Snow measurement techniques for land-surface-atmosphere exchange studies in boreal landscapes

Summary  Snow has been studied widely in hydrology for many decades whereas recent meteorological interest in snow is caused by increased emphasis on high latitudes and wintertime in climate-change research as well as by the need to improve weather-forecast models during these conditions. Ground-based measurements of snow properties are needed both to improve understanding of surface-atmosphere exchange processes and to provide ground truth to new remote-sensing algorithms. This justifies a review of techniques to measure snow in combination with establishment of criteria for the suitability of the methods for process studies. This review assesses the state-of-art in ground-based snow-measurement techniques in the end of the 1990s in view of their accuracy, time resolution, possibility to automate, practicality and suitability in different terrain. Methods for snow-pack water equivalent, depth, density, growth, quality, liquid-water content and water leaving the snow pack are reviewed. Synoptic snow measurements in Fennoscandian countries are widely varying and there is no single standard on which process-related studies can build. A long-term, continuous monitoring of mass and energy properties of a snow cover requires a combination of point-measurement techniques. Areally representative values of snow properties can be achieved through a combination of automatically collected point data with repeated manual, areally covering measurements, remote-sensing data and digital elevation models, preferably in a GIS framework. Received August 27, 1999     

A case study of warm air advection over a melting snow surface

When relatively warm, moist air moves over a snow surface, sensible heat and moisture are extracted from its lower layers and used to melt the snow. The depth of the cooled layer depends on horizontal wind speeds and the presence of high vertical wind shear. The mechanism for air mass modification appears to be turbulent mixing.     

A 2D finite volume model for bebris flow and its application to events occurred in the Eastern Pyrenees

FLATModel is a 2D finite volume code that contains several original approaches to improve debris-flow simulation. Firstly, FLATModel incorporates a ＂stop-and-go＂ technique in each cell to allow continuous collapses and remobilizations of the debris-flow mass. Secondly, flow velocity and consequently yield stress is directly associated with the type of rheology to improve boundary accuracy. Thirdly, a simple approach for entrainment is also included in the model to analyse the effect of basal erosion of debris flows. FLATMODEL was tested at several events that occurred in the Eastern Pyrenees and simulation results indicated that the model can represent rather well the different characteristics observed in the field.     

Diurnal variation of deep cloud systems over the Indian region using INSAT-1B pixel data

Summary Among the various time scales of deep clouds, diurnal variation is found to be prominent over the tropics. The present study examines the diurnal variation in the number and area cover associated with the cloud systems over the tropical Indian region using INSAT-1B pixel data. Three periods, namely, April–May 1988, July–August 1988, and January–February 1989 are considered. The dependence of diurnal characteristics on the temperature threshold, life duration and size of cloud systems, and land-sea contrast has been explored. The diurnal characteristics of cloud systems living for more than a day have been studied for the first time. It is shown that cloud systems exhibit strong diurnal dependence at the coldest temperature threshold used (201 K). Also, the diurnal variation is more for larger cloud systems and for longer living systems. In general, more deep cloud activity is found from the satellite data during the pre-dawn and early morning hours. Precipitation is enhanced during morning to early noon hours. Further, using data from a recent field experiment, clear evidence of diurnal variation in precipitation over the Bay of Bengal is also presented. Received March 20, 2000/Revised October 3, 2000     

Enhancement of the method of summer precipitation forecasting

The physical-synoptic principles of the automated method of summer precipitation forecasting introduced into operational prognostic practice in 2006 by the decree of the Central Methodical Commission of the Federal Service for Hydrometeorology and Environmental Monitoring (Roshydromet) are presented. Beside that, improved modifications of this method, which are automatically updated, are shown. Validation of those updates based on observational data collected in 2004 has shown improvement of all major criteria of forecasts efficiency. The performed improvement is based on the more detailed quantitative realization of mechanism of various showers formation (including heavy rainfalls).     

Authigenic iron and titanium oxides in triassic red beds: (St. Bees Sandstone), Cumbria,Northern England

Authigenic iron and titanium oxides occur in three main textural varieties in the St. Bees Sandstone, a Triassic red bed succession in Cumbria. These are: (a) overgrowths of haematite, titaniferous haematite, anatase, and rutile which generally occur on detrital host grains of similar compositions. The overgrowths may occur as syntaxial rim cements or rhombohedral and prismatic projections and are always in optical continuity, (b) discrete crystals of anatase (including octahedrite) and haematite 10-40 μm in size occur in pore spaces, and (c) fine grained ( < 1 μm) pigmentary haematite occurs as grain coatings around detrital grains and in the interstitial matrix. The euhedral nature and pore-filling habit clearly indicate the authigenic origin of these iron- and titanium oxides. All three textural varieties are believed to have been precipitated from ground waters containing dissolved ferrous and titanium ions. These ions were derived from the intrastratal solution of detrital iron and titanium bearing grains including ferromagnesian silicates and iron-titanium oxides. The precipitation of iron oxides from migrating ground waters in the manner described here goes some way to explaining how thick, uniformly red successions can be formed.     

