chl a), and those coefficients were correlated with Chl a for both red tide and non-red tide waters. Using these relationships between absorption coefficients and Chl a, variation in the spectrum of 1/a(λ) as a function of Chl a was calculated. The peak of 1/a(λ) shifted to longer wavelengths with increasing Chl a. Furthermore, the relative contribution of a _ph(λ) to the total absorption in red tide water was significantly higher than in non-red tide water in the wavelength range 550–600 nm, including the peak. Our results show that the variation of a _ph(λ) with Chl a dominates the behavior of the R _rs(λ) peak, and utilization of R _rs(λ) peaks at 589 and 565 nm may be useful to discriminate between red tide and non-red tide waters by remote sensing.     

原子掺杂对单元材料结晶能力的影响

2009年我们建立了一个凝结势模型用以预测材料形成单晶体的能力,表明单元体材料(Ni,Al,Cu,Ar,Mg)的结晶能力随凝结势的增大而单调增强.本文将凝结势模型应用于二元材料体系,并结合分子动力学模拟研究了6% Al原子掺杂对于Ni单晶材料结晶能力的影响.模拟结果发现,Al元素的掺杂会大大减弱Ni单晶的结晶能力,在此基础上提出了二元材料体系凝结势的定义,表明凝结势模型可广泛应用于预测二元体材料的结晶能力.     

增强型AlGaN/GaN高电子迁移率晶体管高温退火研究

深入研究了两种增强型AlGaN/GaN高电子迁移率晶体管(HEMT)高温退火前后的直流特性变化.槽栅增强型AlGaN/GaN HEMT在500 ℃ N₂中退火5 min后,阈值电压由0.12 V正向移动到0.57 V,器件Schottky反向栅漏电流减小一个数量级.F注入增强型AlGaN/GaN HEMT在 400 ℃ N₂中退火2 min后,器件阈值电压由0.23 V负向移动到-0.69 V,栅泄漏电流明显增大.槽栅增强型器件退火过程中Schottky有效势垒     

The ground-state entanglement in the spin-XX chain with a magnetization current

The ground-state entanglement in a transverse spin-1/2 XX chain with a magnetization current is studied. By introducing a magnetization current to the system, a quantum phase transition to current-carrying phase may be presented with the variation of the driving field λ for the magnetic field h>1; and the ground-state entanglement arises simultaneously at the critical point of quantum phase transition. In our model, the introduction of magnetization current may result in more entanglement between any two nearest-neighbour spins.     

Stable 85Rb micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

We describe the microfabrication of ⁸⁵Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm³ internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ⁸⁵Rb D1 transition with proper broadening and the corresponding coherent population trapping (CPT) resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock (CSAC) based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1×10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

Formation of saddle dolomites in Upper Cambrian carbonates, western Tarim Basin (northwest China): Implications for fault-related fluid flow

The saddle dolomites occur more intensely in cores closely to fault than that in cores far away from the fault in Upper Cambrian carbonate of western Tarim basin, suggesting that formation of the saddle dolomites is likely related to fault-controlled fluid flow. They partially fill in fractures and vugs of replacement dolomite. The saddle dolomites exhibit complex internal textures, commonly consisting of core and cortex. In comparison with the matrix dolomites, the saddle dolomites show lower Sr-content and ⁸⁷Sr/⁸⁶Sr ratios, higher Fe- and Mn-content, and more negative δ¹⁸O values. Combined with high Th (100–130 °C) of primary fluid inclusions, it is suggested that the saddle dolomites precipitated from hydrothermal fluid derived from the deep evaporite-bearing Middle Cambrian strata, and the magnesium source may be due to dissolution of host dolomite during hydrothermal fluid migration. Fault activity resulted in petrographic and geochemical difference of the core and cortex of the saddle dolomites. The cores precipitated from the formation water mixed by deep brines at the early stage of fault activity, and the cortexes precipitated from the deep fluid with higher temperatures through the Middle Cambrian later. In summary, the formation of the saddle dolomites implies a hydrothermal fluid event related to fault activity, which also resulted in high porosity in Upper Cambrian carbonate in western Tarim Basin.