Dolomitic marbles and associated calc-silicates, Tandilia belt, Argentina: Geothermobarometry, metamorphic evolution, and P–T path

The metamorphic evolution of dolomitic marbles and associated calc-silicate rocks from Punta Tota (NE Tandilia belt, Buenos Aires province, Argentina) has been evaluated through petrographic, geothermobarometric, and fluid inclusion studies. Thin beds of dolomitic marble are intercalated in amphibolites and constitute the upper part of a stratified basement sequence, which starts at the base with garnet migmatites showing a great abundance of pegmatitic segregates, overlain by biotite–garnet gneisses. Peak metamorphic conditions are estimated at 750–800 °C and 5–6 kb, followed by near isobaric cooling to about 500–450 °C and 5.5–6.5 kb. Anhydrous progressive metamorphic assemblages in both marbles (Fo + Cal + Dol + Cpx + Spl) and adjacent calc-silicate rocks (Cpx + An + Cal + Qtz) strongly retrogressed to hydrous minerals (Tr, Tlc, Grs, Czo, Srp) with decreasing temperatures and increasing water activities. The intense rehydration of the rocks relates to the emplacement of volatile-rich pegmatitic bodies (Qtz + Pl + Kfs + Bt + Grt), which also resulted in the crystallization of clinochlore + phlogopite in the marble and biotite + muscovite in the adjacent calc-silicate rocks. Metamorphic reactions based on textural relations and evaluated on a suitable petrogenetic grid, combined with geothermobarometric results and fluid inclusion isochores, indicate a metamorphic evolution along a counterclockwise P–T path. Two probable geotectonic settings for the determined P–T trajectory are proposed: (1) thinning of the crust and overlying supracrustal basin in an ensialic intraplate tectonic setting and (2) development of a marginal back-arc basin, associated with an oceanic–continental convergent plate margin. In both models, the initial extensional regime is followed by a compressional stage, with overthickening of the basement and supracrustal rocks, during the climax of the Transamazonian cycle at approximately 1800 Ma ago. Continuous convergence and blockage of structures produce transition to transcurrent tectonics (transpression) with a consequent moderate uplift.     

Central Chile: An example of quasi-static crustal behavior

Abstract Indications of transient crustal displacement associated with the 3 March 1985, M, = 7.8, Central Chile earthquake are evidenced by various observational devices. Almost half a meter of coastal uplift at localities close to the epicentral region was detected by repeated leveling lines. A tide gauge at Valparaiso revealed minor coseismic coastal subsidence (∼ 10 cm) continuously developing after the earthquake. Two limnigraphs, 27 km apart, that were situated at the extremes of Rapel Lake to the south of the leveling line, have recorded continuously the equipotential lake level for more than 10 years, providing a permanent very-long-base tiltmeter. The water level difference at the two limnigraphs as a function of time resembles a ramp function, beginning approximately at the time of the earthquake occurrence and gradually developing over a period of 10 months with a maximum amplitude of 120 mm or 4.4 p radians in tilt. The shape of the time-dependent tilt is mimicked by the sea level signal recorded at Valparaiso, ∼ 100 km away from Rapel Lake, showing a maximum coastal subsidence of 0.6 m. Comparisons of sea level changes produced by the 1971, M, = 7.5, earthquake indicates that they represent rupture in different portions along the seismogenetic region as well as a different rupture mode. Gravity surveys carried out in three different pre- and post-seismic epochs, along the segment of the leveling line which shows major coseismic uplift, indicate that the whole region has subsided, post-seismically, 10 em in 5 years. These observations are interpreted in terms of a variable slip dislocation model. Inversions show that it is the more than 2 m of fault displacement in 10 months of post-seismic movement along the contact between the Nazca and South America plates, which is interpreted to be responsible for the time-dependent elevation changes.     

Designing policies to mitigate the agricultural contribution to climate change: an assessment of soil based carbon sequestration and its ancillary effects

Soil carbon sequestration has been regarded as a cheap and cost-effective way to sequester carbon until other technologies to tackle climate change become available or more cost-effective. An assessment of the social desirability of a soil carbon sequestration policy requires the consideration of all associated social costs and benefits. Measures to re-accumulate carbon in soils have ancillary or co-effects on the environment that can be beneficial or detrimental to social welfare and few of which are traded in markets. This paper discusses issues related to the development of soil carbon sequestration policies into agri-environmental schemes and reports findings from an application of a choice experiment to elicit preferences and estimate benefits of a soil carbon programme in Scotland under consideration of co-effects on biodiversity and rural viability. Preferences for soil carbon based mitigation are found to be heterogeneous and related to beliefs about climate change and attitudes towards its mitigation. Benefit estimates suggest that including co-effects can significantly change the outcome of cost?Cbenefit tests. Implications for the development of climate change policies are discussed.     