Measures of Parameter Uncertainty in Geostatistical Estimation and Geostatistical Optimal Design

Studies of site exploration, data assimilation, or geostatistical inversion measure parameter uncertainty in order to assess the optimality of a suggested scheme. This study reviews and discusses measures for parameter uncertainty in spatial estimation. Most measures originate from alphabetic criteria in optimal design and were transferred to geostatistical estimation. Further rather intuitive measures can be found in the geostatistical literature, and some new measures will be suggested in this study. It is shown how these measures relate to the optimality alphabet and to relative entropy. Issues of physical and statistical significance are addressed whenever they arise. Computational feasibility and efficient ways to evaluate the above measures are discussed in this paper, and an illustrative synthetic case study is provided. A major conclusion is that the mean estimation variance and the averaged conditional integral scale are a powerful duo for characterizing conditional parameter uncertainty, with direct correspondence to the well-understood optimality alphabet. This study is based on cokriging generalized to uncertain mean and trends because it is the most general representative of linear spatial estimation within the Bayesian framework. Generalization to kriging and quasi-linear schemes is straightforward. Options for application to non-Gaussian and non-linear problems are discussed.     

Formation Mechanism of Mud Bank Along the Southwest Coast of India

Mud bank formation during the southwest monsoon along the southwest coast of India remains an enigma to the researchers and coastal community in spite of several earlier studies. The present study attempts to unravel the mystery through a high-frequency, season-long time-series observation at Alappuzha, located at the southern part of the west coast of India, a region of frequent occurrence of mud bank. Using 7-month-long weekly time-series observation, we identified strong winds and high waves associated with onset of the southwest monsoon and subsequent three episodic atmospheric low-pressure events (LPEs).With the help of in situ time-series data, we show that the strong winds and high waves associated with southwest monsoon pre-conditions the near shore bottom sediment to bring it into suspension. The high amplitude waves associated with the southwest monsoon, while propagating from the deep water to shallow water region, interact with the bottom initiating bottom-sediment movement and its suspension due to wave refraction and shoaling. The sporadic occurrence of the atmospheric LPEs enhances the process of suspension of bottom sediment in the near shore region leading to the formation of fluid mud. Simulations with a cohesive sediment transport model yielded realistic estimates of sediment transport, in the presence of an onshore current, a pre-requisite for transporting the fluid mud toward the coast. The prevailing onshore upwelling current during the southwest monsoon provides the favorable pre-requisite conditions for transporting the fluid mud through depression channel network towards the coast. Once sufficient quantity and thickness of fluid mud is accumulated in the near shore region, it acts as a wave damper for subsequent high monsoon waves, as indicated by the time-series wave data, leading to the formation of tranquil mud bank region. Depression channel networks extending from the shelf to the coast off Alappuzha, Kochi, Ponnani, Beypore, and Ullal were found in the bathymetric charts, thus explaining why mud banks occur only at few locations in spite of the prevalence of similar monsoon conditions.     

Platinum-group elements in alpine-type ultramafic rocks and related chromite ores of the main ophiolite belt of the Urals

On the basis of a representative collection of ultramafic rocks and chromite ores and a series of technological samples from the largest (Central and Western) deposits in the Rai-Iz massif of the Polar Urals and the Almaz-Zhemchuzhina and Poiskovy deposits in the Kempirsai massif of the southern Urals, the distribution and speciation of platinum-group elements (PGE) in various type sections of mafic-ultramafic massifs of the Main ophiolite belt of the Urals have been studied. Spectral-chemical and spectrophotometric analyses were carried out to estimate PGE in 700 samples of ultramafic rocks and chromite ores; 400 analyses of minerals from rocks, ores, and concentrates and 100 analyses of PGE minerals (PGM) in chromite ores and concentrates were performed using an electron microprobe. Near-chondritic and nonchondritic PGE patterns in chromitebearing sections have been identified. PGE mineralization has been established to occur in chromite ore from all parts of the mafic-ultramafic massifs in the Main ophiolite belt of the Urals. The PGE deposits and occurrences discovered therein are attributed to four types (Kraka, Kempirsai, Nurali-Upper Neiva, and Shandasha), which are different in mode of geological occurrence, geochemical specialization, and placer-forming capability. Fluid-bearing minerals of the pargasite-edenite series have been identified for the first time in the matrix of chromite ore of the Kempirsai massif (the Almaz-Zhemchuzhina deposit) and Voikar-Syn’ya massif (the Kershor deposit). The PGE grade in various types of chromite ore ranges from 0.1–0.2 to 1–2 g/t or higher. According to technological sampling, the average PGE grade in the largest deposits of the southeastern ore field of the Kempirsai massif is 0.5–0.7 g/t. Due to the occurrence of most PGE as PGM 10–100 mm in size and the proved feasibility of their recovery into nickel alloys, chromites of the Kempirsai massif can be considered a complex ore with elevated and locally high Os, Ir, and Ru contents. The Nurali-Upper Neiva type of ore is characterized by small-sized primary deposits, which nevertheless are the main source of large Os-Ir placers in the Miass and Nev’yansk districts of the southern and central Urals, respectively.     

Geotechnical assessment of the bearing capacity of coal mine floors

Summary This investigation concerns 3 longwall faces having variable strata and mining conditions, but supported by 202 tonnes hydraulic 6-leg chocks. Bearing capacity tests along the faces were conducted to evaluate the factors influencing floor deformation and failure. The effect of size, shape and perimeter of the base plates, thickness of the floor layer, time and moisture on the ultimate bearing capacity of the floor was measured and discussed. Application of this work is the prediction of stability and support performance of face ends, as well as the design of support systems and ground control on production faces.