Weathered rockfill materials, characterized by a mixture of soil matrix and rock aggregates, are widely distributed in mountainous areas. These soils are frequently used for subgrade or riprap in engineering practice, and the mobilized shear strength is crucial for analyzing the displacement and stability of these geo-structures. A series of direct shear tests are performed on a gap-graded soil with a full range of coarse fraction. The behavior of gap-graded soils is analyzed, and a simple model is proposed for the evolution of mobilized stress ratio during direct shearing process based on mixture theory. The change of inter-aggregate configuration is incorporated by introducing a structure variable which increases with coarse fraction and decreases approximately linearly with the overall horizontal shear strain in double logarithmic plot. It reasonably reflects a gradually transformation from a matrix-sustained structure into an aggregate-sustained one with the increase of coarse fraction. The model has four parameters, and at least two direct shear tests need to be done for the calibration. Validation of the model is done by using the test data in this work and those from the literature.
The Qiangtang basin is located between Kekexili-Jingshajiang suture belt and Bangong-Lujiang suture belt, and is divided into the north part and south part by the central uplift that has no crop out of Mesozoic strata. When the Jinshajiang Ocean was closed, the subducting plate was subducted southward. In the central part of the Qiangtang basin, the cushioning effect of the asthenosphere resulted in the thermal doming of the mantle and subsequent large-scale anatexis. Mantle source materials and antectic materials were upwelled and extruded into the middle crust, leading to the thickening of the middle crust and the heating and weakening of the middle to upper crust, and resulting in the rapid deformation (detachment) and tectonic erosion, and in the isostatic uplifting and the formation of metamorphic core complex. The upwelling of anatectic materials would further enhance the buoyant repercussion, which would combine with the side stress due from extrusion in resulting in the formation of an extension 相似文献
An improvement on the new method of Intervalhalving-Scanning (INS) proposed by the senior author for derivation of thermodynamic properties of minerals from reversed experiment (REP) data has been made in the present work. The treatment of the REP data of 6 reactions in the system MgO-SiO_2-H_2O and the derivation of △_(?)H(?) (298. 15K) for minerals Talc,Forsterite and Anthophyllite are chosen as an example for demonstration of the application of the method.INS is quite different from all the methods for the derivation in the literature and throughout based on thermodynamic principles and equations so that its thermodynamical validity is thoroughgoing. 相似文献
Research on land use cover change (LUCC) has reached a mature stage and has formed a relatively complete scientific system. However, most studies analyzed the LUCC process from the view of land use types ignoring the integrality and systematicness of the land use system, which brought certain constraints to understanding the complexity and systematicness of land use process scientifically. Using the Modern Yellow River Delta (MYRD) of China as the study area, this research introduced the complex network analysis method to the study of the LUCC process by using 9 periods of land use data between 1976 and 2014 to build 8 stages of complex networks. The values of node degree, betweenness, changing proportions, and average shortest path in the networks were calculated to identify the key land use types, changing models of land use types, and the stability of land use system. Additionally, main parts of complex networks of the period from 1976 to 1995 and the period from 1995 to 2014 were selected to evaluate the changing characteristics of the LUCC process. The results indicated the area and proportion of natural wetland kept reducing, but the area and proportion of artificial wetland or non-wetland continued rising. The bare land, reed, bush, and cultivated land were the key land use types of the LUCC process. In the past 38 years, beach, bare land, reed and bush had been the output types, and the building land and salt pan had been the input types. The LUCC process has been a transfer process of natural wetland to artificial wetland and non-wetland in the past 38 years, which could be divided into land accretion process (1976 to 1995) and construction process (1995 to 2014). The land ecosystem was unstable for the period from 1990 to 2006. 相似文献
In order to study the degree of influence and control mechanism to groundwater flow field caused by land creation engineering in the hilly and gully area of the Loess Plateau, based on the geological and engineering conditions of the first stage project of Yan’an new district in China, numerical simulation of groundwater flow is carried out by the Feflow and GIS technologies. From the simulation, punning measure relatively reduces infiltration recharge and artificial gravel drain increases groundwater seepage. The basic characteristics of groundwater flow field is controlled by the old and new topographies in the whole study area, and artificial gravel drain plays an auxiliary role in accelerating groundwater drawdown upstream and promotes groundwater rise downstream. According to differences of groundwater level and declining percentages of hydraulic gradient in the main and secondary gullies, dewatering of artificial gravel drain in the secondary gully is more effective than that in the main gully, which will yet play an important role in the future. The study results will make contributions to understand groundwater response to land creation engineering and will be beneficial to take necessary measures to prevent collapse of loess and failure of building foundation in the hilly and gully area of the Loess Plateau. 相似文献
The determination of in situ stresses is very important in petroleum engineering. Hydraulic fracturing is a widely accepted technique for the determination of in situ stresses nowadays. Unfortunately, the hydraulic fracturing test is time-consuming and expensive. Taking advantage of the shape of borehole breakouts measured from widely available caliper and image logs to determine in situ stress in petroleum engineering is highly attractive. By finite element modeling of borehole breakouts considering thermoporoelasticity, the authors simulate the process of borehole breakouts in terms of initiation, development, and stabilization under Mogi-Coulomb criterion and end up with the shape of borehole breakouts. Artificial neural network provides such a tool to establish the relationship between in situ stress and shape of borehole breakouts, which can be used to determine in situ stress based on different shape of borehole breakouts by inverse analysis. In this paper, two steps are taken to determine in situ stress by inverse analysis. First, sets of finite element modeling provide sets of data on in situ stress and borehole breakout measures considering the influence of drilling fluid temperature and pore pressure, which will be used to train an artificial neural network that can eventually represent the relationship between the in situ stress and borehole breakout measures. Second, for a given measure of borehole breakouts in a certain drilling fluid temperature, the trained artificial neural network will be used to predict the corresponding in situ stress. Results of numerical experiments show that the inverse analysis based on finite element modeling of borehole breakouts and artificial neural network is a promising method to determine in situ stress. 相似文献