Rice paddies as a methane source

Rice fields are considered to be among the highest sources of atmospheric methane, an important source of global warming. In order to meet the projected rice needs of the increasing world population, it is estimated that the annual world's rough rice production must increase to 760 million tons (a 65% increase) in the next 30 years. This will increase methane emissions from ricefields if current technologies are kept. Methane emissions from ricefields are affected by climate, water regime, soil properties, and various cultural practices like irrigation and drainage, organic amendments, fertilization, and rice cultivars. Irrigated rice comprises 50% of the world-harvested rice area and contributes 70% to total rice production. Because of assured flooding during the growing period it is the primary source of methane. Rainfed rice emits less methane due to periods of droughts. Upland rice, being never flooded for a significant period of time, is not a significant source of methane. There is great potential to develop no regret mitigation options that are in accordance with increasing rice production.     

Palomar prime-focus infrared camera (PFIRCAM)

In a joint effort between engineers and scientists at the Jet Propulsion Laboratory and the California Institute of Technology, a near-infrared (0.8–2.6 m) direct imaging system has been developed and integrated into the Caltech Palomar Observatory detector series. The camera system has been tested and operated in a science mode at the prime-focus (f/3.3) of the Hale 5-m Telescope. This paper outlines the system components and performance, including discussion of the detector linearity.     

A model of impulsive loop flares revisited

A critical examination of the components of the recent impulsive loop flare model of Takakura is made. It is found that his analysis of the stability of the electron distribution resulting from anomalous heat conduction is in error and electron plasma waves would not be excited. Rather, in the regions where the electron/proton temperature ratioT _e/T _i 10, electrostatic ion-cyclotron waves would be excited and in the regions whereT _e 10, ion-acoustic waves would be excited. Ratios ofT _e/T _i 10 occur only in the late time development behind the conduction fronts. Since the anomalous resistivity due to electrostatic ion-cyclotron waves is fortuitously about 70% of the one used by Takakura, the general development will follow closely the one calculated by him. Because the anomalous resistivity due to ion-acoustic waves is about 95 times the one used by Takakura, the development in the parts of the loop whereT _e/T _i 10 for late times would be altered considerably.Also Guest Worker at NOAA Space Environment Laboratory, Boulder, Colorado, U.S.A.     

Fine structure in a metric type IV burst: Multi-site spectrographic,polarimetric, and heliographic observations

The spectral fine structure of solar radio continua is thought to reveal wave-particle and wave-wave interactions in magnetic traps in the solar corona. We present observations of spectra, polarization, and spatial characteristics of combined emission/extinction features (zebra patterns) during a decimetric/metric type IV event on 5 June, 1990. Very high modulation depths are observed. The size and location of the sources during emission and extinction are determined for the first time. Two remarkable features are found: (1) The sources of emission stripes have finite size, up to nearly 2; during extinction stripes the brightness is reduced across the whole extent of the unperturbed continuum, which is slightly larger than 2. (2) During emission stripes the sources drift over distances up to several × 10⁴ km, with apparent velocities up to 10⁵ km s^–1. The observed features are briefly discussed with respect to interpretations based on wave-particle interactions and on the scattering of electromagnetic waves.     

Deposition and diagenesis of the lacustrine-fluvial Cangfanggou Group (uppermost Permian to Lower Triassic), southern Junggar Basin,NW China: a contribution from sequence stratigraphy

The Junggar Basin in NW China contains lacustrine hydrocarbon source rocks which are among the highest quality of hydrocarbon potential in the world. Oil reservoirs in the basin are very substantial: target reservoirs span Carboniferous to Tertiary strata and include Permo-Triassic lacustrine and fluvial sandstones. The Junggar Basin was a foreland basin during the late Permian to Cenozoic, possibly with strike-slip tectonics at the southern margin during Mesozoic time. The Cangfanggou Group, as one of the major reservoirs, is well-exposed in the eastern part of the southern Junggar Basin. A measured outcrop section and a number of borehole logs coupled with resistivity logs were used to attempt sequence stratigraphic analysis. Detailed sedimentological studies on the outcrops and borehole cores have demonstrated that the Cangfanggou Group is characterized by alternating lacustrine and fluvial deposits. Four depositional sequences have been recognized. For each sequence, the basal boundary is marked by erosional truncation of fluvial channel conglomeratic sandstones in sharp contact with underlying lacustrine or floodplain mudstones. The top of each lowstand systems tract is normally overlain by the transition to lacustrine or maximum flooding surface. The transgressive systems tract is normally not identifiable at the basin margin, but was developed in the basinward area and characterized by interbedded fining-upward distal fluvial and shallow lacustrine deposits. The highstand systems tract at the basin margin is characterized by very thick floodplain mudstones or shallow lacustrine deposits, and by typical coarsening-upward parasequences of shallow lacustrine deposits in more basinward areas. Sediment input to the basin was controlled by tectonics and climate. Depositional sequences were probably controlled by fluctuating change of lake level: this was in turn controlled by climate (runoff), modified by tectonics in specific areas.The sandstones studied are exclusively volcanic litharenites. Diagenetic studies suggest that the calcite cementation, pore-filling clay minerals and zeolites occluded substantial porosity in the sandstones examined because they are compositionally immature. However, notable secondary porosity in varying proportions is present in the sandstones of the Cangfanggou Group, resulting from the dissolution of unstable detrital grains. The lowstand fluvial/distal fluvial sandstones recorded the highest average porosity and highest permeability, in which some primary porosity may remain because early formed clay coatings inhibited further compaction. The combination of residual primary porosity and significant amount of secondary porosity in the sandstones of the Cangfanggou Group may constitute moderate to good reservoirs. In contrast, the lacustrine fine-grained sandstones is characterized by clay authigenesis and zeolitization, in which the porosity was obliterated by the zeolites and extensive illitization; the lowstand fluvial channel sandstones in the basin margin areas are characterized by extensive calcite cementation which greatly reduced the porosity and permeability.This is the fifth paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits.     