Relationship between bedload and suspended sediment in the sand-bed Exu River,in the semi-arid region of Brazil

Abstract

Suspended sediment and bedload discharges in sand-bed rivers shape semi-arid landscapes and impact sediment delivery from these landscapes, but are still incompletely understood. Suspended sediment and bedload fluxes of the intermittent Exu River, Brazil, were sampled by direct measurements. The highest suspended sediment concentration observed was 4847.4 mg L^-1 and this value was possibly associated with the entrainment of sediment that was deposited in the preceding year. The bedload flux was well related to the stream power and the river efficiently transported all available bedload with a mean rate of 0.0047 kg m^-1 s^-1, and the percentage of bedload to suspended sediment varied between 4 and 12.72. The bed sediment of Exu River was prone to entrainment and showed a proclivity for transport. Thus, sand-bed and gravel-bed rivers of arid environments seem to exhibit the same mobility in the absence of armour layer.

Editor D. Koutsoyiannis; Associate editor B. Touaibia

Citation Cantalice, J.R.B., Cunha Filho, M., Stosic, B.D., Piscoya, V.C., Guerra, S.M.S., and Singh, V.P., 2013. Relationship between bedload and suspended sediment in the sand-bed Exu River, in the semi-arid region of Brazil. Hydrological Sciences Journal, 58 (8), 1789–1802.     

Weakening of gneiss surfaces colonized by endolithic lichens in the temperate climate area of northwest Italy

A role of lithobionts in geomorphological processes is increasingly argued, but the spatio‐temporal scale of their impact is largely unexplored in many ecosystems. This study first characterizes in the temperate zone (northwest Italy) the relationships between lithobiontic communities including endolithic lichens and the hardness of their siliceous rock substrate (Villarfocchiardo Gneiss). The communities are characterized, on humid and xeric quarry surfaces exposed for decades and natural outcrops exposed for centuries, in terms of lichen and microbial constituents, using a combined morphological and molecular approach, and with regard to their development on and within the gneiss. A lichen species belonging to Acarosporaceae (Polysporina‐Sarcogyne‐Acarospora group, needing taxonomic revision) chasmoendolithically colonizes both the humid and xeric quarry surfaces, on which epilithic cyanobacterial biofilms and epilithic pioneer lichens respectively occur. Light and electron microscopic observations show the development of the endolithic thalli within rock microcracks and the hyphal penetration along crystal boundaries down to depths of 1 to 3 mm, more pronounced within the humid surfaces. Such colonization patterns are likely related to biogeophysical deterioration, while no chemical alteration characterizes minerals contacted by the endolithic lichen. By contrast, on natural outcrops, where the endolithic colonization is negligible, a reddish rind below epilithic lichens indicates chemical weathering processes. Schmidt Hammer measurements highlight that the endolithic lichens deeply affect the hardness of the gneiss (down to ?60% with respect to fresh controls and surfaces only colonized by cyanobacteria), exerting a significantly higher weakening effect with respect to the associated epilithic lithobionts. The phenomenon is more remarkable on humid than on xeric quarry surfaces and natural outcrops, where epilithic lichens are likely involved in long‐term hardening processes supporting surface stabilization. Endolithic lichens are thus active biogeomorphological agents at the upper millimetric layer of siliceous rocks in temperate areas, exerting their weakening action during the early decade‐scaled stages of surface exposure. Copyright © 2015 John Wiley & Sons, Ltd.     

The Crati Submarine Fan, Ionian Sea

The Crati Fan is located in the tectonically active submerged extension of the Apennines chain and foretrough. The small fan system is growing in a relatively shallow (200 to 450 m), elongate nearshore basin receiving abundant input from the Crati River. The fan is characterized by a short, steep, channelized section (inner or upper fan) and a smooth, slightly bulging distal section (outer or lower fan). The numerous subparallel channels head in the shelf or littoral zone and do not form branching distributary patterns. Sand and mud depositional lobes of the outer fan stretch over more than 60% of fan length. Margin setting represents fan and/or source area     

Improved external device for a mass‐carrying sliding system for shaking table testing

