美国地质灾害防治现状综述

地质灾害的防治研究受到世界各国的广泛重视,本文从地灾防治基础理论、职能部门工作方式入手,对美国科研界的非饱和土理论最新研究进展、美国地质调查局(USGS)地质灾害防治中心的日常工作形式进行了较为全面的阐述。除此之外,还结合作者自身参与的滑坡灾害调研活动,对美国科研人员的野外基本工作方法、野外工作的最主要目的进行了描述。在此基础上,还对中美两国地灾防治现状进行了简要对比,本文所阐述的内容可为相关领域的研究人员提供一定的参考。     

中侏罗世漠河盆地南缘构造特征及地质意义

通过对漠河盆地南缘地层层序、构造特征等进行的实际地质调查,认为漠河盆地南部盖层主要为中侏罗统的河流相、河漫滩相、湖相沉积岩以及上侏罗统和白垩纪火山岩,盆地南部受拉张作用影响,正断层、铲形断裂发育,盆地南缘具断陷盆地特征,盆地形成时间较长.同时厘定出漠河盆地南部边界位于绣峰林场二支线附近.     

东濮凹陷沙三段致密砂岩储层裂缝形成机制及对储层物性的影响

为探讨东濮凹陷沙三段储层裂缝的发育特征、形成机制、主控因素及其对储层的影响,综合运用岩心观察、薄片鉴定、扫描电镜、流体包裹体分析等方法对裂缝进行了研究。结果表明:东濮凹陷沙三段储层中发育的裂缝按规模可分为宏观裂缝和微观裂缝两大类,按成因可分为构造缝、超压缝和成岩缝。构造缝走向以NNE向、NE向为主,其形成可分为两期,分别为40～35 Ma沙河街组沉积中后期和25～18 Ma东营组沉积末期。超压缝的形成与膏盐脱水、烃类充注和膏盐层封堵作用有关,形成于33～25 Ma东营组沉积时期。压实作用、溶解作用、收缩作用等成岩作用均可形成微裂缝。裂缝的形成序列为:早期构造缝-压裂缝-溶解缝-超压缝-收缩缝-晚期构造缝-溶解缝-压裂缝;裂缝的发育可以改善储层物性,宏观裂缝主要起渗流作用,微观裂缝既可作为有效的储集空间,又可作为酸性流体流动通道,产生次生孔隙带,提高储层孔隙度。     

川西拗陷上三叠统气田水化学形成演化的重溯

本文在研究区沉积演化、构造演化和上三叠统含水系统、水文地质期定位的基础上,论证了T_3x~2水起源于35 g/kg的海相同生沉积盐水,经历了沉积、沉压埋藏、构造热液3个"期"的浓缩盐化正向变质,演化成为最高浓度160 g/kg的海相后生沉积孔隙裂隙卤水、浓卤水;T_3x~4、T_3x~6水均起源于陆相同生沉积淡水,T_3x~4经历了沉积、沉压埋藏-淋滤、沉压埋藏、构造热液4个"期".主要是高度浓缩盐化正向深变质,演化成为最高浓度100 g/kg的后生沉积孔隙裂隙盐卤水;T_3x~6与T_3x~2经历的期相同,经高度浓缩盐化正向深变质,演化成为最高浓度84 g/kg的后生沉积孔隙裂隙盐卤水.     

频率域航空电磁系统一次磁场自动补偿技术

为了提高三频航空电磁系统(FAEM)测量的自动化程度,设计实现了基于模糊控制和线性增量控制方法相结合的电磁补偿系统,来完成高精度、高稳定性、大动态范围的电磁补偿.以航空电磁接收机输出的电磁场实、虚分量值为控制的输入参量,以补偿线圈内的补偿电流为控制对象,80C52单片机为控制芯片,采用FFSI法推理程序实现补偿量的模糊控制,从而实现一次场和涡流场的实时程控补偿.航空电磁系统实验飞行数据表明,该控制系统可以快速实现一次磁场的实时高精度补偿,稳定性和补偿噪声水平能满足系统设计要求.     

Results for Rarely Determined Elements in MPI-DING, USGS and NIST SRM Glasses Using Laser Ablation ICP-MS

New analytical results are reported for rarely determined elements Be, B, Ge, As, Mo, Rh, Pd, Ag, Cd, In, Sn, Sb, W, Re, Ir, Pt, Au, Tl and Bi in MPI‐DING and USGS (BCR‐2G, BHVO‐2G, BIR‐1G) silicate glasses and the NIST SRM 610‐614 synthetic soda‐lime glasses using 193 nm ArF excimer laser ablation and quadrupole ICP‐MS. The method used involved external calibration against GOR132‐G for Ir and NIST SRM 610 for other elements, internal standardisation using Ca, and ablation with a crater diameter of 160 μm and a pulsed laser repetition rate of 10 Hz. Small amounts of nitrogen (5 ml min^?1) were added to the central channel gas of the plasma to improve the limits of detection for most of these elements by a factor of 1.2–2.5 and to reduce the oxide interference level to 0.02% (ThO⁺/Th⁺). Under these conditions, the LODs for most of these rarely determined elements were within the range 0.1 to 10 ng g^?1. The operating conditions that were required to minimise ICP‐induced fractionation (U⁺/Th⁺≈ 1) in the mode without nitrogen were accompanied by a 50–60% reduction in sensitivity for elements such as Ca, Au and Pt. In contrast, ICP‐induced fractionation could be minimised (U⁺/Th⁺≈ 1) with no loss of analyte sensitivity in the nitrogen mode. Interferences of CuAr⁺, ZnAr⁺, Cd⁺, Pb²⁺ and Sn⁺ on Pd⁺, Rh⁺, Cd⁺ and In⁺ were corrected. Oxide interferences were not considered due to their lower production rate. Analytical precision, as given by one relative standard deviation (% RSD) was less than 15% for most of the elements present at concentrations greater than 0.1 μg g^?1. A significant negative correlation was found between logarithmic concentration and logarithmic RSD, with a correlation coefficient of ?0.76. This trend indicates that possible chemical heterogeneities for most of these elements are smaller than the analytical uncertainty. Our results for Be, B, Ge, Sb and W are generally in good agreement with their reference values. In contrast, other elements in many of the reference glasses have only information values, upper limits or even no values, which restrict any detailed evaluation of the accuracy of the determined values. However, concentrations from multiple isotopes of one element analysed in this study showed excellent agreement, which guarantee the quality of our data to a certain extent.     

