Geomechanical modeling of hydrate‐bearing sediments during dissociation under shear

Methane hydrate‐bearing sediments exist throughout the world in continental margins and in Arctic permafrost. Hydrates are ice‐like compounds when dissociate due to temperature rise or reduction in fluid pressure, release gas. Because of the mechanical property changes caused by dissociation in which the loads supported by the hydrates are transferred to soil grains, these sediments may become unstable. To quantify the risk of ground instability triggered by dissociation, which may happen during operation to extract methane gas or from climate changes, a reliable predictive model is indispensable. Even though many models have been proposed, a detailed validation of the ability to model dissociation impact is still needed. This study investigated the adequacy of an spatially mobilized plane constitutive model and a modeling framework using laboratory‐induced dissociation tests under shear from literature. Using laboratory‐imposed temperature and pressure changes and the resulting hydrate saturation changes as input, this study was able to capture the geomechanical responses and determine the stability state of methane hydrate‐bearing sediments as observed. Copyright © 2017 John Wiley & Sons, Ltd.     

Three-dimensional analysis of bearing behavior of piled raft on soft clay

The piled raft has proved to be an economical foundation type compared to conventional pile foundations. However, there is a reluctance to consider the use of piled rafts on soft clay because of concerns about excessive settlement and insufficient bearing capacity. Despite these reasons, applications of piled rafts on soft clay have been increased recently. Current analysis methods for piled rafts on soft clay, however, are insufficient, especially for calculating the overall bearing capacity of the piled raft. This study describes the three-dimensional behavior of a piled raft on soft clay based on a numerical study using a 3D finite element method. The analysis includes a pile–soil slip interface model. A series of numerical analyses was performed for various pile lengths and pile configurations for a square raft subjected to vertical loading. Relatively stiff soil properties and different loading types were also used for estimating the bearing behavior of the piled raft. Based on the results, the effect of pile–soil slip on the bearing behavior of a piled raft was investigated. Furthermore, the proportion of load sharing of the raft and piles at the ultimate state and the relationship between the settlement and overall factor of safety was evaluated. The results show that the use of a limited number of piles, strategically located, might improve both bearing capacity and the settlement performance of the raft.     

Shear Load Transfer Characteristics of Drilled Shafts Socketed in Rocks

This paper presents a shear load transfer function and an analytical method for estimating the load transfer characteristics of rock-socketed drilled shafts subjected to axial loads. A shear load transfer (f–w) function of rock-socketed drilled shafts is proposed based on the constant normal stiffness (CNS) direct shear tests. It is presented in terms of the borehole roughness and the geological strength index (GSI) so that the structural discontinuities and the surface conditions of the rock mass can be considered. An analytical method that takes into account the coupled soil resistance effects is proposed using a modified Mindlin’s point load solution. Through comparisons with load test results, the proposed methodology is in good agreement with the general trend observed in in situ measurements and represents an improvement in the prediction of the shear behavior of rock-socketed drilled shafts.     

Eocene I-type magmatism in the Eastern Pontides,NE Turkey: insights into magma genesis and magma-tectonic evolution from whole-rock geochemistry,geochronology and isotope systematics

ABSTRACT

The Eastern Pontides orogenic belt in NE Turkey hosts numerous I-type plutons of Eocene epoch. Here, we report new U–Pb SHRIMP zircon ages and in situ zircon Lu-Hf isotopes along with bulk-rock geochemical and Sr-Nd-Pb-O isotope data from the Kemerlikda??, Ayd?ntepe and Pelitli plutons and mafic microgranular enclaves (MMEs) to constrain their parental melt source(s) and evolutionary processes. U-Pb SHRIMP zircon dating yielded crystallization ages between 45 and 44 Ma for the studied plutons and their MMEs. The plutons range from gabbro to granite and have I-type, medium to high-K calc-alkaline, and metaluminous to slightly peraluminous characteristics. On the primitive mantle-normalized multi-trace-element variations, the plutons and their MMEs are characterized by signi?cant enrichment in LILE/HFSE. Chondrite-normalized REE patterns of the plutons and their MMEs are close to each other and show moderate enrichment with variable negative Eu anomalies. The studied plutons have fairly homogeneous isotope composition (⁸⁷Sr/⁸⁶Sr_(i) = 0.70502 to 0.70560; εNd_(i) = +0.9 to – 1.4; δ¹⁸O = +5.0 to +8.7‰, εHf_(i) = – 2.2 to +13.5). The MMEs show medium to high-K calc-alkaline and metaluminous character. Although the isotope signatures of the MMEs (⁸⁷Sr/⁸⁶Sr_(i) = 0.70508 to 0.70542; εNd_(i) = +0.9 to ?1.1; δ¹⁸O = +5.8 to +8.0, εHf_(i) = +4.3 to +10.4) are very similar to those of the host rocks. Fractionation of plagioclase, amphibole, pyroxene and Fe-Ti oxides played an important role in the evolution of the plutons. The isotopic composition of the studied plutons and MMEs are similar to I-type plutons derived from mantle sources. The MMEs show incomplete magma mixing/mingling, representing small bodies of mafic parental magma. The parental magma(s) of the studied plutons were generated from the enriched lithospheric mantle and then modified by fractional crystallisation, and lesser assimilation and mixing/mingling in the crustal magma chambers.     

