On Extending The Flux-Profile Similarity Theory To Include Quasi-Homogeneous Conditions In The Marine Atmospheric Surface Layer

In order to apply Monin–Obukhov similarity theory to estimatethe profiles of mean quantities and surface fluxes from bulk meteorological parameters, the assumptions of homogeneityand stationarity must be valid. Unfortunately, in coastal zones as well as many other regions of interest, theseassumptions are often violated. In this paper, an extension to the theory is presented that considers systematically varyingstate variables. Along-wind variations of windspeed, atmospheric stratification, and roughness are examined with respectto their relative importance to momentum flux divergence, and the drag coefficient is shown to be systematicallylower in coastal zones. For profiles of scalars, an analysis of the set of quasi-homogeneous terms is only speculated,and the relative importance for the terms will strongly depend on which scalar is of interest.     

Determination of Area-Averaged Water Vapour Fluxes with Large Aperture and Radio Wave Scintillometers over a Heterogeneous Surface – Flevoland Field Experiment

A large aperture scintillometer (LAS) andradio wave scintillometer (RWS)were installed over a heterogeneous areato test the applicability of the scintillation method.The heterogeneity in the area, whichconsisted of many plots, was mainly caused bydifferences in thermal properties ofthe crops; the variations in theaerodynamic roughness lengthwere small. The water vapour fluxesderived from the combined LAS-RWSsystem, also known as the two-wavelengthmethod, agreed fairly well with the aggregatedwater vapour fluxes derived from in-situeddy covariance measurements. The water vapourfluxes derived from a stand-alone LASare also presented. It was found that a single LASand an estimate of the area averagedavailable energy (using a simple parameterisationscheme) can provide also reasonablearea-averaged water vapour fluxes.     

Sensitivity of modeled tropical cyclone track and structure of hurricane Irene (1999) to the convective parameterization scheme

Summary The Betts-Miller and the Kain-Fritsch schemes are two of the many approaches to convective parameterization available to modelers. In the case of hurricane Irene (1999), the choice of parameterization markedly impacted the modeled track and structure of the hurricane and its subsequent extratropical transition. Specifically, in model runs using Betts-Miller, Irene recurved too early, causing the storm to weaken over the cool open ocean, delaying its transition, and changing the character of the storm. The Kain-Fritsch scheme more accurately reproduced the track of Irene and, hence, its interaction with upper-level features that caused extratropical transition and post-transition intensification. The two parameterizations produce different characteristic vertical warming profiles; the differences in warming are related to the structural differences in the simulated storm, affecting the hurricane response to its environment. Received October 13, 2001 Revised December 23, 2001     

沐川太平砂岩型铼钼（饿）矿点的地质特征和矿化时代

四川沐川县民主-太平-带含钼砂岩为一新矿化类型——沉积砂岩型铼钼（锇）矿点。X-射线粉晶衍射分析结果表明其中微-细晶鳞片状含钼矿物为晶质辉钼矿；高精度质谱分析发现辉钼矿中分散元素Re和铂族元素Os含量很高，具有重要的综合利用价值；高精度Re-Os同位素测年证明辉钼矿形成年龄与含矿的中生代红物学和矿床学均具有重要的理论意义和应用价值。     

An integrated hydrological model for rain‐induced landslide prediction

This paper describes an extension to the Combined Hydrology And Stability Model (CHASM) to fully include the effects of vegetation and slope plan topography on slope stability. The resultant physically based numerical model is designed to be applied to site‐specific slopes in which a detailed assessment of unsaturated and saturated hydrology is required in relation to vegetation, topography and slope stability. Applications are made to the Hawke's Bay region in New Zealand where shallow‐seated instability is strongly associated with spatial and temporal trends in vegetation cover types, and the Mid‐Levels region in Hong Kong, an area subject to a variety of landslide mechanisms, some of which may be subject to strong topographic control. An improved understanding of process mechanism, afforded by the model, is critical for reliable and appropriate design of slope stabilization and remedial measures. Copyright © 2002 John Wiley & Sons, Ltd.     

Pseudodynamic tests on rubber base isolators with numerical substructuring of the superstructure and strain‐rate effect compensation

A pseudodynamic testing procedure has been applied by which the seismic response of a base‐isolated building is obtained by using as specimen the isolators, while the superstructure is numerically simulated. The procedure also takes advantage of the continuous pseudodynamic testing capabilities of the ELSA laboratory, which increase the accuracy of the results and reduce the strain‐rate effect of the rubber bearings. A simple proportional correction of the measured forces compensates the remaining strain‐rate effect due to the unrealistic speed of the test. The correction factor is obtained by means of a characterizing test on the specific rubber isolators. The developed method has been successfully applied to the prediction of the seismic response of a base‐isolated four‐storey building submitted to several specified accelerograms. The results for those earthquakes as well as the effects of some changes of the parameters of the system are discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

Study of a semi‐active stiffness damper under various earthquake inputs

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

Approximate analysis methods for asymmetric plan base‐isolated buildings

An approximate method for linear analysis of asymmetric‐plan, multistorey buildings is specialized for a single‐storey, base‐isolated structure. To find the mode shapes of the torsionally coupled system, the Rayleigh–Ritz procedure is applied using the torsionally uncoupled modes as Ritz vectors. This approach reduces to analysis of two single‐storey systems, each with vibration properties and eccentricities (labelled ‘effective eccentricities’) similar to corresponding properties of the isolation system or the fixed‐base structure. With certain assumptions, the vibration properties of the coupled system can be expressed explicitly in terms of these single‐storey system properties. Three different methods are developed: the first is a direct application of the Rayleigh–Ritz procedure; the second and third use simplifications for the effective eccentricities, assuming a relatively stiff superstructure. The accuracy of these proposed methods and the rigid structure method in determining responses are assessed for a range of system parameters including eccentricity and structure flexibility. For a subset of systems with equal isolation and structural eccentricities, two of the methods are exact and the third is sufficiently accurate; all three are preferred to the rigid structure method. For systems with zero isolation eccentricity, however, all approximate methods considered are inconsistent and should be applied with caution, only to systems with small structural eccentricities or stiff structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Implications of the relationship between catchment vegetation type and the variability of annual runoff

The impact of changing catchment vegetation type on mean annual runoff has been known for some time, however, the impact on the variability of annual runoff has been established only recently. Differences in annual actual evapotranspiration between vegetation types and the potential effect of changing vegetation type on mean annual runoff and the variability of annual runoff are briefly reviewed. The magnitude of any change in the variability of annual runoff owing to a change in catchment vegetation type is related to the pre‐ and post‐change vegetation types and the seasonality of precipitation, assuming that the variability of annual precipitation remains constant throughout. Significant implications of the relationship between vegetation type and the variability of annual runoff are presented and discussed for water resource management, stream ecology and fluvial geomorphology. Copyright © 2002 John Wiley & Sons, Ltd.     

海底天然气渗漏形成水合物量的线性动力学模型:以墨西哥湾GC185区块Bush高地为例

世界许多地区如墨西哥湾，存在着大量天然气渗漏并形成水合物的现象，出于科学，生态，气候和安全的需要。人类有必要弄清存在于海底以水合成形式存在的天然气的比例。因此，构建了水合物形成量的线性动力学模型，以分析墨西哥湾GC185块区Bush高地海底渗漏天然气的地质过程和行为。Bush高地渗漏的天然气来源于附近的Jolliet气藏，结果表明，渗漏天然气中约有9％的海底形成了水合物。