地质工程专业发展战略研究

从地质工程人才培养角度,重点分析了地质工程专业教育的现状,根据社会对人才的需求、科技进步和地质工程所面临的发展实际,从可持续发展战略的高度阐述了地质工程素质人才教育所需要采取的对策.     

Study on Strength Influence Mechanism of Fiber-Reinforced Expansive Soil Using Jute

This study was undertaken to research the effects of jute fiber content, fiber length, water content and dry density of reinforced and unreinforced soil on the strength influence mechanism by implementing a series of laboratory tests and analysis. The most efficient fiber reinforcement effects was achieved by means of adding jute fiber with content of 0.6 % and length of 6 mm into expansive soil specimen prepared at maximum dry density and optimum moisture content. The cohesion of reinforced specimens increased first with increasing fiber content and fiber length and then decreased with further increase in fiber content and fiber length. The internal friction angle of reinforced specimens were not affected significantly by fiber content and fiber length. Higher water content reduces the fiber reinforcement effects by means of acting as lubricant in the interface of fiber and soil particles. Fiber reinforcement effects is more prominent for specimens prepared at higher dry density by increasing the effective contact area of fiber/soil. The application prospect of soil reinforcement using natural fiber is impeded by the hydrophilic nature and biodegradability of natural fiber, thus, studies on using chemical additive to do surface treatment for natural fiber are needed to improve the interfacial interaction of fiber/soil so as to widen the application of natural fiber.     

Ablation Characteristic of Ilmenite using UV Nanosecond and Femtosecond Lasers: Implications for Non‐Matrix‐Matched Quantification

Ilmenite (FeTiO₃) is a common accessory mineral and has been used as a powerful petrogenetic indicator in many geological settings. Elemental fractionation and matrix effects in ilmenite (CRN63E‐K) and silicate glass (NIST SRM 610) were investigated using 193 nm ArF excimer nanosecond (ns) laser and 257 nm femtosecond (fs) laser ablation systems coupled to an inductively coupled plasma‐mass spectrometer. The concentration‐normalised ⁵⁷Fe and ⁴⁹Ti responses in ilmenite were higher than those in NIST SRM 610 by a factor of 1.8 using fs‐LA. Compared with the 193 nm excimer laser, smaller elemental fractionation was observed using the 257 nm fs laser. When using 193 nm excimer laser ablation, the selected range of the laser energy density had a significant effect on the elemental fractionation in ilmenite. Scanning electron microscopy images of ablation craters and the morphologies of the deposited aerosol materials showed more melting effects and an enlarged particle deposition area around the ablation site of the ns‐LA‐generated crater when compared with those using fs‐LA. The ejected material around the ns crater predominantly consisted of large droplets of resolidified molten material; however, the ejected material around the fs crater consisted of agglomerates of fine particles with ‘rough' shapes. These observations are a result of the different ablation mechanisms for ns‐ and fs‐LAs. Non‐matrix‐matched calibration was applied for the analysis of ilmenite samples using NIST SRM 610 as a reference material for both 193 nm excimer LA‐ICP‐MS and fs‐LA‐ICP‐MS. Similar analytical results for most elements in ilmenite samples were obtained using both 193 nm excimer LA‐ICP‐MS at a high laser energy density of 12.7 J cm^?2 and fs‐LA‐ICP‐MS.     

干旱地区水循环过程中的地下水化学特征研究——以蒙古国前巴音钼矿水源地为例

地下水的水化学类型在径流过程中会不断变化,并在径流与赋存的不同状态下体现出不同特征,体现出不同的地下水运移规律。本文以蒙古国前巴音钼矿水源地为例,选取水源地范围内的19个钻孔水样进行分析,取得了主要阴阳离子、TDS和水化学类型等数据。通过对地下水化学的空间分布特征、TDS值的变化和主要阴阳离子的演化规律进行研究发现:研究区水源地地下水补给来源为大气降水,沟谷东部地区的水循环强度高于西南部地区,外围地区最弱,地下水的水平径流较弱小于垂向;受水循环强度影响沟谷东部形成地矿化度的HCO_3型水,西南部形成HCO_3·Cl·SO_4、HCO_3·SO_4·Cl、HCO_3·SO_4型水,沟谷外围地区形成SO_4·HCO_3·Cl、Cl·SO_4·HCO_3、SO_4·HCO_3、Cl·SO_4型水,干旱地区水循环强度和补径排条件的差异会形成不同的水化学类。