A synthesis map of the sky at 34.5 MHz

This paper describes a wide-field survey made at 34.5 MHz using GEETEE,1 the low frequency telescope at Gauribidanur (latitude 13°36′12′′N). This telescope was used in the transit mode and by per forming 1-D synthesis along the north-south direction the entire observable sky was mapped in a single day. This minimized the problems that hinder wide-field low-frequency mapping. This survey covers the declination range of-50° to + 70° (- 33° to +61° without aliasing) and the complete 24 hours of right ascension. The synthesized beam has a resolution of 26′ x 42′ sec (δ- 14°. 1). The sensitivity of the survey is 5 Jy/beam (1σ). Special care has been taken to ensure that the antenna responds to all angular scale structures and is suitable for studies of both point sources and extended objects This telescope is jointly operated by the Indian Institute of Astrophysics, Bangalore and the Roman Research Institute, Bangalore.     

Formation and cooling of the giant HXIS arches of November 6–7, 1980

Giant arches, first detected by the HXIS instrument aboard SMM, are still a poorly understood component of the flare scenario. Their origin remains uncertain and their behavior, quite different in separate events, has not yet been satisfactorily explained. The purpose of the present paper is to analyze the giant arches imaged on November 6–7, 1980, which, in contrast to that observed on May 21, 1980, were not stationary and had shorter cooling times. In particular, we use a procedure, already applied to the May 21 case, to compute the three-dimensional topology of the magnetic field which forms by reconnection over the active region containing the November arches. This technique allows us to verify that the observed structures are aligned with the computed field lines, lending support to the hypothesis that they originate through a reconnection process which occurs at progressively larger altitudes. Moreover, a calculation of the magnetic energy liberated by reconnection shows that enough energy may be thereby released to account for the observed thermal energy enhancement of the HXIS arches. Finally, the lifetime of the features is shown to be consistent with that predicted by cooling via radiation and field-aligned conduction to the underlying chromosphere.     

Magnetohydrodynamic flow of a non-Newtonian fluid past a porous plate

This article studies the laminar flow of an electrically conducting non-Newtonian fluid (Rivlin-Encksen type) past an infinite porous flat plate to a step function change in suction velocity in the presence of a transverse magnetic field. The Laplace transform technique has been employed to solve the basic differential equations. The solutions of the velocity profile and skin-friction are obtained and the effects of the visco-elastic parameter, the magnetic field and the time parameter on the fluid flow have been studied in several tables.     

Numerical models of subduction and forearc deformation

Summary. Finite element models for shallow subduction produce realistic behaviour for a wide variety of mechanical strength and density distributions. Characteristic displacements are found to occur even without a discrete low-strength megathrust if there is a high-density subducted plate to localize lithospheric compression. A high-density plate is itself unnecessary in the presence of a low-strength megathrust and regional compression.
Successful finite element models produce an outer arc at the top of the trench slope, and forearc basin with geometry characteristic of natural analogues. These structural features occur by upward inelastic bending of the lithospheric wedge overlying the megathrust. This mechanically unstable behaviour may dissipate significant energy and cause the megathrust to migrate continuously by accretion, tectonic erosion, or abandonment and reinitiation farther offshore. Upward bending in the overriding plate is promoted by low megathrust dip, low megathrust shear strength, and high horizontal compression in the overriding plate.     

Lithium abundance in cold giants

Byurakan Astrophysical Observatory. Translated from Astrofizika, Vol. 33, No. 2, pp. 271–281, September–October, 1990.     

Reef exploration in the East Sengkang Basin,Sulawesi, Indonesia

Reconnaissance seismic shot in 1971/72 showed a number of well defined seismic anomalies within the East Sengkang Basin which were interpreted as buried reefs. Subsequent fieldwork revealed that Upper Miocene reefs outcropped along the southern margin of the basin. A drilling programme in 1975 and 1976 proved the presence of shallow, gas-bearing, Upper Miocene reefs in the northern part of the basin. Seismic acquisition and drilling during 1981 confirmed the economic significance of these discoveries, with four separate accumulations containing about 750 × 10⁹ cubic feet of dry gas in place at an average depth of 700 m. Kampung Baru is the largest field and contains over half the total, both reservoir quality and gas deliverability are excellent. Deposition in the East Sengkang Basin probably started during the Early Miocene. A sequence of Lower Miocene mudstones and limestones unconformably overlies acoustic basement which consists of Eocene volcanics. During the tectonically active Middle Miocene, deposition was interrupted by two periods of deformation and erosion. Carbonate deposition became established in the Late Miocene with widespread development of platform limestones throughout the East Sengkang Basin. Thick pinnacle reef complexes developed in the areas where reef growth could keep pace with the relative rise in sea level. Most reef growth ceased at the end of the Miocene and subsequent renewed clastic sedimentation covered the irregular limestone surface. Late Pliocene regression culminated in the Holocene with erosion. The Walanae fault zone, part of a major regional sinistral strike-slip system, separates the East and West Sengkang Basins. Both normal and reverse faulting are inferred from seismic data and post Late Pliocene reverse faulting is seen in outcrop.     

A POORLY GRAPHITISED CARBON CONTAMINANT IN STUDIES OF EXTRATERRESTRIAL MATERIALS

Poorly-graphitised carbon particles are formed during manufacture of sample substrates (holey carbon films) for Analytical Electron Microscopy studies of small particles. The particles form during heat treatment of cellulose acetobutyrate at about 975 °C and 1050 °C. In AEM studies of fine-grained carbonaceous extraterrestrial materials, these particles are easily recognised.     

AN EVALUATION OF SAS/GRAPH SOFTWARE FOR COMPUTER CARTOGRAPHY1

The SAS® computer software system, widely used and respected for its capabilities in statistical analysis and data base management, now includes a new set of graphic and cartographic procedures called SAS GRAPH?. We have used these cartographic procedures in research on mapping ethno-cultural census data from metropolitan areas in Ontario and in undergraduate and graduate courses in computer cartography. On the basis of that experience, we describe and evaluate SAS/GRAPH'S cartographic capabilities and illustrate with maps drawn by various devices.     

Microstructures of co-axially folded vein segments and crenulation cleavage： Evidence for dissolution phenomena in the Chamba Thrust Sheet, western Himalayas

The metasediments in the Chamba region experienced three phases of deformation: DF1, DF2 and DF3.Folded quartz veins are co-folded with the F2 crenulation folds. Their geometric and tectonic significance is studied by microstructures and shortening adjacent to the discrete crenulation cleavage, S2. Microstructures of folded vein segments, their geometric changes and truncation to cleavage (S2) are mainly due to pressure-solution phenomena and the estimated volume loss from reconstructed vein segments range from 16 to 25.5%,which is closely related to volume decrease (26%) calculated from the polydeformed slates of North Wales areas.