Causes and consequences of recent floods in the Golestan catchments and Caspian Sea regions of Iran

In August 2001, the worst flash flooding event of the Caspian Sea regions in over two centuries claimed over 300 lives after a weekend of heavy rainfall and brought about a devastating disaster in the Mother-Soo catchment, province of Golestan, Iran. As a result of this event, a series of site investigation were carried out to identify the pertinent factors that led to a flood of this magnitude. This paper identifies the fundamental causes of the frequent floods and debris flow occurrence in the area prone to flooding and analyzes the main runoff mechanism of these events. The maximum observed 24-h rainfall depths and maximum peak discharges at the existing gauges were compared with the depths of rainfall and the peak values corresponding to the August 2001 flood respectively. For the majority of the rain gauges, the rainfall depth exceeded those of historical recorded events. In Golestan dam, an increase of 7.5 times the maximum value observed in the past 20 years was noted. The flood height was 10–15 m while passing through the middle subcatchment area of Golestan National Park. The preliminary evaluation indicates the existence of bare soil in the catchment, movable material, steep slopes, high rainfall intensity, deterioration of pasture and forest land, and inappropriate agriculture and development practices as well as climate change were the main factors for the occurrence and the extent of the August 2001 disaster. Finally, due to the likelihood of flooding and debris flow events in future, some countermeasures are proposed.     

Using a modern analogue to interpret depositional position in ancient fluvial-tidal channels: Example from the McMurray Formation,Canada

The fluvial–tidal transition (FTT) is a complex depositional zone, where fluvial flow is modified by tides as rivers approach a receiving marine basin. Variations in the relative importance of tidal versus fluvial processes lead to a distinctive distribution of sediments that accumulate on channel bars. The FTT generally consists of three broad zones: (1) a freshwater-tidal zone; (2) a tidally influenced freshwater to brackish-water transition; and (3) a zone of relatively sustained brackish-water conditions with stronger tides. A very common type of deposit through the fluvial–tidal transition, especially on the margins of migrating channels, is inclined heterolithic stratification (IHS). At present, a detailed account of changes in the character of IHS across the FTT of a paleo-channel system has not been reported, although a number of modern examples have been documented. To fill this gap, we quantitatively assess the sedimentology and ichnology of IHS from seven cored intervals in three geographic areas situated within the youngest paleovalley (“A” Valley) in the Lower Cretaceous McMurray Formation of Alberta, Canada. We compare the data to trends defined along the FTT in the present-day Fraser River in British Columbia, Canada to interpret paleo-depositional position in the ancient fluvial–tidal channels.Analysis determined that the mean mudstone thickness is 8.2 cm in the southern study area (SA). Mean thickness increases to 11 cm in the central study area (CA), and decreases again to 4.4 cm in the northern study area (NA). The proportion of mudstone is 31% in SA, 44% in CA, and 27% in NA. Thickness-weighted mean bioturbation intensity in sands varied from 0.29 in SA and CA, to 0.28 in NA. On the other hand, thickness-weighted mean bioturbation intensity (BI) in mudstone increases from 1.46 in SA, to 1.77 in CA, and is 1.94 in NA. The ichnological diversity also increased from south to north.Sedimentological results show similar trends to those of the Fraser River, enabling the identification of a freshwater to brackish-water transition zone with tidal influence. The interpreted position of the transition is underpinned by the bioturbation intensity and trace-fossil diversity trends, indicating periodic brackish-water conditions throughout SA in the McMurray Formation during low river flow conditions. Together, these data suggest that a broad FTT existed in the “A” Valley, with fluvial-dominated channels to the south that experienced seasonal brackish-water inundation during base flow, and channels experiencing increasing brackish-water influence lying further north towards a turbidity maximum zone. The FTT zone appears to have extended for several hundred kilometers from south to north.Based on the sedimentological and ichnological data, as well as estimations of lateral accretion rates, we refute the commonly applied Mississippi River depositional analogue for McMurray Formation channels. Rather, we show that while not a perfect fit, the tidally influenced Fraser River shows much greater agreement with the depositional character recorded in McMurray Formation IHS. Future work on the McMurray system should focus on characterizing tide-dominated deltaic and estuarine systems, such as the Ganges-Brahmaputra, and on forward-modeling the evolution of tide-dominated and tide-influenced river systems.     

Occurrence of uraniferous iron and manganese oxides in biotite granite North East Gabal El Sela area, South Eastern Desert, Egypt

Optical microscopy, X-ray diffraction (XRD), and back-scattered electron imaging (BSE) have been used to determine the mineralogical composition of the uraniferous iron and manganese oxides and the associated U-minerals hosted in biotite granite that occurred north east Gabal El Sela area south Eastern Desert, Egypt. These mineralizations were found as veinlets fractures filling associated with strongly kaolinitic alteration of the coarse-grained biotite granite. XRD determined that the geothite mineral form the main constituent of uraniferous iron oxide in addition to tapiolite, and kaolinite minerals, where as uraniferous manganese oxide composed of pyrolusite, ramsdellite, and cryptomelane. BSE confirmed that the associated uranium minerals represented by uranothorite, kazolite, and zentime in addition to columbite-bearing minerals. Uranothorite and columbite-bearing minerals are the most abundant minerals in this mineralization. Petrographically, biotite granite is composed mainly of quartz, in addition to K-feldspars, biotite and muscovite with minor zircon, garnet, apatite, uranium-rich thorite and iron oxide. Petrochemical studies and tectonic discrimination diagrams for this granite reveal that they are classified as granite to alkali feldspar granite, originated from calc-alkaline magma having peraluminous nature and developed in within-plate tectonic environment. Field radiometric measurements revealed the localization of two high radiometric anomalies associated with iron and manganese oxides, within this anomaly uranium content range from 65 to 85 ppm. Alpha Track-etch Detectors of radon gas registrations revealed high track density reach up to 15,448.7 Bq/m³.