基于DXF的OpenFlight数据创建方法研究

针对虚拟城市仿真系统应用中OpenFlight模型缺乏、建模方式单一,难以构建复杂模型的情况,本文提出基于CAD文件来构建Opeflght模型的方法,在详细分析OpenFlight和DXF的数据组织结构的基础上,设计了基于DXF的OpenFlight数据创建方案并编程实现。通过实例测试证明该方案能快速、完整地进行数据转换,为虚拟城市系统的三维仿真模型构建提供了一条行之有效的途径。     

Study on Recovering the Earth＇s Potential Field Based on GOCE Gradiometry

Given the second radial derivative Vrr（P） ｜δs of the Earth＇s gravitational potential V（P） on the surface δS corresponding to the satellite altitude, by using the fictitious compress recovery method, a fictitious regular harmonic field rrVrr（P）^＊ and a fictitious second radial gradient field V：（P） in the domain outside an inner sphere Ki can be determined, which coincides with the real field V（P） in the domain outside the Earth. Vrr^＊（P）could be further expressed as a uniformly convergent expansion series in the domain outside the inner sphere, because rrV（P）^＊ could be expressed as a uniformly convergent spherical harmonic expansion series due to its regularity and harmony in that domain. In another aspect, the fictitious field V^＊（P） defined in the domain outside the inner sphere, which coincides with the real field V（P） in the domain outside the Earth, could be also expressed as a spherical harmonic expansion series. Then, the harmonic coefficients contained in the series expressing V^＊（P） can be determined, and consequently the real field V（P） is recovered. Preliminary simulation calculations show that the second radial gradient field Vrr（P） could be recovered based only on the second radial derivative V（P）｜δs given on the satellite boundary. Concerning the final recovery of the potential field V（P） based only on the boundary value Vrr （P）｜δs, the simulation tests are still in process.     

多因子影响的地图居民地自动聚群与综合研究

提出了地图综合目的的居民地聚群需要遵循Gestalt的邻近性、相似性和方向性原则,描述居民地结构、形态及其关系需要6个因子,即居民地间的距离、可视区域面积、大小相似度、形状相似度、方向关系、居民地内部方向;进而运用这些原则和因子,给出了居民地的自动聚群和综合方法.     

评价生物气生成量、生成期的元素平衡法及其应用

生物气的生成期对其成藏有至关重要的制约作用,但目前国内外尚缺少可信、有效方法来对此进行评价。针对这一难题,考虑到无论生物气的生成机理如何,都是一个有机元素之间的物质平衡过程,文章探索并建立了评价生物气生成量的元素平衡法,并利用松辽盆地大量的实际分析数据,对这一评价方法(模型)进行了标定和应用。结果表明,松辽盆地生物气的生成可能主要发生在800m以浅的埋深条件下;区内源岩生物气的生成量约为285.0×1012m3;生物气的主要生成期在嫩江组沉积末期之前。     

中国海相探矿权区块定量评价方法

在研究了我国海相油气探矿权区块基本油气地质条件、勘探程度、技术经济条件等要素和特点的基础上,给出了48个评价参数和归一化取值参照表,建立了探矿权区块评价工作流程、评分参数及计算公式。提出对我国海相勘探层探矿权区块评价应该注意:与国外海相碳酸盐岩评价的差别;与国内陆相碎屑岩评价的差别;成藏组合的划分;评价内容的有效性、不确定性和评价参数的可信度;成败经验的总结和勘探程度的研究。     

砂芯的第四纪环境遗迹研究值得重视——第四纪孢粉环境信息对全球环境研究的倡议

1996年春,天津地质调查中心海岸带与第四纪地质研究所参加了新疆地矿局在塔克拉玛干沙漠的地下水勘查工作,负责沙漠中心区KT1孔(塔中南侧38km处,38°47′N,83°57′E,孔深653.8m)的野外岩芯编录、取样和综合研究。KT1孔基本上是砂层与泥质沉积的互层,大致划分为212层、106个互层、53个中     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

磷处理粉煤灰可作农业土壤磷源

粉煤灰(简称CCP或ash)具有改良土壤,增加植物产量的功能。此外,由于它特殊的多孔结构,也可用作吸纳并承载植物养分的载体。用NaH2PO4配制成含磷0.10mol/L浓度的溶液,对采自加拿大西安大略省Sarnia地区Lambton电厂的底灰(bottomash)进行振荡浸渍处理。结果表明,振荡浸渍66h后的粉煤灰中磷含量可达784×10-6。以磷处理粉煤灰、未进行磷处理的粉煤灰和石英砂按比例混合,作为基本生长介质进行玉米种植实验,其中实验配方设计为生长介质中含磷量分别为标准含磷浓度(50×10-6)的10%、25%、50%、75%和100%。生长26、34和46d后分别与不含磷的空白配方、施加含氮-磷-钾为0-20-0标准磷肥并控制磷含量为标准浓度(50×10-6)配方进行生物产量对比。生长实验结果表明,以磷处理粉煤灰供磷的生长介质,当含磷量为标准浓度的25%至100%时,其植物生长量就比添加标准浓度磷肥的配方好。种植46d后的生物生长量统计结果显示,含磷分别为标准浓度50%、75%和100%的实验介质中,玉米杆的鲜重较施标准磷肥介质中玉米分别增长39.46%、42.73%和46.13%;玉米杆干重依次增加29.71%、13.39%和28.87%;根鲜重平均增加16.62%;根干重平均增加14.03%。上述实验结果启示,粉煤灰可以很好地吸纳承载磷养分,并持续供给植物吸收生长,如果采用吸纳磷(或其他养分)的粉煤灰改良砂质土壤将有重要意义。     

A robust-symmetric mean: A new way of mean calculation for environmental data

Environmental data seldom follow normal distributions, so how to calculate their means is a very important problem. Commonly used methods for mean calculation, such as arithmetic mean, geometric mean, and median, were evaluated. Arithmetic means should only be used when datasets follow normal distributions. Geometric means are suitable for datasets which follow log-normal distributions. Medians are a kind of robust treatment. However, their efficiency is very low. Based on the methods described, two new ideas are developed: robust and symmetric, for calculating means. As far as the symmetric feature is concerned, Box-Cox power transformation is better than logarithmic transformation. Robust statistics and Box-Cox transformation are combined to produce the robust-symmetric mean. As environmental data often follow log-normal or skewed distributions, this method is better than the previous ones and also is appropriate.