A verification of some methods to determine the fluxes of momentum,sensible heat,and water vapour using standard deviation and structure parameter of scalar meteorological quantities

A set of micro-meteorological data collected over a horizontal, uniform terrain (the plain of La Crau, France) in June 1987 is analysed. Conditions were predominantly sunny and arid, while due to the Mistral the wind speed could exceed 10 m/s. Verification of several methods to evaluate surface fluxes of heat, momentum and water vapour from the standard deviation of temperature, wind and specific humidity is presented. Also, a similar approach using the structure parameter of temperature is considered. These methods are all based on Monin-Obukhov (M-O) similarity theory. It is found that the standard deviation of temperature, vertical and horizontal wind speed as well as the structure parameter for temperature behave according to M-O similarity. It is shown that the sensible heat flux and friction velocity can be determined from a fast response thermometer and a cup anemometer. Also, it appears that the analytic solution of the set of governing equations as derived by the first author yields good results. M-O theory does not appear to work for the standard deviation of specific humidity. This may be due to the relative importance of large eddies.     

Kinetics of peptide hydrolysis and amino acid decomposition at high temperature

Dipeptide hydrolysis and amino acid decomposition appear to follow a first-order rate law. The hydrolysis rate increases exponentially with increasing temperature in aqueous solution at both 265 atm and water steam pressures over the temperature range of 100 to 220 degrees C. Dipeptide hydrolysis has a lower apparent activation energy at 265 atm (44.1 KJ/mol) than at water steam pressure (98.9 KJ/mol). At lower temperatures (<200-220 degrees C), the rate of peptide bond hydrolysis is faster at 265 atm than at water steam pressure. At higher temperatures (>200-220 degrees C), however, peptide bond hydrolysis is slower at 265 atm than at water steam pressure. In aqueous solution, amino acid decomposition rates also increase exponentially with increasing temperature. Amino acid decomposition rates are much higher at 265 atm than at water steam pressure over the entire temperature range investigated.     

Re-evaluation of lead isotopic data,southern Massif Central,France

Three independent Pb isotope homogenizing processes operating on large volumes of rock material during limited intervals in the Phanerozoic have been used to define a unique evolutionary curve for rock and ore lead isotopic compositions of the southern Massif Central, France. The model is

Multiple Enrichment Processes and their Relationships in the Subcrustal Lithosphere Beneath the Eifel (Germany)

Three types of enrichment processes may be distinguished inspinel peridotite mantle xenoliths from the West Eifel (Germany):

1. Enrichmentof light rare earth elements (LREE) occurs in wholerocks andclinopyroxenes in conjunction with the formation ofTi-pooramphiboles (<0•5%) in a low-tempetature suite(900C).
2. Enrichment in high field strength elements (HFSE; Ti and Hf)is associated with strong zoning of TiO₂ in amphibole adjacentto mica hornblendite veins. A reheating from 900 to 1050C associatedwith this vein formation is reflected by the zoning profilesin orthopyroxenes with Ca, Al, and Cr increasing from core torim.
3. Moderate enrichment of LREE without amphibole formationin ahigh-temperature suite (1125C) is observed at the contactofperidotites to pyroxenite veins yielding the same temperature.
4. Based on geochemical and isotopic evidence, enrichment process(1) is inferred to be due to interaction of peridotites fromthe subcrustal lithosphere with low-density fluids. Process(2) represents a subsequent interaction of amphibole-bearingperidotites formed during the first process with basic meltsmoving through a system of cross-cutting dykes and veins. Processes(2) and (3) are linked to the Quaternary West Eifel volcanism.Geothermobarometry of the xenoliths shows that these processesare related to different depth regimes of the lower lithosphere.

     

Stratiform and vein U,Mo and Cu mineralization in the Novoveská Huta area,CSFR

U-Mo and Cu mineralization occurs in horizons as well as in veins in the Permian formations near Novoveská Huta. Ore mineralization is represented by uraninite, U-Ti oxides, coffinite, molybdenite, chalcopyrite, tennantite and pyrite. The isotopic composition of S and C displays a larger variability in the stratiform ores (³⁴S from –32.7 to +2.7 and ¹³C from –27.1 to — 0.5) These data suggest mixing of meteoric solutions with fluids of volcanic origin and a complex history. There is a narrower range of ³⁴S from –18.8 to –4.6 and ¹³C from –6.3 to –2.5% in quartz-carbonate veins with Cu mineralization suggesting a deep source of ore-bearing solutions. The Permian volcanics were a significant source of ore elements.Their contents of U, Mo, Cu and Y are from two to eight times higher than in sedimentary rocks. Accumulations of ore elements in the horizons were formed by the reduction and adsorption processes 240 ± 30 Ma ago according to U-Pb isotopic dating. Due to Alpine tectonism, these low-grade ores (U<0.1 wt%) were remobilized and higher-grade U-Mo ores (U>0.1 wt%) were formed 130 ± 20 Ma ago at temperatures ranging from 110 to 120° C, according to fluid inclusions. Younger veins with Cu mineralization were formed 115 ± 10 Ma according to the model age of Pb at temperatures ranging from 95 to 190°C.