Shaking tables are suitable facilities to assess and validate the behavior of structures and nonstructural components under actual seismic actions. Because of the size and weight limitations of the tables, some approaches, like testing reduced‐scale models or testing only the main structural components, are deemed necessary. In these cases, to comply with modeling requirements, large amount of extra‐mass should be added to the specimen. Therefore, to avoid the risk of lateral instability of models, to maintain the weight of test specimens within table payload, while maintaining the amount of mass needed, an external device for transmitting the inertia forces to the models using an improved sliding system is proposed. Although friction devices for similar purposes have been developed using sliding bearings (Teflon pads or rollers), the measured coefficient of dynamic friction and the energy dissipated by friction have been very high. In order to drastically diminish the damping added to the specimen response when a friction device is used, the improved device employs a linear motion guide system (LMGS) with very low friction. Shaking table tests to collapse of reinforced concrete walls were used to evaluate the effectiveness of the proposed device. Measured dynamic friction coefficients, spectral accelerations and hysteresis loops show that friction developed in the LMGS did not add any significant amount of damping into the specimen response. Thus, the proposed device is a reliable and suitable mass‐carrying sliding system (MCSS) for dynamic testing using medium‐size shaking tables. Copyright © 2010 John Wiley & Sons, Ltd.     

Due casi di grave inquinamento di acque sotterranee

Riassunto Ricercate le cause e le modalità secondo le quali si è verificato un vasto inquinamento da cromati alcalini nella falda acquifera della zona di Spinetta Marengo (Alessandria), l'A., mediante il rilevamento chimico-colorimetrico della diffusione dell'inquinamento, esaminate le caratteristiche della falda, introduce un nuovo metodo per determinare analiticamente e graficamente le variazioni della concentrazione. — A proposito di altro inquinamento da arseniato sodico verificatosi in un pozzo al Muggiano (La Spezia) vengono esaminate le caratteristiche in rapporto alla natura geologica del terreno.

---

Summary The A. had researched the cause and modality of the large defilement of alkalines chromates in the ground-water-flow of the zone of Spinetta Marengo (Alessandria). By means of chemical and colourimetrical methods, he examined the characteristics of the diffusion of the defilement and present a new method to determine analytically and graphically the variation of the concentration in every point of the zone. — After, the A. examined an other defilement of sodium-arseniate in a well of Muggiano (La Spezia) in reference to the geological feature of the ground.

     

Anthropogenic input of heavy metals in two Audouin’s gull breeding colonies

Anthropogenic activities have become an important source of heavy metals to the marine environments. Biological sentinels like seabirds’ chicks have been widely used to monitorize the levels of some heavy metals. Due to its mainly marine foraging habits, Audouin’s gull fits well for this purpose. Mercury and lead levels were measured in mantle feathers of Audouin’s gull chicks from two colonies in NE Iberian Peninsula: the Ebro Delta and the Llobregat Delta. Both are anthropized areas subject to differential pollutant inputs. Lead levels were significantly higher in the Llobregat Delta probably due to the use of leaded fuel in the nearby Barcelona airport. On the other side, mercury concentrations were higher in the Ebro Delta, in relation with the disposal of the toxic sediments at the Flix site carried down by the Ebro River. These mercury levels in the Ebro chicks reached values that have been described as toxic.     

Grain-size dependence of sediment composition and environmental bias in provenance studies

This article investigates both experimentally and theoretically the compositional changes associated with textural effects and hydraulic sorting during sediment transport and deposition, which cause systematic distortion in quantitative provenance analysis (“environmental bias”). Traditional procedures aimed at eliminating textural noise find limited success. The Gazzi–Dickinson method cannot remove hydrodynamic-related modal variability. Multiple size-window strategies are time-consuming. Narrow or moving size-window strategies represent misleading or impractical short cuts, being less convenient options than simply analysing each sample in bulk. New concepts introduced here unravel the superposed causes of compositional variability in modern sediments. Intrasample modal variability, fundamentally explained by settling-equivalence relationships, can be accurately modelled mathematically. Intersample modal variability, principally resulting from selective entrainment, can be assessed and removed by a simple principle. In absence of provenance changes and environmental bias, the weighted average density of terrigenous grains (SRD index) should be equal, for each sample and each grain-size class of each sample, to the weighted average density of source rocks. By correcting relative abundances of detrital minerals in proportion to their densities, we can restore the appropriate SRD index for any provenance and subprovenance type in each sample or grain-size class. Modal variability is effectively reduced by this procedure, which can be applied confidently to modern sediments deposited by tractive currents in any environment. Good results are obtained even for placer sands and finest classes where heavy-mineral concentration is strongest. Such “SRD correction” also successfully compensates for biased narrow-window modes, thus providing a numerical solution of general validity to the problem of environmental bias in sedimentary petrology. After compensating for settling-equivalence and selective-entrainment effects, residual size-dependent compositional variability may be provenance-related. Minor in Ganga–Brahmaputra sediments, provenance-related effects are spectacularly displayed in the Nile basin, where volcaniclastic silt mixes with basement-derived quartzofeldspathic sand and wind-blown Saharan quartz.