Influence of rainfall-induced wetting on the stability of slopes in weathered soils

Shallow failures of slopes in weathered soil are caused by infiltration due to prolonged rainfall. These failures are mainly triggered by the deepening of the wetting band accompanied by a decrease in matric suction induced by the water infiltration. This paper reports trends of rainfall-induced wetting band depth in two types of weathered soils that are commonly found in Korea. Both theoretical and numerical analyses for wetting band depth are presented based on the soil–water characteristic curve obtained using filter paper as well as tensiometer tests. It is found that the magnitude of wetting front suction plays a key role in the stability of slopes in weathered soils. Theoretical analysis based on modified Green and Ampt model tends to underestimate the wetting band depth for typical Korean weathered soils. It was also deduced that for Korean weathered soils, the factor of safety drops rapidly once the wetting band depth of 1.2 m reached.     

Microscopic observation and contact stress analysis of granite under compression

To study the damage process of microscale to macroscale in coarse-grained granite specimen under uniaxial compressive stress, we have observed micro-damage localization and propagation by using a newly developed experimental system that allows us to observe the damaging process continuously.

The results showed that pre-existing microcracks lead to macroscopic shear fracture through the damage development process. The mechanism of micro-damage initiation in a granite specimen under uniaxial compressive stress may be considered for two cases. One is that two grains such as quartz and feldspar contact each other in the same direction as the axial stress, and the other is that a biotite grain inclined to the axial stress direction is surrounded by feldspar grains. The homogenization theory was applied to verify numerically the micromechanics of stress-induced damage in the mineral contacts. Local stress distribution in the periodic-micro structure was also calculated by the homogenization theory. It is shown that this analysis, which takes into account the initial state of the specimen, is well adapted to the behavior of two grains for which microcracking is the fundamental mechanism of damage.     

Local outlier factor as part of a workflow for detecting and attenuating blending noise in simultaneously acquired data

A number of deblending methods and workflows have been reported in the past decades to eliminate the source interference noise recorded during a simultaneous shooting acquisition. It is common that denoising algorithms focusing on optimizing coherency and weighting down/ignoring outliers can be considered as deblending tools. Such algorithms are not only enforcing coherency but also handling outliers either explicitly or implicitly. In this paper, we present a novel approach based on detecting amplitude outliers and its application on deblending based on a local outlier factor that assigns an outlier-ness (i.e. a degree of being an outlier) to each sample of the data. A local outlier factor algorithm quantifies outlier-ness for an object in a data set based on the degree of isolation compared with its locally neighbouring objects. Assuming that the seismic pre-stack data acquired by simultaneous shooting are composed of a set of non-outliers and outliers, the local outlier factor algorithm evaluates the outlier-ness of each object. Therefore, we can separate the data set into blending noise (i.e. outlier) and signal (i.e. non-outlier) components. By applying a proper threshold, objects having high local outlier factors are labelled as outlier/blending noise, and the corresponding data sample could be replaced by zero or a statistically adequate value. Beginning with an explanation of parameter definitions and properties of local outlier factor, we investigate the feasibility of a local outlier factor application on seismic deblending by analysing the parameters of local outlier factor and suggesting specific deblending strategies. Field data examples recorded during simultaneous shooting acquisition show that the local outlier factor algorithm combined with a thresholding can detect and attenuate blending noise. Although the local outlier factor application on deblending shows a few shortcomings, it is consequently noted that the local outlier factor application in this paper obviously achieves benefits in terms of detecting and attenuating blending noise and paves the way for further geophysical applications.     

Investigation of the dynamic behaviour of a storage tank with different foundation types focusing on the soil‐foundation‐structure interactions using centrifuge model tests

This paper proposes a dynamic centrifuge model test method for the accurate simulation of the behaviours of a liquid storage tank with different types of foundations during earthquakes. The method can be used to determine the actual stress conditions of a prototype storage‐tank structure. It was used in the present study to investigate the soil‐foundation‐structure interactions of a simplified storage tank under two different earthquake motions, which were simulated using a shaking table installed in a centrifuge basket. Three different types of foundations were considered, namely, a shallow foundation, a slab on the surface of the ground connected to piles and a slab with disconnected piles. The test results were organised to compare the ground surface and foundation motions, the slab of foundation and top of structure motions and the horizontal and vertical motions of the slab, respectively. These were used to establish the complex dynamic behaviours of tank models with different foundations. The effects of soil–foundation–structure interaction with three foundation conditions and two different earthquake motions are focused and some important factors, that should be considered for future designs are also discussed in this research. Copyright © 2017 John Wiley & Sons, Ltd.     

R/V Isabu-Based First Ultraclean Seawater Sampling for Ocean Trace Elements in Korea

Ocean Science Journal - Trace elements (Mn, Fe, Co, Ni, Cu, Zn, etc.) are essential micronutrients for marine organisms and are thus related to major issues in the ocean, such as climate change,...